Seungin Min, Chankyu Son, and Taeseong Kim, "Impact of Leading-Edge Roughness on Dynamic Stall: A Comparative Study of Turbulence Models and Sand-Grain Roughness Correlations for Wind Turbine Airfoils," Renewable Energy, Under Review.
Bogdan Pamfil, Henrik Bredmose, Taeseong Kim, and Wei Yu, "Fast response methods for aero-elastic floating wind turbine design," Renewable Energy, Under Review.
Hyeongmin Moon, Inho Jeong, Haeseong Cho, and Taeseong Kim, “Dynamic Analysis of Rotating Composite Beam using Three-dimensional Co-rotational Formulation,” Computers and Structures, Under Review.
Elisabet Afonso, Anand Palanisamy Raj, Esben Thormann, Taeseong Kim, and Andreas Kaiser, "Anti-icing liquid-infused coating for wind turbine blades," ACS Applied Polymer Materials, Under Review.
Agnieszka Woźniak, Piotr, Strzelczyk, and Taeseong Kim, "Design of HAWT Rotor for Non-Uniform Inflow Conditions: A Theoretical and Experimental Approach for Shear Flow," Energy Science & Engineering, Under Review
Quick, J., Murcia Leon, J. P., Kock, C. W., Servizi, V., Overgaard, N. S., Dimitrov, N., Kelly, M., Réthoré, P.-E., & Kim, T. , "Wind speed vertical extrapolation model validation under uncertainty," Renewable Energy, 240, 122028, 2025, https://doi.org/10.1016/j.renene.2024.122028.
Bogdan Pamfil, Henrik Bredmose, and Taeseong Kim, "Coleman free aero-elastic stability methods for three- and two-bladed floating wind turbines," Wind Energy Science, Accepted, https://doi.org/10.5194/wes-2024-136
Hyeongmin Moon, Haeseong Cho, Stephanos Theodossiades, Amal Z. Hajjaj, and Taeseong Kim, “Development of nonlinear flat shell element with nonlinear thickness variation for highly flexible wind turbine blade,” Renewable Energy, Vol. 235, November, 2024.
Min, S., and Kim, T., “A CFD Analysis of Oscillating Airfoil with Leading Edge Roughness: Comparing Correlations for Equivalent Sand Grain Roughness,” In The Science of Making Torque from Wind (TORQUE 2024), 2024, https://doi.org/10.1088/1742-6596/2767/2/022045
Kim, T., Hou Lio, A. W., Lee, G. H., Choi, D. K., and Lee, S. Y., “An innovative segmented blade concept with a partial pitch control for large wind turbine systems,” In The Science of Making Torque from Wind (TORQUE 2024), 2024, https://doi.org/10.1088/1742-6596/2767/2/022026
Pamfil, B., Bredmose, H., and Kim, T., “Floating wind turbine stability and time response analysis with rotating modes,” In The Science of Making Torque from Wind (TORQUE 2024), 2024, https://doi.org/10.1088/1742-6596/2767/2/022057
Schepers, J. G., Adema, N. C., Lipian, M., Kulak, M., Shahid, A., Best, A., Bendre, T., Gallicchio, I., Elsabbagh, A., Mostafa, A., Kim, T., Mikkelsen, R., Gaunaa, M., Teuwen, J. J. E., Rudolf, R. T., Wood, D., and Holierhoek, J. G., “Lessons learned from 10 years of wind tunnel tests on small wind turbines designed by students,” In The Science of Making Torque from Wind (TORQUE 2024), 2024, https://doi.org/10.1088/1742-6596/2767/7/072009
Antunes, A. M., Verelst, D. R., Riva, R., Kim, T., Haselbach, P. U., Zahle, F., and Berring, P., “Static response of wind turbine blades: Comparison of low- and high-fidelity numerical models,” In The Science of Making Torque from Wind (TORQUE 2024), 2024, https://doi.org/10.1088/1742-6596/2767/5/052037
Inho Jeong, Hyejin Kim, Haeseong Cho, Hyungbum Park, and Taeseong Kim, “Initial structural damage detection approach via FE-based data augmentation and class activation map,” Structural Health Monitoring, Vol. 22 (5), 2023, pp.3225-3249.
Hyeongmin Moon, Haeseong Cho, Stephanos Theodossiades, and Taeseong Kim, “Development of an anisotropic co-rotational beam model including variable cross-section,” Mechanics of Advanced Materials and Structures, Vol. 30 (3), 2023, pp.423-436.
Hyeongmin Moon, Haeseong Cho, Stephanos Theodossiades, and Taeseong Kim, “Development of three-dimensional co-rotational beam model for non-linear dynamic analysis of highly flexible slender composite blades,” Mechanics of Advanced Materials and Structures, Vol. 30 (10), 2023, pp.1943-1954.
Qusay Hawari, Taeseong Kim, Christopher Ward, and James Fleming, “LQG control for hydrodynamic compensation on large floating wind turbines,” Renewable Energy, Vol. 205, March 2023, pp.1-9.
Taeseong Kim, Freddy J. Madsen, Henrik Bredmose, and Antonio Pegalajar-Jurado, “Numerical analysis and comparison study of the 1:60 scaled DTU 10 MW TLP floating wind turbine Renewable Energy,” Renewable Energy, Vol. 202, January 2023, pp.210-221.
Qusay Hawari, Taeseong Kim, Christopher Ward, and James Fleming, “A Robust Gain Scheduling Method for a PI Collective Pitch Controller of Multi-MW Onshore Wind Turbines,” Renewable Energy, Vol. 192, 2022, pp. 443-455.
Inho Jeong, Haeseong Cho, Chankyu Son, and Taeseong Kim, “Sustainable data-driven framework via transfer learning for icing-detection of high aspect ratio blades,” Cold Regions Science and Technology, Vol. 201., Sept. 2022, 103606.
Michael K. McWilliam, Antariksh Dicholkar, Frederik Zahle, and Taeseong Kim, “Post-optimum sensitivity analysis with automatically tuned numerical gradients applied to swept wind turbine blades,” energies, Vol. 15 (9), 2022, 2998.
Ozan Gözcü, Taeseong Kim, David R. Verelst, and Michael K. McWilliam, “Swept Blade Dynamic Investigations for 100kw Small Wind Turbine,” energies, Vol. 15 (9), 2022, 3005.
Chankyu Son and Taeseong Kim, “Boundary Conditions of Flow Transition Model in Reynolds Averaged Navier–Stokes Equations for Roughened Surface,” AIAA Journal, Vol. 60 (1), 2022.
Pierella, F., Avila, O. S., Sanz, C. G., Ashraf, A., Aitor, N. A., & Kim, T., ”Numerical simulations of a 15MW wind turbine on a concrete TLP with rigid pipe tendons,” EERA DeepWind Offshore Wind R&D Conference (1 ed., Vol. 2362), IOP Publishing. Journal of Physics: Conference Series https://doi.org/10.1088/1742-6596/2362/1/012030
Guanqun Xu, Wei Yu, and Taeseong Kim, “Wind turbine load estimation using machine learning and transfer learning,” Journal of Physics: Conference Series, Vol. 2265, 2022, doi:10.1088/1742-6596/2265/3/032108.
Ana I. M., Vivas and Taeseong Kim, “Dynamic Investigations between Two- and Threebladed Wind Turbines with Various Yaw, Tilt and Cone Angles,” Journal of Physics: Conference Series, Vol. 2265, 2022, doi:10.1088/1742-6596/2265/3/032051.
Taeseong Kim, Anand Natarajan, Anaïs Lovera, Emricka Julan, Christophe Peyrard, Matteo Capaldo, Guillaume Huwart, Pauline Bozonnet, and Martin Guiton, “A comprehensive code-to-code comparison study with the modified IEA15MW-UMaine Floating Wind Turbine for H2020 HIPERWIND project,” Journal of Physics: Conference Series, Vol. 2265, 2022, doi:10.1088/1742-6596/2265/4/042006.
Inho Jeong, Taeseong Kim, Haeseong Cho, “Displacement/Strain Based Structural Damage Detection Method Using Class Activation Map,” Journal of Wind Energy, Vol. 12 (3), 2021, pp. 45-54.
E. Guk, C. Son, L. Rieman and T. Kim, “Experimental study on ice intensity and type detection for wind turbine blades with multi-channel thermocouple array sensor,” Cold Regions Science and Technology, Vol. 189, 2021, 103297.
Chankyu Son, Mark Kelly and Taeseong Kim, “Boundary-Layer Transition Model for Icing Simulations of Rotating Wind Turbine Blades,” Renewable Energy, Vol. 167, 2021, pp.172-183.
Zhandos Baizhuma, Taeseong Kim and Chankyu Son “Numerical method to predict ice accretion shapes and performance penalties for rotating vertical axis wind turbines under icing conditions,” Journal of Wind Engineering & Industrial Aerodynamics, Vol. 216, September 2021, 104708.
L. Rieman, E. Guk, C. Son, J-S. Kim, and T. Kim, “Multi-Channel Thermocouple Array Sensor for In-Situ Monitoring of Ice Accretion on Wind Turbine Blades,” Sensors, Vol. 20 (8), 2020, 2165.
Chankyu Son and Taeseong Kim, “Development of an Icing Simulation Code for Rotating Wind Turbines,” Journal of Wind Engineering & Industrial Aerodynamics, Vol. 203, 2020, 104239.
Jaime Liew, Wai Hou Lio, Albert M. Urban, Jessica Holierhoek, and Taeseong Kim, “Active Tip Deflection Control for Wind Turbines,” Renewable Energy, Vol.149, 2020, pp.445-454.
Freddy J. Madsen, Thomas R.L. Nielsen, Taeseong Kim, Henrik Bredmose, Antonio Pegalajar-Jurado, Michael Borg, Robert F. Mikkelsen, Mahmood Mirzaei, Anders K. Lomholt and Pyungho Shin, “Experimental analysis of the scaled DTU10MW TLP floating wind turbine with different control strategies,” Renewable Energy, Vol. 155, 2020, pp.330-346.
Yu-Eop Kang, Seungin Min, Taeseong Kim, and Kwanjung Yee, “Initial Bead Growth and Distribution under Low Speed Icing Condition,” International Journal of Heat and Mass Transfer, Vol. 149,119115, 2020.
Yu-Eop Kang, Seungin Min, Taeseong Kim, and Kwanjung Yee, “Experimental Investigation on the Effect of Low-Speed Icing Condition to the Surface Roughness Formation,” Journal of the Korean Society for Aeronaturical and Space Sciences, Vol. 48 (2), 2018, pp.99-108.
Chankyu Son, Seungin Min, Taeseong Kim, Sun-Tae Kim, and Kwanjung Yee, “Icing Wind Tunnel Tests to Improve the Surface Roughness Model for Icing Simulations,” Journal of The Korean Society For Aeronautical and Space Science, Vol. 46 (8), pp. 611-620, 2018, (DOI : 10.5139/JKSAS.2018.46.8.611).
Michael K. McWilliam, Frederik Zahle, Antariksh C. Dicholkar, David R. Verelst, Taeseong Kim, “Optimal Aero-Elastic Design of a Rotor with Bend-Twist Coupling,” Journal of Physics: Conference Series, Vol. 1037, 2018, (DOI: https://iopscience.iop.org/article/10.1088/1742-6596/1037/4/042009).
Juan Pablo Murcia, Pierre-Elouan Rethore, Nikolay Dimitrov, Anand Natarajan, John D. Sørensen, Peter Graf, and Taeseong Kim, “Uncertainty propagation through an aeroelastic wind turbine model using polynomial surrogates,” Renewable Energy, Vol. 119, pp. 910-922, 2018.
Christian Pavese, Carlo Tibaldi, Frederik Zahle, Taeseong Kim, “Aeroelastic Multidisciplinary Design Optimization of a Swept Wind Turbine Blade,” Wind Energy, Online Available, 2017, (DOI: 10.1002/we.2131).
Christian Pavese, Taeseong Kim, and Juan Pablo Murcia, “Design of a Wind Turbine Swept Blade through Extensive Load Analysis,” Renewable Energy, Vol. 102, March 2017, pp. 21-34.
Georg Pirrung, Vasilis Riziotis, Helge Madsen, Morten Hartvig Hansen, and Taeseong Kim, “Comparison of a coupled near and far wake model with a free wake vortex code,” Wind Energy Science, 2, 2017, pp. 15-33.
Antonio Pegalajar-Jurado, Anders M. Hansen, Robert Laugesen, Robert F. Mikkelsen, Michael Borg, Taeseong Kim, Nicolai F. Heilskov, and Henrik Bredmose, “Experimental and numerical study of a 10MW TLP wind turbine in wave and wind,” Journal of Physics: Conference Series, Vol. 753, 2016, (DOI: http://iopscience.iop.org/article/10.1088/1742-6596/753/9/092007/meta).
Christian Pavese, Carlo Tibaldi, Torben J. Larsen, Taeseong Kim, and Kenneth Thomsen, “Reduced Design Load Basis for Ultimate Blade Loads Estimation in Multidisciplinary Design Optimization Frameworks,” Journal of Physics: Conference Series, Vol. 753, 2016, (DOI: 10.1088/1742-6596/753/6/062005).
Torben J. Larsen and Taeseong Kim, “Experimental and Numerical Study of Rotor Dynamics of a Two- and Three-bladed Wind Turbine,” Journal of Ocean and Wind Energy, Vol. 26, Issue 4, December 2016.
Minu Jeon, Soogab Lee, Taeseong Kim, and Seunghoon Lee, “Wake influence on dynamic load characteristics of offshore floating wind turbines,” AIAA Journal, Vol. 54, No. 11, 2016.
Georg Pirrung, Helge Madsen, Taeseong Kim, and Joachim Heinz, “A coupled near and far wake model for wind turbine aerodynamics,” Wind Energy, Vol. 19. Issue 11, November 2016.
Carlo Tibaldi, Taeseong Kim, Torben J. Larsen, Flemming Rasmussen, Raphaël Rocca-Serra and Francesc-Xavier Sanz, “An investigation on wind turbine resonant vibrations,” Wind Energy, Vol. 19 (5), May 2016, pp. 847-859, (DOI: 10.1002/we.1869).
Taeseong Kim, Torben J. Larsen, and Anders Yde, “Investigation of potential extreme load reduction for a two-bladed upwind turbine with partial pitch,” Wind Energy, Vol. 18 (8), 2015, pp. 1403-1419, (DOI: 10.1002/we.1766).
Torben J. Larsen and Taeseong Kim, “Experimental and numerical study of a new dynamic phenomenon for two-bladed wind turbines,” International Offshore and Polar Engineering Conference Proceeding, Vol. 2015-1, 2015, pp. 547-553.
Taeseong Kim, Mads M. Petersen, and Torben J. Larsen, “A comparison study of the two-bladed partial pitch turbine during normal operation and an extreme gust conditions,” Journal of Physics: Conference Series, Vol. 524 (1), 2014, (DOI: http://iopscience.iop.org/1742-6596/524/1/012065).
Georg Pirrung, Helge Madsen, and Taeseong Kim, “The influence of trailed vorticity on flutter speed estimations,” Journal of Physics: Conference Series, Vol. 524 (1), 2014, (DOI: http://iopscience.iop.org/1742-6596/524/1/012048).
Min-Soo Jeong, Sang-Woo Kim, Myung-Chan Cha, In Lee, and Taeseong Kim, “Effects of torsional degree of freedom, geometric nonlinearity, and gravity on aeroelastic behavior of large-scale horizontal-axis wind turbine blades under varying wind speed conditions,” Journal of Renewable and Sustainable Energy, Vol. 6 (2), 2014.
D. Castaignet, T. Barlas, T. Buhl, N.K. Poulsen, J.J. Wedel-Heinen, N.A. Olesen, C. Bak, and T. Kim, “Full-scale test of Trailing Edge Flaps on a Vestas V27 wind turbine, Active load reduction and system identification,” Wind Energy, Vol. 17 (4), 2014, pp. 549-564, (DOI: 10.1002/we.1589).
Jaehwan Lee, Balakumaran Natarajan, Wonjong Eun, Viswamurthy S R., Jae-Sang Park, Taeseong Kim and SangJoon Shin, “Structural and Mechanism Design of an Active Trailing-edge Flap Blade,” Journal of Mechanical Science and Technology, Vol. 27 (9), 2013, pp. 2605-2617.
Taeseong Kim, Anders M. Hansen, and Kim Branner, “Development of an Anisotropic Beam Finite Element for Composite Wind Turbine Blades in Multibody System,” Renewable Energy, Vol. 59, 2013, pp 172-183.
Taeseong Kim, Jaehoon Lim, SangJoon Shin, and Do-Hyung Kim, “Structural Design Optimization of a Tiltrotor Aircraft Composite Wing to Enhance Whirl Flutter Stability,” Composite Structures, Vol. 95, 2013, pp 283-294.
Taeseong Kim, SangJoon Shin, and Do-Hyung Kim, “An Influence of Geometric Coupling on Whirl Flutter Stability in Tiltrotor Aircraft with Unsteady Aerodynamics,” Journal of Aerospace engineering, Vol. 25 No. 1, 2012, pp 143-148.
Hyun-Ku Lee, S.R. Viswamurthy, SangChul Park, Taeseong Kim, SangJoon Shin, and Deog-Kwan Kim, “Helicopter Rotor Load Prediction Using a Geometrically Exact Beam with Multi-component Model,” Journal of Aircraft, Vol. 47 No. 4, 2010, pp 1382-1390.
Taeseong Kim, SangJoon Shin, and Taehyoun Kim, “Analysis of Tiltrotor Whirl Flutter in Time and Frequency Domain,” Journal of Mechanical Science and Technology, Vol 23 No. 12, December 2009, pp. 3281-3291.
Taeseong Kim and SangJoon Shin, “Advanced Analysis on Tiltrotor Aircraft Flutter Stability, Including Unsteady Aerodynamics,” AIAA Journal, Vol. 46, No. 4, April 2008, pp. 1002-1012.
Sung-Kyun Kim, Tae-Seong Kim and SangJoon Shin, “An Analysis on Vibration Loads Reduction using Individual Blade Control in Active Helicopter Rotors,” Journal of The Korean Society for Aeronautical and Space Sciences, Vol 35, No. 6, Jun 2007, pp. 496-502.