How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
If you want to repair a pair of Beats Studio3 (A1914) headphones you already own and bring them back to factory-fresh looks, choose Adhiper Studio3; if you need a complete, ready-to-play set of closed-back studio headphones for monitoring and everyday listening, choose Behringer HPS3000.
• Adhiper Studio3 — biggest strength: It's a direct-fit replacement shell and inner shell kit for the Beats Studio3 (A1914), sold as a full left/right set in gray, so you can rescue a headphone whose plastic has cracked, faded or gone grimy instead of buying a whole new pair.
• Adhiper Studio3 — biggest trade-off: It is not a headphone. There are no drivers, no cable, no electronics and no copper screw inserts in the box — it's a cosmetic and structural repair kit only, and installing the inner shells means disconnecting the wiring.
• Behringer HPS3000 — biggest strength: A finished, wired, closed-back over-ear studio headphone with 40 mm dynamic drivers, a 20 Hz–20 kHz frequency range and a padded circumaural fit built for long sessions — plus a desktop stand in the bundle.
• Behringer HPS3000 — biggest trade-off: The 6.6 ft (2 m) cable is non-detachable, so if it ever fails you're not swapping it out the way you would on a modular headphone, and the fit runs toward a firm, utility-style clamp rather than a featherweight feel.
• Who each pick is for: Adhiper Studio3 is for the owner of a damaged Studio3 who wants to keep the pair they love; Behringer HPS3000 is for someone who needs working headphones right now — for tracking, editing, gaming or casual listening.
Let's be blunt about what this product is, because half the confusion around it comes from people expecting headphones in the box. The Adhiper Studio3 kit is a set of four plastic pieces: a left outer shell, a left inner shell, a right outer shell and a right inner shell, finished in gray and made to fit the Beats Studio3.0 wireless over-ear headphone. It's described as matching the original equipment, and the enclosure material is plastic. That's it. No earphones, no copper inserts for the screws.
The honest skip case: if you don't already own a Studio3, this kit is useless to you. And if you're not comfortable opening up a headphone, pay attention to the manufacturer's own note — when installing the inner shell, you need to disconnect the wiring. If that sounds like more than you want to take on, look up an installation video first or reach out to the seller for guidance. There's a one-year warranty against manufacturers defects, so you're covered on the part itself, but the labor is on you. Buy it as a repair part, not as audio gear.
Behringer HPS3000: Who It's For
The HPS3000 is the opposite kind of purchase: a finished tool. It's a closed-back, over-ear studio headphone built around 40 mm dynamic drivers with a 20 Hz to 20 kHz frequency range — the full audible span, which is exactly what you want when you're checking whether a mix translates. The description points to strong low end and clean, transparent highs, which is the classic profile of a monitoring headphone rather than a bass-heavy consumer one.
The closed-back design is the feature that shapes everything else. Because the cups seal around your ears, you get passive noise isolation — external sound gets pushed down, and what's playing stays more contained. That makes these genuinely useful for tracking a vocalist or a guitarist in the same room as a mic, for editing late at night without waking anyone, and for plain focused listening on a laptop. The circumaural earpieces and padded headband are there to make long sessions tolerable, and the headband is described as ultra-rugged, which matters if these live in a gig bag.
Side-by-Side: Which Should You Choose?
• Best for fixing a broken or scuffed Beats Studio3 → Adhiper Studio3. It's a purpose-built shell kit for that exact model, in gray, with both outer and inner shells for each side.
• Best for actually listening to audio → Behringer HPS3000. One is a headphone; the other is a plastic housing. That's the whole decision in one line.
• Best for studio monitoring and tracking → Behringer HPS3000. Closed-back isolation plus a 20 Hz–20 kHz range and 40 mm dynamic drivers is the spec sheet of a working monitor.
• Best for long-session comfort → Behringer HPS3000. Padded headband plus circumaural earcups designed for extended wear.
• Best for keeping an existing pair out of the trash → Adhiper Studio3. If the drivers and battery are fine and only the shell is damaged, this is the cheaper, greener path.
• Best for plug-and-play with pro gear → Behringer HPS3000. Wired 6.35 mm jack with a 1/4" adapter in the box; no setup, no pairing, no charging.
• Best if you hate cables you can't replace → neither, honestly. The HPS3000's cable is non-detachable, and the Adhiper kit has no cable at all. Know that going in.
• Best for someone who wants zero fiddling → Behringer HPS3000. The Adhiper install requires you to disconnect wiring inside the earcup.
If I had to pick one, I'd buy the Behringer HPS3000. It's a finished product that does a job the moment you unbox it — wired, isolated, comfortable, and specced like a real monitoring headphone with its 40 mm drivers and 20 Hz–20 kHz range, with a stand included. In my opinion the Adhiper Studio3 is a good purchase only under one specific condition: you already own a Beats Studio3 whose shell is damaged and whose internals still work. If that's you, it's a smart, tidy fix. If it isn't, it's four pieces of gray plastic with nothing to plug in. Check the current price on Amazon before you commit to either.
FAQ
There's no single model, but the pattern is consistent: closed-back, over-ear designs with a wide frequency range for tracking and isolation. The HPS3000 fits that mold with its circumaural closed-back build, passive noise isolation and wired 6.35 mm connection.
The earcups surround your ears rather than pressing on them. Inside, drivers convert electrical signal into sound; the HPS3000 uses 40 mm dynamic drivers covering 20 Hz to 20 kHz. The closed-back cups seal against your head, which blocks outside noise and keeps sound from leaking out.
Slide the headband so the padded section rests on top of your head and the earcups sit fully around — not on — your ears, forming a seal. On the HPS3000, that seal is what makes the passive noise isolation work, so a proper fit matters more than clamping them tight.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: HIFIMAN Deva-Pro Over-Ear Open-Back vs Behringer Omega Open-Back Hi-Fi, HamiltonBuhl Smart‑Trek Deluxe Over‑Ear vs Yunsailing 30, OneOdio Over Ear Headphone vs TANCHJIM Nora Professional