Name and Surname: Prof. Dr. Abdullah KURT
Place and Date of Birth: Afyonkarahisar in Turkey, March 10, 1975
web (personal; Gazi Uni. Academic Information System): https://avesis.gazi.edu.tr/akurt
YÖK Academic Information System: Prof. Dr. Abdullah KURT (click for link)
ORCID ID: 0000-0002-7650-3443 (click for link)
Web of Science ID: A-4717-2018 (click for link)
Scopus Author ID: 15520714800 (click for link)
Google Scholar: Abdullah KURT (Gazi University) (click for link)
ResearchGate: Abdullah KURT (click for link)
Phd (2001 - 2006): Gazi University, Graduate School of Natural and Applied Sciences, Department of Mechanical Education, Ankara, Turkey
MSc (1997 - 2001): Gazi University, Graduate School of Natural and Applied Sciences, Department of Mechanical Education, Ankara, Turkey
BSc (1993 - 1997): Gazi University, Faculty of Technical Education, Department of Mechanical Education, Ankara, Turkey
Academic Titles
Lecturer (as Professor), December 21, 2020 - … Gazi University, Faculty of Technology, Department of Manufacturing Engineering, Ankara, Turkey.
Lecturer (as Associate Professor), 2011 - December 21, 2020. Gazi University, Faculty of Technology, Department of Manufacturing Engineering, Ankara, Turkey.
Lecturer (as Associate Professor), 2010 - 2011. Gazi University, Faculty of Technical Education, Department of Mechanical Education, Ankara, Turkey.
Lecturer (as Assistant Professor), 2007 - 2010. Gazi University, Faculty of Technical Education, Department of Mechanical Education, Ankara, Turkey.
Research Assistant (as Doctor), 2006 - 2007. Gazi University, Faculty of Technical Education, Department of Mechanical Education, Ankara, Turkey.
Research Assistant, 2000 - 2006. Gazi University, Faculty of Technical Education, Department of Mechanical Education, Ankara, Turkey.
Research Assistant, 1998 - 2000. Afyon Kocatepe University, Faculty of Technical Education, Department of Mechanical Education, Afyon, Turkey.
Administrative Tasks
Vice-Chairperson of Department, July 14, 2011-November 13, 2012, Gazi University, Faculty of Technology, Department of Manufacturing Engineering, Ankara, Turkey.
Vice-Chairperson of Department, April 11, 2011-November 13, 2012, Gazi University, Faculty of Technical Education, Department of Mechanical Education, Ankara, Turkey.
Other Tasks
Executive Committee Member, 3rd National Symposium on Machining (UTIS2012), October 4-5, 2012, Gazi University, Ankara, Turkey.
Executive Committee Member, 3rd International Advanced Technologies Symposium, August 18-20, 2003, Gazi University, Ankara, Turkey.
Associate Editor, Afyon Kocatepe University, Journal of Sciences, Volume: 2, Issue: 1, 2000.
Academic Interests
* Metal cutting * Machinability * Mechanics of metal cutting * Analysis of cutting tool stresses * Finite element method on metal cutting * Simulation of machining * Mathematical modeling of cutting parameters
Other Skills and Interests
* MS Office Programs (Word, Excel, PowerPoint, Publisher) * Computer-aided draw/design (CAD) programs (AutoCAD, Varicad, Mechanical Desktop, Solidworks, CATIA, SpaceClaim) * Analysis/modelling/ simulation programs (ANSYS, Deform, AdvantEdge, Matlab, Mathematica, MDSolids, Working Model) * Web design programs (MS Office FrontPage, MS Expression Web 4, Macromedia Dreamweaver) BELTEK Course (Code: 703), CAD-1 / Computer Aided Drawing / Design-1. * BELTEK is the abbreviation of technical training courses given in 2 or 3-month periods. The courses are coordinated by Ankara Metropolitan Municipality in cooperation with the Gazi University Technology Faculty since from 1999. The objective of this project is to equip the people of the city with knowledge and skills, to ensure urban integration, and to train manpower in accordance with the professional standards required by small and medium enterprises.
Undergraduate Courses (TF: Faculty of Technology & TEF: Faculty of Technical Education)
Statics (TF: ESM-102 / İMM-221 / İMM-251 / MEM-203, TEF: MAK-201)
Dynamics (TF: AEM-301 / ESM-201 / ESM-216 / İMM-220 / İMM-222, TEF: MAK-202)
Mechanics of Materials (TF: ESM-301 / İMM-226)
Strength of Materials (TEF: MAK-204)
Statics and Dynamics (TEF: MAK-209)
Mechanics (TEF: MAK-207)
Mechanisms (TEF: MAK-307)
Post-Graduate Courses (Gazi University, Graduate School of Natural and Applied Sciences)
Applied Finite Element Analysis (Department of Mechanical Education: MAK-644)
Applied Finite Element Analysis (Department of Manufacturing Engineering: 5081340)
MSc Thesis
Design and production of a dynamometer for measurement of cutting forces during metal cutting with linear movement on shape machine, Gazi University, Graduate School of Natural and Applied Sciences, Department of Mechanical Education, January 2001, Ankara, Turkey (Supervisor: Prof. Dr. Ulvi Şeker).
PhD Thesis
Experimentally investigation and mathematical modelling of the cutting forces and mechanical stresses on metal cutting, Gazi University, Graduate School of Natural and Applied Sciences, Department of Mechanical Education, October 2006, Ankara, Turkey (Supervisor: Prof. Dr. Ulvi Şeker).
MSc Thesis
Demir, D., The education of web based interactive mechanics of materials, Gazi University, Graduate School of Natural and Applied Sciences, Department of Mechanical Education, February 2010, Ankara.
Sürücüler, S., Developing a mathematical model for the cutting forces prediction depending on the cutting parameters variation in turning, Gazi University, Graduate School of Natural and Applied Sciences, Department of Mechanical Education, May 2010, Ankara.
Kirik, A., Developing model for surface roughness prediction depending on the cutting parameters variation in turning, Gazi University, Graduate School of Natural and Applied Sciences, Department of Mechanical Education, September 2010, Ankara.
Bakır, S., Investigation of the stresses affect cutting tool on a grooving to the outer surface, Gazi University, Graduate School of Natural and Applied Sciences, Department of Mechanical Education, June 2014, Ankara.
Burkan, S.N., Modelling of the cutting forces with the help of artificial neural networks depending on the cutting parameters variation in turning, Gazi University, Graduate School of Natural and Applied Sciences, Department of Mechanical Education, June 2014, Ankara.
Günaydın, T., Investigation of the effects of time-varying cutting forces on the cutting tool in turning, Gazi University, Graduate School of Natural and Applied Sciences, Department of Mechanical Education, January 2015.
Özcan, B., The strength analysis of short barreled firearms depending on the internal ballistics, Gazi University, Graduate School of Natural and Applied Sciences, Department of Manufacturing Engineering, June 2019.
Demirel, T., Investigation of cutting tool stresses based on cutting parameters in thread tapping, Gazi University, Graduate School of Natural and Applied Sciences, Department of Manufacturing Engineering, December 2019.
Erbektaş, B., V Analysis of springback behavior of sheet metal in V die bending process by finite element method, Gazi University, Graduate School of Natural and Applied Sciences, Department of Manufacturing Engineering, July 2023, Ankara.
Durak, F., Topology optimization of the pulley used in the pulley-belt system, Gazi University, Graduate School of Natural and Applied Sciences, Department of Manufacturing Engineering, January 2024, Ankara.
Gök, O. C., Comparison of the programs used to simulate drilling process, Gazi University, Graduate School of Natural and Applied Sciences, Department of Manufacturing Engineering, July 2024, Ankara.
Balkış Bulut, H., Structural analysis and optimization of aircraft wings operating at low Reynolds numbers using hybrid composite materials, Gazi University, Graduate School of Natural and Applied Sciences, Department of Manufacturing Engineering, (ongoing), Ankara.
Kumaş, B., Investigation of deformations occurring during and after diameter machining of aluminum casting parts, Gazi University, Graduate School of Natural and Applied Sciences, Department of Manufacturing Engineering, (ongoing), Ankara.
Bayır, A.Ç., Mechanical design of barrel boresight alignment system, Gazi University, Graduate School of Natural and Applied Sciences, Department of Manufacturing Engineering, (ongoing), Ankara.
PhD Thesis
Sekmen, M., Simulation and experimental verification of the effects of the rake angle on the cutting forces and mechanical stresses, (First Advisor: Prof. Dr. Ulvi Şeker), Gazi University, Graduate School of Natural and Applied Sciences, Department of Mechanical Education, 2013.
Keskin, B., Investigation of quality and heavy metal problems in paper-based packaging, Gazi University, Graduate School of Natural and Applied Sciences, Department of Manufacturing Engineering, November 2020.
Yıldız, A., Simulation of drilling process and examination of mechanical stresses due to variations in cutting parameters for drilling operations, Gazi University, Graduate School of Natural and Applied Sciences, Department of Mechanical Education, June 2021.
Demirel, T., The effect of the elements forming the drill bit geometry on drilling performance in difficult-to-machine materials, Gazi University, Graduate School of Natural and Applied Sciences, Department of Manufacturing Engineering, (ongoing), Ankara.
Senirget, E., Analysis of the effects of different coating applications on drill performance and hole quality, Gazi University, Graduate School of Natural and Applied Sciences, Department of Manufacturing Engineering, (ongoing), Ankara.
As researcher
Experimental and analytical investigation of cutting forces during metal cutting by using finite element method. Financier: State Planning Organisation (DPT). Project Code: 2002K120250-05, 2004.
Experimentally measurement of cutting forces during metal cutting and investigation of the cutting tool stresses by using finite element method. Financier: Gazi University, Unit of Scientific Research Projects. Project Code: 07/2002-13, 2004.
Experimentally investigation of the effects of the rake angle on the cutting forces in metal cutting. Financier: Gazi University, Unit of Scientific Research Projects. Project Code: 07/2002-14, 2003.
Experimentally determination of the specific cutting resistance of nickel-based super alloy Inconel 718. Financier: Gazi University, Unit of Scientific Research Projects. Project Code: 07/2003-16, 2005.
Investigation of the relationship between microstructure and machinability of AISI 4140 steel. Financier: Gazi University, Unit of Scientific Research Projects. Project Code: 07/2003-27, 2006.
The effects of the chip breaker forms on the cutting tool stresses. Financier: Gazi University, Unit of Scientific Research Projects. Project Code: 07/2005-01, 2006.
Mathematical modelling of the stresses on the cutting tool in drilling. Financier: Gazi University, Unit of Scientific Research Projects. Project Code: 07/2006-12, 2008.
The practical hook-type three points linkage for tractors. Financier: Ministry of Science, Industry and Technology (SANTEZ Project). Project Code: 00737.STZ.2010-2, 2012.
As project manager
Developing a model for surface roughness prediction depending on the cutting parameters variation in turning. Financier: Gazi University, Unit of Scientific Research Projects. Project Code: 07/2009-08, 2011.
Simulation and experimental verification of the effects of the rake angle on the cutting forces and mechanical stresses. Financier: Gazi University, Unit of Scientific Research Projects. Project Code: 07/2010-56, 2013.
Investigation of the stresses affect cutting tool on grooving to the outer surface. Financier: Gazi University, Unit of Scientific Research Projects. Project Code: 07/2012-36, 2014.
Develop and produce the cutting tool for machining of carbon fiber reinforced polymer (CFRP) composites and determination of performance criteria. Financier: Ministry of Science, Industry and Technology (SANTEZ Project). Project Code: 0109.STZ.2013-1, 2015.
Simulation of drilling process and examination of mechanical stresses due to variations in cutting parameters for drilling operations. Financier: Gazi University, Unit of Scientific Research Projects. Project Code: 07/2012-59, 2018.
As advisor
Eliminating of bonding failure on low-alloy steel hoses combined with hot press joining method, and improving product quality and strength. Financier: The Scientific and Technological Research Council of Turkey (TÜBİTAK, 3001 - Starting R&D Projects Funding Program). Project Code: 214M346, 2017.
Papers published in the journals in Web of Science databases (SCI / SCI-Expanded papers)
Şeker, U., Kurt, A., Çiftçi, İ., Design and construction of a dynamometer for measurement of cutting forces during machining with linear motion, Materials and Design, 23 (4), 2002, pp.355–360. https://doi.org/10.1016/S0261-3069(02)00013-4
Şeker, U., Kurt, A., Çiftçi, İ., The effect of feed rate on the cutting forces when machining with linear motion, Journal of Materials Processing Technology, 146 (3), 2004, pp.403-407. https://doi.org/10.1016/j.jmatprotec.2003.12.001
Kurt, A., Şeker, U., The effect of chamfer angle of polycrystalline cubic boron nitride cutting tool on the cutting forces and the tool stresses in finishing hard turning of AISI 52100 steel, Materials and Design, 26 (4), 2005, pp.351–356. https://doi.org/10.1016/j.matdes.2004.06.022
Şeker, U., Kurt, A., The mathematical modelling of the compressive stresses on the cutting tool in machining of Inconel 718, Material Science Forum (Advances in Materials Processing Technologies, the special number), 526, 2006, pp.229–234. https://doi.org/10.4028/www.scientific.net/MSF.526.229
Gürbüz, H., Kurt, A., Korkut, İ., Şeker, U., The experimental investigation of the effects of different chip breaker forms on the cutting forces, Advanced Materials Research (Materials and Technologies, the special number), 23, 2007, pp.191-194. https://doi.org/10.4028/www.scientific.net/AMR.23.191
Köse, E., Kurt, A., Şeker, U., The effects of the feed rate on the cutting tool stresses in machining of Inconel 718, Journal of Materials Processing Technology, 196 (1-3), 2008, pp.165–173. https://doi.org/10.1016/j.jmatprotec.2007.05.019
Kurt, A., Modelling of the cutting tool stresses in machining of Inconel 718 using artificial neural networks, Expert Systems with Applications, 36 (6), 2009, pp.9645-9657. https://doi.org/10.1016/j.eswa.2008.12.054
Kurt, A., Köse, E., Şahinbaşkan, T., The effects of blade angle on blade stresses during cutting of dfferent kinds of paper materials, Strojniški vestnik - Journal of Mechanical Engineering, 55 (10), 2009, pp.633-640. url
Gürbüz, H., Kurt, A., Çiftçi, İ., Şeker, U., The influence of chip breaker geometry on tool stresses in turning, Strojniški vestnik - Journal of Mechanical Engineering, 57 (2), 2011, pp.91-99. http://dx.doi.org/10.5545/sv-jme.2009.191
Kurt, A., Yalçın, B., Yılmaz, N., The cutting tool stresses in finish turning of hardened steel with mixed ceramic tool, The International Journal of Advanced Manufacturing Technology, 80 (1-4), 2015, pp.315-325. https://doi.org/10.1007/s00170-015-6927-3
Akkurt, A., Sagdicoglu Celep, G., Kurt, A., Basak, H., Sahin, I., Yavuzcan, H.G., Automatic halva production band and prototype development, Journal of Food Process Engineering, 41 (6), 2018, e12823. https://doi.org/10.1111/jfpe.12823
Yalçın, B., Yılmaz, N., Kurt, A., Tool stresses in soft and hard finish turning with low content CBN tool by finite elements analysis, ACTA Physica Polonica A, 134 (1), 2018, pp.48-56. https://doi.org/10.12693/APhysPolA.134.48
Yağmur, S., Kurt, A., Şeker, U., Evaluation and mathematical modeling of delamination and cutting forces in milling of carbon fiber reinforced composite (CFRP) materials, Journal of the Faculty of Engineering and Architecture of Gazi University, 35 (1), 2020, pp.457-465. https://doi.org/10.17341/gazimmfd.479616
Kurt, A., Bakir, S., Theoretical analysis and mathematical modeling of deformation and stresses of the grooving tool, Neural Computing and Applications, 32 (14), 2020, 10481-10500. https://doi.org/10.1007/s00521-019-04588-w
Yildiz, A., Kurt, A., Yağmur, S., Finite element simulation of drilling operation and theoretical analysis of drill stresses with the Deform-3D, Simulation Modelling Practice and Theory, 104, November 2020, Article No: 102153. https://doi.org/10.1016/j.simpat.2020.102153.
Demirel, T., Yağmur, S., Kayir, Y., Kurt, A., Finite element simulation of stresses in cutting tools during tapping, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 237 (5), 2023, 1119-1129. https://doi.org/10.1177/09544062221126643
Proceedings presented and published in the international conferences/symposiums
Kurt, A., Şeker, U., Analysis of the factors that effect cutting tool life by using an expert system (in Turkish), 2nd International Advanced Technologies Symposium Proceedings, March 8-10, 1999, Marmara University, İstanbul, Turkey, pp.131-136.
Kurt, A., Şeker, U., Experimental determination of specific cutting resistance (ks) of Inconel 718, International Conference on Industrial Engineering and Systems Management, The International Institute of Innovation, Industrial Engineering and Entrepreneurship, e-Proceedings of IESM’05 Conference, May 16-19, 2005, Marrakech-Morocco, Vol. I, pp.297-305.
Şeker, U., Kurt, A., The mathematical modelling of the cutting tool stresses in machining of Inconel 718, 1st Manufacturing Engineering Society International Conference (CIIF-MESIC), September 19-21, 2005 Calatayud, Spain, Abstract Books, pp.46.
Gürbüz, H., Kurt, A., Korkut, İ., Şeker, U., The experimental investigation of the effects of different chip breaker forms on the cutting forces, 4th International Conference on Materials and Manufacturing Technologies (MATEHN’06), Ministry of Education and Research, Technical University of Cluj-Napoca, September 21-23, 2006, Cluj-Napoca, Romania, Book of Abstracts, pp.143.
Korucu , S. Günay, M., Kurt, A., Şeker, U., Mathematical modelling of stress on the cutting tool in drilling by indexable insert drills, 5th International Advanced Technologies Symposium Proceedings, Karabük University, May 13-15, 2009, Karabük, Turkey, e-Proceedings of IATS’09 Symposium, Paper ID: 1584 (7 pages).
Demir, D., Kurt, A., A different approach to mechanics of materials education with web based interactive methods, 10th International Educational Technology Conference (IETC 2010), 26-28, April 2010, Bogazici University, İstanbul, Turkey, Proceedings Book, (Volume III), pp.1776-1779.
Sekmen, M., Kurt, A., Şeker, U., Effect of Cutting Tool Radius on Cutting Forces and Temperature in Machining of AISI 1050 Steel, 1st International Conference on Engineering Technology and Applied Sciences, 21-22 April 2016, Afyon Kocatepe University, Afyon, Turkey, Book of Proceedings, pp.572-578.
Yağmur, S., Çavuş, Y., Kurt, A., Ulaş, H. B., Şeker, U., Investigation of machining carbon fiber reinforced composite materials with solid cementite carbide tools, 9th International Symposium KOD 2016 Machine and Industrial Design in Mechanical Engineering, 9-12 June 2016, Balatonfüred, Hungary, Proceedings Book, pp.229-234.
Yalçın, B., Yılmaz, N., Kurt, A., Tool stresses in finish soft and hard turning with low content CBN tool by finite element analyses, 7th International Advances in Applied Physics and Materials Science Congress & Exhibition (APMAS 2017), April 22-26, 2017, Mugla, Turkey, Abstracts Book, pp.39.
Özcan, B., Kurt, A., Şeker, U., Seyis, M., The strength analysis of gun barrel depending on the interior ballistics by finite element method, 3rd International Symposium on Industrial Design & Engineering (ISIDE2018), November 22- 24, 2018, Antalya, Turkey, Full Text Book, pp.107-114.
Demirel, T., Kayır, Y., Kurt, A., Inspection of cutting tool stresses based on cutting parameters in tapping cutting tools, 1st International Science and Innovation Congress (INSI 2019), August 26-29, 2019, Denizli, Turkey, Abstract Book, pp.45.
Keskin, B., Altay, B.N., Kurt, A., Fleming, P.D., Sustainability and paper based packaging, International Symposium on Business & Economics (IsBE 2020), June 4-5, 2020, Ankara, Turkey, Proceeding Book, 115.
Erbektaş, B., Kurt, A., Springback analysis of AISI 304 sheet metal in V-bending process using finite element method, 4th International Istanbul Current Scientific Research Congress, May 1-2, 2023, Istanbul, Türkiye, Proceeding Book, 25.
Durak, F., Kurt, A., Topology optimization of the pulley used in the belt pulley system, 3rd International Trakya Scientific Research Congress (ISARC), November 25-26, 2023, Edirne, Türkiye, Proceeding Book, 224-225.
Gök, O.C., Kurt, A., Comparison of the programs used to simulate drilling process, 12th International Congress on Engineering, Architecture and Design, December 23-25, 2023, Istanbul, Türkiye, Proceeding Book, 1105-1109.
Demirel, T., Aydın, K., Uğur, L., Kurt, A., Numerical analysis of the effect of the elements forming the drill bit geometry on the drilling of Inconel 718, 12th UTIS International Congress on Machining, November 1-3, 2024, Antalya, Türkiye, Proceeding Book, 241.
National/International papers published in non-SCI/non-SCI-Expanded journals
Taşgetiren, S., Aslantaş, K., , Kurt, A., Stresses on parting tool during turning: Effect of frictional forces (in Turkish), Journal of Zonguldak Karaelmas Universtiy Karabük Technical Education Faculty, 3 (2–3), 2000, pp.1–10.
Kurt, A., Şeker, U., The effect of the depth of cut on the cutting tool stresses (in Turkish), Electronic Journal of Machine Technologies, 1, 2004, pp.23-29.
Kurt, A., Şeker, U., The effect of cutting tool chamfer angle on the cutting forces and the tool stresses (in Turkish), Journal of Polytechnic,7 (4), 2004, pp.291-296.
Kurt, A., Şeker, U., Investigation of the cutting tool stresses using finite element method (in Turkish), Journal of the Faculty of Engineering and Architecture of Gazi University, 20 (4), 2005, pp. 491-497.
Kurt, A., Sürücüler, S., Kirik, A., Developing a mathematical model for the cutting forces prediction (in Turkish), Journal of Polytechnic, 13 (1), 2010, pp.15-20.
Kurt, A., Sürücüler, S., Kirik, A., Developing a mathematical model for the cutting forces prediction depending on the cutting parameters, Technology (Karabuk University), 13 (1) 2010, pp.23-30.
Gürbüz, H., Kurt, A., Şeker, U., Investigation of the effects of different chip breaker forms on the cutting forces using artificial neural networks, Gazi University Journal of Science, 25 (3), 2012, pp.803-814.
Akkurt, A., Kurt, A., Özdemir, A., Şeker, U., Comparison of hole surface finishing processes with roller burnishing method applied in copper materials, Gazi University Journal of Science, 27(1), 2014, pp.721-734.
Kurt, A., Bakır, S., Effect of grooving insert width on cutting forces in the grooving operation (in Turkish), Gazi University Journal of Science Part: C, Design and Technology, 2 (2), 2014, pp.221-228.
Yağmur, S., Kurt, A., Şeker, U., The evaluation and mathematical modelling of surface roughness in milling of carbon fiber reinforced composite materials (in Turkish), Gazi University Journal of Science Part: C, Design and Technology, 6 (3), 2018, pp.705-714. https://doi.org/10.29109/gujsc.411033
Keskin, B., Altay, B.N., Kurt, A., Fleming, P.D., Sustainability in paper based packaging, Gazi Journal of Engineering Sciences, 6 (2), 2020, 129-137. https://dx.doi.org/10.30855/gmbd.2020.02.05
Sekmen, M., Kurt, A., Şeker, U., The effect of friction coefficient on cutting forces, temperature and cutting tool stresses in machining process, Journal of the Institute of Science and Technology , 13 (2) , 2023, 1176-1188. https://dergipark.org.tr/tr/pub/jist/issue/77307/1208621
Demirel T, Yağmur S, Kayır Y, Kurt A., Investigation of thrust force, torque and chip formation in tapping threading by finite element method, Journal of Polytechnic, 27(4), 2024, 1633-1641. https://doi.org/10.2339/politeknik.1342932
Özcan, B., Seyis, M. S., Şeker, U., Kurt, A., Analysis of the internal ballistic process of a 9x19 mm pistol barrel using the finite element method and experimental validation, Enginoscope, 1(2), 2025, 116-135. https://dergipark.org.tr/tr/download/article-file/4963780
Proceedings presented and published in the national conferences/symposiums
Kurt, A., Şeker, U., Analyzing cutting tool life by computer (in Turkish), Bilim Günleri Sempozyumu, Proceedings Book, TMMOB Makine Mühendisleri Odası Denizli Şubesi, 5–7 Mayıs 1999, Denizli, Turkey, pp.534–543.
Kurt, A., Şeker, U., Aslan, E., The effect of feed rate on the cutting forces in the machining with linear motion (in Turkish), Makine Tasarım ve İmalat Kongresi, Proceedings Book, TMMOB Makine Mühendisleri Odası Konya Şubesi, 2–3 Kasım 2001, Konya, Turkey, pp.107–117.
Kurt, A., Şeker, U., Çiftçi, İ., Design and production of a dynamometer for measurement of cutting forces during metal cutting with linear motion (in Turkish), II. Makine Malzemesi ve İmalat Teknolojisi Sempozyumu, Proceedings Book, Celal Bayar Üniversitesi, 7–9 Kasım 2001, Manisa, Turkey, pp.656–667.
Sekmen, M., Kurt, A., Şeker, U., Effect of chıp breaker form and chip breaker angle on cutting forces and stresses (in Turkish), 4. Ulusal Talaşlı İmalat Sempozyumu (UTIS 2013), Proceedings Book, Ege Üniversitesi Mühendislik Fakültesi Makine Mühendisliği Bölümü, 07-09 Kasım 2013, Kuşadası, Aydın, Turkey, pp.441-456.
Citations in Web of Science databases
Please click here for the citations from the Web of Science databases dated 03.10.2022.
Citations in Scopus databases
Please click here for the citations from the Scopus databases dated 03.10.2022.
Citations in Google Scholar databases
Please click here for the citations from the Google Scholar databases dated 03.10.2022.