Wood Framed Construction

Light wood framed construction is one of the most popular types of building methods for homes in the United States and parts of Europe.

It has the following characteristics:

1. It is light, and allows quick construction with no heavy tools or equipment. Every component can easily be carried by hand - a house essentially becomes a large carpentry job. The main tool is a handheld nail gun.

2. It is able to adapt itself to any geometric shape, and can be clad with a variety of materials.

3. There are a huge variety of products and systems tailored to this type of construction.

It has these negative characteristics:

1. It is not highly fireproof, as it is made of wood.

2. It is not strong enough to resist major wind events such as tornadoes and hurricanes.

Every timber frame home structure is made of a few basic components:

Studs are vertical wooden members within the walls.

Joists are the horizontal wooden beams that support the floors.

Rafters are the sloping wooden beams that support the roof.

Sheathing are the sheets that are nailed over the studs to connect them securely and form the wall surfaces.

Siding is the exterior cladding that covers the walls from the outside.

Let us examine the major types of light wood framed structures.

BALLOON FRAME STRUCTURES

While this is an outmoded form of wood construction no longer used today, it is good to know what it is and why it is no longer used.

In balloon frame construction, if you had a two-storey house that was twenty feet high, you would use a single 20 foot long vertical stud for both storeys. This made the studs heavy and difficult to handle. The second problem was the gap between the two studs, which acted passageways for the spread of fire from the lower to the upper storey.

For these reasons, balloon frame construction has been superseded by platform frame construction, which is superior in all respects.

PLATFORM FRAME STRUCTURES

This is the sequence you would follow to erect a 2-storey platform frame house.

1. Erect the ground floor platform, a horizontal wooden platform over the foundation.

2. Build all the walls upto a height of one storey. This can easily be done by building each wall flat - on the floor platform - and then tilting it vertically.

3. Build the next floor platform.

4. Erect the next set of vertical walls in the same manner on the top of the second platform.

5. Build the sloping roof over the walls.