Projects

Construction of university building at Batu-Pahat, Johor Bahru, Malaysia (2019)

A four-storey government building project (worth RM 15 million) which will be used for University Educational purposes. As an assistant of site engineer, it has responsibility to check the construction is going on under specified design and conduct audit structural program to make sure safety of building.

Improper welding

Identifying Honeycomb

Check Rebar spacing(100mm) before casting

Construction site

Location identification of improper welding

Dismantle formwork identified

Inspecting onsite casting

Slump test (the slump was 70mm)

Rainfall harvesting in University Teknologi Malaysia, Johor Bahru campus (2018)

The project was delivered on group of 4 undergraduate engineering student and I lead the project. As an activity of leader, Its very important to figure out the project properly so that it can be finished before deadline with fulfilling all required criteria. In this project, we calculated rainfall intensity from IDF curve , calculate the peak flow in the existing drainage system and finally propose suitable tank dimension with location.

Location map

Before and after installation of pipe

Proposed location of water tank

Page updated

Google Sites

Report abuse

Projects

Construction of university building at Batu-Pahat, Johor Bahru, Malaysia (2019)

Rainfall harvesting in University Teknologi Malaysia, Johor Bahru campus (2018)