It doesn't have to be difficult to set up a new HP printer. 123.hp.com install offers the official way to download the necessary software and connect your HP printer to a Wi-Fi network, regardless of whether you've bought a new printer or need to reconnect an old one.
Remove all packaging materials and protective tape.
Install:
Ink cartridges
Paper into the input tray
Turn on the printer and wait until it finishes startup.
If this is the first installation, many HP printers automatically enter setup mode.
If not:
Press and hold the Wireless button until the wireless light starts blinking.
On touchscreen models, open:
Settings → Network Setup → Restore Network Settings
This allows the printer to search for a new wireless network.
Open your preferred web browser.
Go to the 123.hp.com install page.
Enter your printer model number.
Download:
HP Smart
Printer drivers
Recommended software
Install the downloaded application.
Launch HP Smart after installation.
Select:
Add Printer
The software searches for nearby HP printers.
Choose your printer from the list.
HP Smart will display available wireless networks.
Choose your home Wi-Fi.
Enter the Wi-Fi password.
Select Connect.
The printer will connect to the network.
Once connected:
Wireless light becomes solid
Printer appears online in HP Smart
HP Smart might automatically:
Set up printer drivers
Set up the printer
Create a test page
Look for firmware upgrades
Follow the on-screen directions.
Wireless printing is now possible with your printer.
To make sure everything is operating as it should:
Launch the HP Smart
Verify the status of the printer
Create a test document.
Make sure "Ready" is displayed on the printer.
Using HP Smart that I obtained from the official installation page, I found the setup procedure to be simple. In a matter of minutes, the software identified the printer, helped me establish a Wi-Fi connection, and installed the required drivers on its own. My initial attempt at entering the incorrect Wi-Fi password was the only problem I ran into. The printer successfully connected and was prepared to print after the error was fixed. A steady connection was also maintained by keeping the printer close to the router during setup.
One of the simplest ways to finish your printer setup is to connect an HP printer to Wi-Fi utilizing the 123.hp.com install. By assisting you with wireless settings, driver installation, and printer identification, the official HP Smart app streamlines the procedure.
You should be able to connect your HP printer and begin printing wirelessly in a matter of minutes if you follow the above instructions.
1. What does 123.hp.com install?
Users can obtain printer drivers, the HP Smart app, and installation-related software from this official HP printer setup page.
2. Does connecting my printer to Wi-Fi require an HP Smart?
HP Smart offers the simplest wireless setup and printer management solution for the majority of contemporary HP printers.
3. Why is my HP printer unable to establish a Wi-Fi connection?
Incorrect Wi-Fi passwords, poor wireless connections, out-of-date firmware, and printers not in setup mode are common culprits.
4. Do I need a USB cable to connect my HP printer?
Indeed. The majority of HP wireless printers on the market today allow direct Wi-Fi setup without the need for a USB connection.
5. How much time does it take to set up an HP printer?
The entire setup procedure typically takes ten to twenty minutes.
6. After setting up, can I print from my smartphone?
Indeed. Your HP printer can print from compatible Android and iPhone devices using HP Smart once it's connected to Wi-Fi.