How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
If you want active noise cancellation, wireless freedom and a built-in mic array for talking to camera, choose 1 Hora Active Noise Cancelling; if you need a cheap, no-battery backup pair you can plug straight into a 3.5 mm jack, choose CLIPSUN Earbuds 2. For vlogging specifically, these two solve completely different problems — one is a wireless headset you can wear while filming and monitoring, the other is a wired pair that never needs charging and doubles as a spare.
• 1 Hora Active Noise Cancelling — biggest strength: true active noise cancellation plus four microphones with AI-assisted noise filtering, so your voice stays intelligible even in windy or busy places.
• 1 Hora Active Noise Cancelling — biggest trade-off: it's a battery product. Up to 5 hours per charge, 24 hours total with the case, and it needs a Bluetooth 5.4 device within roughly 10 meters.
• CLIPSUN Earbuds 2 — biggest strength: it never runs out of power and never pairs. Plug the 3.5 mm jack in and it works, with a two-pack so you always have a backup.
• CLIPSUN Earbuds 2 — biggest trade-off: it's wired, it isolates noise passively rather than cancelling it, and it only fits devices that still have a headphone jack.
• Who each pick is for: the 1 Hora set suits the vlogger who wants a wireless headset for vlogging with real noise control; the CLIPSUN pair suits anyone who wants a dead-simple spare, a wired monitoring option, or a second pair for a guest.
The 1 Hora Active Noise Cancelling is an in-ear true wireless bud with a charging case, and its headline feature is exactly what the name says: active noise cancellation. That's a different animal from the passive isolation you get from a sealed tip. ANC actively fights ambient noise, which matters when you're shooting outdoors, in a café, on a train, or anywhere the background hum would otherwise leak into your ears while you're trying to concentrate on a take.
The microphone setup is the part I'd point a vlogger toward. Four microphones with AI-powered noise cancellation are there to separate your voice from chatter and wind. If you've ever recorded a piece to camera with cheap buds and heard the street behind you louder than your own voice, you know why that matters. The spec sheet also confirms ANC works during calls, with the dual ENC microphones reducing ambient noise so your voice carries in windy or noisy environments. Pair that with Bluetooth 5.4, 10-meter range and one-step auto-connect when you open the case, and you have a headset for vlogging that gets out of your way.
Buy it if you want wireless, ANC, a four-mic array for calls and on-camera audio, and a battery readout you can trust. Skip it if you hate charging things, or if your camera rig and phone are the only devices you own and you'd rather not manage Bluetooth pairing on set.
CLIPSUN Earbuds 2: Who It's For
The CLIPSUN Earbuds 2 is the opposite philosophy, and I mean that as a compliment. This is a two-pack of wired in-ear buds with a 3.5 mm jack, an inline HD microphone, and push-button volume and playback control. No pairing. No charging. No app. You pull them out of your pocket, plug them in, and they work — on an iPad, a laptop, an MP3 player, an Android phone, or anything else with a standard headphone jack.
For a vlogger, the case for this pair is narrower but real. First, it's a backup. If your wireless buds die mid-shoot, a wired pair in the bag keeps you recording. Second, out of the two-pack you effectively get a spare for a second person or a second device — useful if you're doing a two-person setup and want both people monitoring off the same source. Third, if you're working with older gear that still has a 3.5 mm output, this is the simplest possible connection.
What it doesn't do is cancel noise. The listing is clear that noise control here is sound isolation — the in-ear seal blocking some ambient sound, not electronics fighting it. There's no battery, no Bluetooth, no ANC. The cable is TPE with an oxygen-free copper core, chosen for conductivity and lower signal distortion, and it's built with a tangle-free design so it survives being stuffed in a pocket. The 32-ohm impedance and 20 kHz frequency response are standard-fare specs, and the enclosure is off-white TPE. A 12-month warranty covers it.
Buy it if you want a zero-fuss wired pair, a cheap second set, or a reliable backup that can't run flat. Skip it if your phone has no headphone jack, if you need active noise cancellation, or if you want to move around untethered while you film.
Side-by-Side: Which Should You Choose?
• Best for clear voice pickup on calls and to camera → 1 Hora Active Noise Cancelling. Four mics with AI noise filtering and dual ENC during calls, versus a single inline HD mic.
• Best for battery life → 1 Hora Active Noise Cancelling. Up to 5 hours per charge, 24 hours with the case, 48 days standby. The CLIPSUN set has no battery at all, which some people will read as the ultimate battery life.
• Best for zero-setup reliability → CLIPSUN Earbuds 2. No pairing, no charging, no Bluetooth range limit — just a 3.5 mm plug.
• Best for a spare or second pair → CLIPSUN Earbuds 2. It ships as a two-pack; the 1 Hora set is a single pair with a case.
• Best for wireless monitoring while you move → 1 Hora Active Noise Cancelling. Bluetooth 5.4 with roughly 10 meters of range and auto-connect when you open the case.
• Best for older devices and laptops with a headphone jack → CLIPSUN Earbuds 2. It's built specifically for 3.5 mm jacks; the 1 Hora set has no jack and needs Bluetooth.
• Best for long listening or workout sessions → 1 Hora Active Noise Cancelling. Soft silicone tips, lightweight ergonomic shape and stated sweat resistance for running and gym use.
In my opinion, the 1 Hora Active Noise Cancelling is the one I'd buy for vlogging. ANC, a four-mic array, Bluetooth 5.4, an LED battery readout and 24 hours of total playtime cover the things that actually break a shooting day — noise, voice clarity and power anxiety. The CLIPSUN Earbuds 2 is a genuinely useful second purchase, not a replacement: keep it as your wired backup and your no-charging fallback. If you only ever plug into a laptop or an older phone and never want to think about batteries, flip that recommendation and take the CLIPSUN pair instead. Check the current price on Amazon before you commit — value is personal, and the specs only tell half the story.
If you need ANC, wireless range and a multi-mic setup for calls or on-camera voice, yes — those are features the CLIPSUN pair simply doesn't have. If you only want basic listening, the wired set covers that for less complexity.
No. Their noise control is sound isolation, meaning the in-ear seal blocks some ambient sound. There's no active noise cancellation, and no battery to power it.
Yes. They're wireless Bluetooth 5.4 buds, compatible with iPhone models running iOS 12 or above as well as Android phones, tablets and laptops. Just enable Bluetooth and they auto-connect when you open the case.
The CLIPSUN Earbuds 2, in my opinion. A two-pack of wired buds can't run out of charge and needs no pairing, so it's the safer emergency option when your wireless set is flat or acting up.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: Motast Earbuds vs XIAOWTEK Earbuds: HIFI Stereo Earbuds, Dioche Noise Cancelling Headphones vs Generic Speak Translation Earbud, ELECDER i37 vs MUSICOZY 5.4: Headphones for Travel, Faifxo Gaming Earbuds in-Ear vs Jacuate Gaming Earbuds