SUPERVISION

DOCTOR OF PHILOSOPHY

Main Supervisor

1. 1. Zhang Jie (Oct 2022 - Current) - High corrosion resistant of nickel based alloys

   2. Layla Haythoor Kharboot Al-Aayedi (Oct. 2020 – Current)- Ni-based Nanoparticles Catalysts Materials for Fuel Cell Application

Co-supervisor

1. 3. Mudassar Hussain (Oct 2022-current) - High Entrophy Aluminium Based Alloys

   4. Norba'ayah Binti Ahmad Reza (Sept 2019 – Current) - Corrosion Behaviour and the Development of Green Corrosion Inhibitors of Mild Steel in Acidic Environment.

   5. Nur Suhaili Binti Ismail (Sept 2018 – Current) – Spray Coating of Low Carbon Steel Wire.

   6. Mohammad Amirul Affiz Bin Afripin (May 2014 – 2020) - The Development of Damage Mechanics-Based Model for Reliability Assessment of Through Silicon Via (TSV) Interconnects

   7. Sharifah Nur Ai Shikin Bt Syed Noh (Aug 2013 – Current) - Damage-Based Model for Electromigration (EM)-induced Failure in Through-Silicon Via (TSV) Interconnects

   8. Siti Faizah Binti Mad Asasaari (Feb 2012 - 2021) - Temperature- and strain rate-dependent parameters damage-based models for solder joint reliability  

   9. Chong Chin Yee (Sept 2012 - 2021) – Electrophoretic Deposition Mg)/HA composition on AZ31 Magnesium Alloy for Biomedical Application.

   10. Marina Bt Lias (Sept 2010 - 2019) - Deformation and Microstructural Evolution of Lead Free Solder

MASTER OF PHILOSOPHY 

Main Supervisor

1. Sarah Nadiah Binti Nordin (Oct 2022-current) - Mechanical Properties and Thermal Degradation Study of PVC/nanoclays Composite Sheath for Steel Wire Rope.

2. Nur Alyani Nazirah Binti Mohammad Rafix (Mar 2021-Current) - Effect of Residual Stress on Annealed Cold Drawn Steel Wires.

3. Siti Nor Atikah Mohamad (Oct 2019 – current) – Synthesis and Characterization of Ordered Structure of Transition Metal-based Nanoparticles and its Catalytic Activity on Direct-Borohydride Fuel Cells (DBFC).

4. Nurfatin Liyana Mohamad Amin (Sept 2017 – 2020) – Nickel Underlayer for Electroless Copper deposition on Silicon Wafer for Through Silicon Via (TSV) Application.

5. Shazatul Akmaliah Binti Mior Shahidin (Sept 2015 – 2019) - Deposition of Copper on Silicon Wafer for Through Silicon Via (TSV) Application.

6. Siti Zahira Yusof  (Sept 2012 – 2014) – Effect of Environmental Conditions on Tin Whiskers Formation and Mitigation Method in Lead-Free Soldering.

Co-supervisor

7. Siti Mazarina Qarirah Binti Mohd Ramli (Mar 2021-current) - Structural and Mechanical Properties if Mechanical Alloyed Ti6Al4.  

8. Nur Aisyah Binti Jamaludin (Feb 2016-2020) - LaFeO3 as the catalyst to treat oily wastewater.

MASTER PROJECT (Main Supervisor)

1. Shuhada Shelly (2019/2020) – Effect of Annealing Process on the Mechanical and Corrosion Properties of Cold-drawn High Carbon Steel Wire.

2. Mohamad Yuszaimie bin Abdul Hamid (2021/2022) – The Solar PV Efficiency Analysis for School of Mechanical Engineering using Helioscope and Homer Simulation Software.

UNDERGRADUATE PROJECT (Graduated)

1. Hazwani Binti Hahsim (Co-Supervisor, 2013) -  The Effect of Organic Solvent  (Ethanol) on Electroless Ni-P Deposition

2. Ahmad Afiq Bin Rosdi (Main Supervisor, 2014) - Effect of pH on Electroless Nickel Plating on Silicon Wafer with Through-hole.

3. Nor Faezah Binti Mohd Nor (Main Supervisor, 2014)  - Corrosion Resistance of Hydrochloric Acid Treated 316 L Stainless Steel for Biomedical Application

4. Nur Ruwaida Binti Mohd Razali (Main Supervisor, 2014) - Corrosion Resistance of Sulfuric Acid Treated 316 L Stainless Steel for Biomedical Application

5. Muhammad Fahmee Bin Samsudin @ Mustapha (Main Supervisor, 2014) - Effect of Organic Solvent on Electroless Ni Deposition on Cu Substrate

6. Nurul Amirah Binti Mohd Baharuddin (Main Supervisor, 2015) - Effect of Plating Composition on Electroless Nickel Plating on Silicon Wafer with Through-hole.

7. Mohamad Nawawi Bin Ab Kahar (Main Supervisor, 2015) - Effect of External Stresses on Sn Whiskers Growth on Immersion Sn Surface Finish

8. Mohd Hamka Bin Rahiman (Main Supervisor, 2015) - Effect of Reflow on Sn Whiskers Growth on Immersion Sn Surface Finish

9. Radin Mohammad Zulfadli Bin Mohd Idrus (Main Supervisor, 2016) - Effect of Reflow Process on Solder Sac 405 Deposited on Bare Copper Substrate

10. Mohamad Taufiq Bin Hasnan (Main Supervisor, 2016) - Effect of Reducing Agent on Electroless Deposition of Copper on Silicon Wafer

11. Muhamad Khairudin b Rahim, Deposition of Cu on Through Silicon Via (TSV) using Electroless Process  :: sesisem 20172018 1

12. Nur Nasihah Anis bt Azli, The effect of planting parameters on electroless deposition nickel-phosphorus solar absorber coating on carbonsteel :: sesisem 20172018 1 :: 

13. Muhd An nur b Anuar, Deposition of Cu on Through Silicon Via (TSV) using Electroless Process :: sesisem 20172018 1

14. Muhammad Hafizi  b Dzaid, The  effect  of polarization during corrosion monitoring of ICCP  system  using DCVG  survey::  sesisem  20182019 1 ::  

15. Mohamad Shukri  b Jamaluddin, Effect  of soil  resistivity on the  corrosion rate  of underground pipeline  :: sesisem  20182019 1::  

16. Wesley  Sudiah,  Electroless  Deposition of Black Nickel-Phosphorus  Solar Absorber Coatings  On Carbon Steel::  sesisem  20182019 1 :: 

17. Ika  Irdina  bt  Izham, Multiple  underlayer deposited between Si  wafer and Cu interconnection filler for TSV application ::  sesisem  20182019 1 :: 

18. Nazila  Najwa  bt  Iskak, Electroless  deposition of metallic  underlayer between So wafer and Cu interconnection filler for TSV  application::  sesisem  20182019 

19. Abang Akmal  Azriq Izzat  b Abg Marzuki, Electroless  deposition of ni-p underlayer for TSV  application ::  sesisem  20182019:: 

20. Mohamad Azizi  b Shadan, Sea water as  new  renewable  energy resource  :  material  design for electrodes:: sesisem  20182019 ::  

21. Abdullah Azzam  b Muhammad,   Electroless  Deposition of Black Nickel-Phosphorus  Solar Absorber Coatings  On Carbon Steel::  sesisem  20182019 ::  

22. Saidatul Norlaila Afiza bt Zaidi :: Effect of Annealing Process  on the Residual Stress of Cold Drawn High Carbon Steel Wire::  20192020 ::   

23. Muhamad Amirul bin Izha ::  Simulation of Welding Speed Effect on the Residual Stress, Mechanical Properties, and Corrosion Performance on Carbon Steel Metal Sheet using ANSYS ::  20192020 :: 

24. Siti Mazarina Qarirah binti Mohd Ramli :: Simulation of ICCP design for Submerged Pipelines – Effect of Coating Defect Size in Different Water Environment  ::  20192020 :: 

25. Mohamad Yuszaimie bin Abdul Hamid  :: Optimization of Anode Design of ICCP Application on Submerged Oil Platform: Simulation by COMSOL ::  20192020 ::  

26. Izzati Erlena Bt Abdul Rahman :: Simulation of ICCP design for Underground Pipelines – Effect of Coating Defect Size in Different Soil Media::  20192020 ::