MAKeF 2023
Chan Kar Fei - Publication Award - Nov 2023
MAKeF 2023
Masyurah binti Jaafar, Naa'irah binti Abd Ga'far, Maryam Jameelah binti Ahmad Soffi - Quantum Leap Award - Nov 2023
3 Minutes Tribo Talk (3MT) Competition
Mohammad Izzat Muktar - 1st Runner Up 🥈- August 2023
The International Materials Technology Challenges (iMTC8.0)
GECR Laboratory - 2 Gold 🥇, 1 Silver🥈, 2 Bronze🥉 - June 2023
National Olympiad Nanoteknologi Malaysia (ONM)
Chan Kar Fei - Gold Medal Award 🥇- Oct 2022
Undergraduate Thesis Competition (Solid State Science and Technology)
Aflah Aziz - Best Undergraduate Thesis Award 🥇 - 07 September 2022
Three Minute Thesis (3MT) University Level 2022
Chan Kar Fei - Top 12 Finalist - April 2022
Virtual Technology Challenges 4.0 (v-MTC)
Nuzul Fatihin Izatil Azman - Bronze Medal Award 🥉 - Sep 2020
Chan Kar Fei - Gold Medal Award 🥇 - Sep 2020
Sakura Science Exchange Program
Nuzul Fatihin Izatil Azman - Certification of Achievement - Jan 2020
Chan Kar Fei - Certification of Achievement - Jan 2020
Mohammad Adib Hazan - Certification of Achievement - Jan 2020
28th Scientific Conference of Microscopy Society Malaysia
Nuzul Fatihin Izatil Azman - Best Poster Presenter Award 🥇- Dec 2019
7th International Symposium on Applied Engineering and Sciences (SAES2019)
Chan Kar Fei - Best Poster Award 🥇 - Nov 2019
International Fundamental Science Congress 2018 (iFSC2018)
Dr Yazid Yaakob - Best Poster Award 🥇- Oct 2018
6th International Conference on Solid State Science and Technology (ICSSST 2017)
Nuzul Fatihin Izatil Azman - Best Presenter Award 🥇 - Nov 2017
Ismazatul Husna - Best Presented Award 🥇 - Nov 2017
K.F. Chan, M.H. Mohd Zaid, M.S. Mamat, M. Tanemura, H. Miyazaki, S. Liza, T. Maruyama, K. Sako, K.P. Sharma, N.H. Osman, N.N. Mazu, Y. Yaakob, Simultaneously improved surface hardness and thermal diffusivity of carbon nanotube/zinc silicate composites via colloidal processing, Mater. Chem. Phys. 309 (2023) 128357. https://doi.org/10.1016/j.matchemphys.2023.128357.
K.F. Chan, M.H.M. Zaid, M.S. Mamat, M. Tanemura, S. Liza, H. Miyazaki, T. Maruyama, K. Sako, K.P. Sharma, N.H. Osman, N.K. Sa’at, H.I. Mazlan, Y. Yaakob, Experimental investigation on thermal properties of carbon nanotubes/zinc silicate composites prepared by powder processing, Diam. Relat. Mater. 134 (2023) 109772. https://doi.org/10.1016/j.diamond.2023.109772.
Y. Yaakob, W.M. Lin, M.S. Rosmi, M.Z.M. Yusop, S. Sharma, K.F. Chan, T. Asaka, M. Tanemura, Study of structural and electrical behavior of silicon-carbon nanocomposites via in situ transmission electron microscopy, Mater. Today Commun. 32 (2022) 104081. https://doi.org/10.1016/j.mtcomm.2022.104081.
K.F. Chan, A.K. Ranade, P. Desai, M.A. Hazan, N.F.I. Azman, S. Shaharifin, G. Kalita, M.S. Mamat, M. Tanemura, Y. Yaakob, Upcycling the barbeque grease into carbon nanomaterials, Carbon Trends. 6 (2022) 100143. https://doi.org/10.1016/j.cartre.2021.100143.
K.F. Chan, N.A.M. Maznam, M.A. Hazan, R.N.A. Ahmad, A.S. Sa’ari, N.F.I. Azman, M.S. Mamat, M.A.A. Rahman, M. Tanemura, Y. Yaakob, Multi-walled carbon nanotubes growth by chemical vapour deposition: Effect of precursor flowing path and catalyst size, Carbon Trends. 6 (2022) 100142. https://doi.org/10.1016/j.cartre.2021.100142.
K.F. Chan, M.N. Md Daud, M.Z. Mohd Yusop, M.H. Mohd Zaid, M.S. Mamat, Y. Yaakob, Temperature-dependent thermal properties of zinc silicate-carbon nanotubes composites, in: 12th Int. Fundam. Sci. Congr. 2021 “Engaging Fundam. Sci. New Norm,” Department of Physics, Faculty of Science, Universiti Putra Malaysia, Malaysia, 2022: pp. 153–157.
M.A. Hazan, K.F. Chan, K.A. Jofri, M.S. Mamat, N.A. Endot, S. Liza, I. Ismail, M.Z. Hussein, M. Tanemura, Y. Yaakob, Waste NR Latex Based-Precursors as Carbon Source for CNTs Eco-Fabrications, Polymers (Basel). 13 (2021) 3409. https://doi.org/10.3390/polym13193409.
N.F.I. Azman, S.A. Zuhairi, C.T. Ratnam, Y. Yaakob, M.S. Mamat, Incorporation of Multiwalled Carbon Nanotubes and Graphene Nanoplatelets on the Morphology and Properties of Polyethylene Terephthalate Nanocomposites, J. Nanomater. 2021 (2021) 1–9. https://doi.org/10.1155/2021/6633604.
K.F. Chan, M.H.M. Zaid, M.S. Mamat, S. Liza, M. Tanemura, Y. Yaakob, Recent Developments in Carbon Nanotubes-Reinforced Ceramic Matrix Composites: A Review on Dispersion and Densification Techniques, Crystals. 11 (2021) 457. https://doi.org/10.3390/cryst11050457.
K.F. Chan, M.H. Mohd Zaid, S. Liza, M.S. Mamat, K.A. Matori, N.A. Endot, M. Tanemura, Y. Yaakob, Tuning the optical bandgap of multi-walled carbon nanotube-modified zinc silicate glass-ceramic composites, Ceram. Int. (2021) 103307. https://doi.org/10.1016/j.ceramint.2021.04.017.
M.A. Hazan, S. Mohamad, M.A. Hamid, S. Liza, M.S. Mamat, K.F. Chan, Y. Yaakob, Effect of Reaction Temperature on the Growth of Carbon Nanotubes from Waste Natural Rubber Glove, Pertanika J. Sci. Technol. 28 (2020). https://doi.org/10.47836/pjst.28.s2.17.
M.S. Mamat, G.S. Walker, D.M. Grant, Y. Yaakob, N.A. Shaharun, Effect of the reaction temperature and ethene/hydrogen composition on the nanostructured carbon produced by CVD using supported NiFe2O4 as a catalyst, Results Phys. 19 (2020) 103497. https://doi.org/10.1016/j.rinp.2020.103497.
K.F. Chan, M.H. Mohd Zaid, S. Liza, K.A. Matori, M.S. Mamat, M.A. Hazan, Y. Yaakob, Effect of CNT on microstructural properties of Zn2SiO4/CNT composite via dry powder processing, Mater. Res. Express. 7 (2020) 105601. https://doi.org/10.1088/2053-1591/abbbcb.
M.A. Hazan, M.S. Mamat, I. Ismail, M.Z. Hussein, Y. Yaakob, Fractionation of waste nitrile butadiene rubber (NBR) latex sludge, AIP Conf. Proc. 2151 (2019). https://doi.org/10.1063/1.5124642.
N. Azman, H. Lim, M. Mamat, Y. Sulaiman, Synergistic Enhancement of Ternary Poly(3,4-ethylenedioxythiophene)/Graphene Oxide/Manganese Oxide Composite as a Symmetrical Electrode for Supercapacitors, Energies. 11 (2018) 1510. https://doi.org/10.3390/en11061510.
K.F. Chan, A. Aziz, M.I. Muktar, M.S. Mamat and Y. Yaakob, Optimization of CNTs Dispersion in Ceramic for High Thermal Conductivity, iMTC8.0, JUN 2023
N.I. Azman, A. Aziz, K.F. Chan, M.S. Mamat and Y. Yaakob, PET-GNPs-MWCNTs Nanocomposites for Conductive Membrane Application, iMTC8.0, JUN 2023
N. Gha'far, N.A.A. Roslee, A.N. Nazri and N.Naim, Facile CVD Technique In Producing Green CNTs for Mechanical Enhancements of Aluminium Oxide Coating, iMTC8.0, JUN 2023
M.I Muktar, R. Alfaedi, M.S. Mamat, K.F. Chan, and Y. Yaakob, Carbon Nanotubes (CNTs) Incorporated Anodic Alumina Nanocomposite Film as Protective Layer for Aluminium Alloy, iMTC8.0, JUN 2023
A. Aziz, M.I. Muktar, M.S. Mamat, K.F. Chan, N.A Tahir, S.Liza and Y. Yaakob, Effect of Anodizing Voltage on Surface and Mechanical Properties of CNTs Incorporated Aluminium Oxide Films, MYTribo Symposium, AUGUST 2023
K.F. Chan, S. Liza, H. Miyazaki, M. Tanemura and Y. Yaakob, Carbon Nanotubes Reinforced Zinc Silicate Ceramic Composites for Thermal Enhancement in Phosphor Material, NDNC 2022, MAY 2022
K.F. Chan, M.H.M. Zaid, M.S. Mamat, H. Miyazaki, M. Tanemura and Y. Yaakob, Thermal Conductivity of Carbon Nanotubes Enhanced Zinc Silicate Ceramic Composite, SAES2021, DEC 2021
K.F. Chan, M.N.M. Daud, M.H.M. Zaid, M.S. Mamat and Y. Yaakob, Enhanced Cooling by Reinforcing the Zinc Silicate ceramic composites with Carbon Nanotubes, iFSC 2021, AUG 2021
K.F. Chan, S. Liza and Y. Yaakob, Study on mechanical properties of CNT/Zn₂SiO₄ composite, MERD’20, DEC 2020
K.F. Chan, M.H.M. Zaid, M.S. Mamat and Y. Yaakob, Study on Specific Heat Capacity of Zinc Silicate/Carbon Nanotube Composite, v-MTC4.0, SEP 2020
K.F. Chan, M.H.M. Zaid, M.S. Mamat and Y. Yaakob, Carbon Nanotube embedded Zinc Silicate Ceramics with Narrow Bandgap Properties for Potential Infrared Detector, The International Virtual Conference on Fundamental and Applied Sciences 2020, AUG 2020
K.F. Chan, A.K. Ranude, P. Desai, M. Tanemura, G. Kalita, Y. Iwamoto, S. Honda and Y. Yaakob, Growth of Carbon Nanomaterials Using Household Oil Waste, MJIC 2020, MAR 2020
K.F. Chan, S.M.J. Masanuri, M.H.M. Zaid, and Y. Yaakob, Synthesis of Carbon Nanotube – Zinc Silicate Composite by Powder Processing Method, SAES2019, NOV 2019
K.F. Chan, S.M.J. Masanuri, M.H.M. Zaid, and Y. Yaakob, Effect of Sintering Environment on the Synthesis of Carbon Nanotube-Zinc Silicate Composite, iFSC2019, OCT 2019