GENERAL INFORMATION

2002 MS Degree in Electrical Engineering at the University of Cassino, Italy.

2002 (July – November) Professional collaboration with the Department of Electromagnetism Automation Engineering and Industrial Mathematics of the University of Cassino for technical support to the scientific research project "Measures for testing numerical Telecommunications systems."

2002 (September) Qualification to the profession of engineer in the first session of the state examinations.

2005 (April – July), visiting researcher at the Department of Electrical Engineering, Non-Destructive Testing Laboratory, of the Michigan State University (USA). He worked in the development and manufacturing of an electro-medical devices for non-invasive diagnostic of artificial heart valve.

2006 (January) Professional collaboration with the Department of Automation, Electromagnetism, Information Engineering and Industrial Mathematics of the University of Cassino for research activities related to the scientific research project "methods, devices and innovative measurement systems for the smart monitoring of urban and suburban roads."

2006 (February 1) - 2021 (February 28) University researcher, disciplinary sector of Electrical and Electronic Measurement ING-INF/07, at the Faculty of Engineering of the University of Cassino and Southern Lazio.

2006 (February 3) Ph.D. degree in Electrical and Information Engineering.

2014 National Scientific Qualification (Call 2013 - DD n.161 / 2013) for access to the university professors, competition sector 09 / E4 Measures.

2018 He obtained the National Scientific Qualification (Call DD n.1532 / 2016) for access to the university full professors, competition sector 09 / E4 Measures.

2018 (January 15) – 2019 (October 31) He joined the Department of Medicine and Health Sciences ”Vincenzo Tiberio”, University of Molise, Campobasso, according to the Italian law n. 240/10, art. 6, clause 11.

Since 2018 He is the head of the certified calibration laboratory (LAT105) at University of Cassino and Southern Lazio accredited by the Italian Body ACCREDIA-DT respect to the standard ISO IEC 17025.

Since 2018 he is the coordinator of the working group of the Italian Calibration Laboratories for the sector “vehicle speed meters” Accredited by the Italian Body ACCREDIA-DT respect to the standard ISO IEC 17025.

2020 He is qualified as Quality Assessor to assess Performance Audit of second and third parties according to the standards UNI EN ISO 19011 and UNI EN ISO 9001.

Since 2021 (March 1) He is Associate Professor of Electrical and Electronic Measurement (ING-INF/07), at the Faculty of Industrial and Civil Engineering of the University of Rome La Sapienza.

AWARDS

2003 He won the Young Researchers Project 2003, instituted by the University of Cassino and aimed at financing research projects carried out by young researchers, presenting a project entitled "Development of methods and tools for performing non-destructive tests on conductive materials. "

2007 (September) He won the award doctoral “Carlo Offelli” from the Italian Society of Electrical and Electronic Measurements for the best doctoral thesis in the measures field, discussed in calendar years 2005 and 2006.

2008 (Murch) He won the award doctoral “Premio Tesi 2007” from BIC Lazio for the best doctoral thesis in the ambit of University & Business program.

NATIONAL AND INTERNATIONAL SOCIETIES

Since 2002 he is a member of the  Italian Society of Electric and Electronic Measurement

Since 2005 he is a member of the Italian Federation of Electrical Science, Automation, Computer  Science and Telecommunication (AEIT). Since 2012 he is treasurer of the Cassino Section of the AEIT.

Since 2006 he is a member of the Institute of Electrical and Electronic Engineer (IEEE).

Since 2006 he is a member of the Instrumentation and Measurement Society of the Institute of Electrical and Electronic Engineer (IEEE).

2006-2008 He is member of the organizing committee of the PhD school “The measurement in the information society” organized by the Italian Society of Electric and Electronic Measurement.

Since 2007 he is a member of the Interuniversity Consortium for Research "Metrics and Measurement Technology on Electric Systems" (ME.S.E).

Since 2018 he is member of the TC-1, Technical Committee on Nondestructive Evaluation and Industrial Inspection (NDE&II) of the IEEE Instrumentation and Measurement Society.

Since 2022 he is member of the Italian Society for Non-Destructive Testing Monitoring and Diagnostics (AIPND). In behalf of this Society, he is the scientific coordinator of the commission for Non Destructive Evaluation 4.0 (NDE4.0).

NATIONAL AND INTERNATIONAL CONFERENCES ACTIVITIES

Since 2006 he is member of the international technical program committee of several international conferences such as: IEEE International Instrumentation and Measurement Technology Conference; IEEE International Workshop on Metrology for Aerospace, IMEKO-TC4, International Symposium on Applied Electromagnetics and Mechanics, etc.

2010 He is member of the technical and scientific organizing committee of the VII Italian Workshop Sol-Gel, held in Napes 17-18 of June.

2014 He is the co-organizer (together with the Italian Center for Aerospace research) and session chair of the special session “Acoustic and Electromagnetic Antennas for aerospace measurement” at the IEEE International Workshop on Metrology for Aerospace

2015, 2016, 2017, 2018 He is the co-organizer (together with the Instituto Superior Técnico Instituto de Telecomunicações, Lisbon) and session chair of the special session “Non-Destructive Testing and Evaluation for Aerospace” at the IEEE International Workshop on Metrology for Aerospace

2018 Technical Program co-Chair of the IEEE International Workshop on Metrology for Archaeology and Cultural Heritage held in Cassino (Italy) 22-24 of October.

2019, 2020, 2021, 2022, 2023, 2024, 2025 He is the co-organizer (together with the University of Naples Federico II) and session chair of the special session “Structural Health Monitoring and NonDestructive Testing for Aerospace” at the IEEE International Workshop on Metrology for Aerospace

2021 He is the co-organizer (together with the National Institute of Metrology, NIM - China) and session chair of the special session “ON-BOARD AND OFF-BOARD VEHICLE SPEED METERS: DESIGN, REALIZATION, CALIBRATION AND DIAGNOSIS” at the IEEE International Workshop on Metrology for Automotive

2024 He is the General co-Chair of the IEEE International Symposium on Measurements and Networking held in Rome (Italy) 02-05 of July 

INTERNATIONAL JOURNAL ACTIVITIES

Since 2007 Referee of IEEE Transaction on Instrumentation and Measurement

Since 2013 Referee of IEEE Sensor Journal

Since 2013 Referee of Measurement the International Measurement Confederation - Elsevier

Since 2014 Referee of Sensors and Actuators (Elsevier)

Since 2014 Referee of MDPI — Metals

Since 2017 Referee of Nondestructive Testing and Evaluation - Elsevier

Since 2018 Referee of Journal of Instrumentation (JINST) – SISSA and IOP

Since 2018, he is Associate Editor of the International Journal Measurement of the International Measurement Confederation - Elsevier

Since 2019, he is Associate Editor of the International Journal Measurement: Sensors – Elsevier

2019/2020 Guest Editor of the Special Issue "Sensors Applied to Nondestructive Testing and Structural Health Monitoring", Sensors MDPI (ISSN 1424-8220).

2021 Guest Editor of the Special Issue "Structural Health Monitoring and Non-Destructive Testing for Engineering Applications: Advances in Sensor and Technologies", Sensors MDPI (ISSN 1424-8220).

PHD SCHOOL ACTIVITIES

2016 Member of the commission of the final Ph.D. defense, at the PhD course in “Information Engineering”, University of Sannio, Italy.

2020-2021     Member of the Scientific Board of the PhD Course in "INTELLIGENCE, CYBER SECURITY, GLOBAL ECONOMY AND SOCIETY", LINK CAMPUS University

2020 Member of the commission of the final Ph.D. defense, at the PhD course in “Electrical and Information Engineering”, University of Cassino and Southern Lazio, Italy.

Since 2021 Member of the Scientific Board of the PhD Course in " ELECTRICAL, MATERIALS, RAW MATERIALS AND NANOTECHNOLOGY ENGINEERING, Sapienza University of Rome, Italy.

2021 External Referee for the evaluation of the final thesis of a Ph.D. candidate of the PhD Course in “Industrial Engineering”, University of Salerno, Italy.

TEACHING ACTIVITIES

2006-2010     Teacher of the course of “Automatic Measurement Systems” - bachelor’s degree in Industrial Engineering, University of Cassino, Italy.

2007-2010     Teacher of the course of “Measurement for the Automation and the Industrial Production” - bachelor’s degree in Industrial Engineering, University of Cassino, Italy.

2009 Teacher of the course of “Fault Detection, Isolation and Accommodation” - FADTAD LABNET PROJECT (creation of a laboratory network for the design and assessment of Failure Analysis and Damage Tolerance), University of Cassino, Italy.

2010-2012     Teacher of the course of “Fundamental of Measurements” - bachelor’s degree in Management Engineering, University of Cassino, Italy.

2010 Teacher of the course of “Maintenance of photovoltaic plants” - SPAL PROJECT (Installer and maintainers of photovoltaic plants), University of Cassino, Italy.

2012 Teacher of the course of “Measurement for the management of the energy quality” – Master’s degree in "City Utility: Management and development of technological supplies and services with territorial infrastructure networks", University of Cassino, Italy.

2013-2020 Teacher of the course of “Industrial Measurements” - bachelor’s degree in Industrial Engineering, University of Cassino, Italy.

2013-2018 Teacher of the course of “Measurement for the management of the quality and safety” - master’s degree in Management Engineering, University of Cassino, Italy.

2013 - 2021 Teacher of the course of “Measurement and techniques applied to sport” - bachelor’s degree in Sports Science, University of Cassino, Italy.

From 2021 he is Teacher of the course of “Electrical Measurements” master’s degree in Electrical Engineering, Sapienza University of Rome Italy.

From 2021 he is Teacher of the course of “Smart Metering” master’s degree in Electrical Engineering, Sapienza University of Rome Italy.

From 2022 he is Teacher of the course of “Fundamental of Electrical Engineering” master’s degree in Electrical Engineering, Sapienza University of Rome Italy.

NATIONAL AND INTERNATIONAL RESEARCH PROJECTS

Since 2003 he is participant of several research projects admitted to financing with competitive calls or financed by companies in the sector concerning with measurement systems for non-destructive testing, realization and characterization of innovative sensors, Power Quality measurement, measure of electrical quantities in sinusoidal and non-sinusoidal conditions, methods and systems for the calibration of vehicle speed meters.

In the following are reported only some of these projects with particular attention to that admitted to financing with competitive calls.

2007 Participant to the Research Project of National Interest PRIN 2007- “Measurement methodologies and characterization of electricity energy meters in non-sinusoidal condition and in presence of electromagnetic interference”, financed by the Italian Ministry of University and Scientific Research.

2009 Participant to the Research Project of National Interest PRIN 2009- “Characterization and in field calibration of measurement system for electric power and energy under non sinusoidal conditions”, financed by the Italian Ministry of University and Scientific Research.

2015 Participant to the Research Project of National Interest PRIN 2015- “Six DOF scalable finger tracking system”, financed by the Italian Ministry of University and Scientific Research.

2016 Participant to the Research Project Grant F4E-GRT-0640-“Development of a Measuring System of Induced Voltages in Ferromagnetic Structures”, financed by the European Union.

2016 Participant to the Research Project (Marie Skłodowska-Curie Innovative Training Networks) - Call: H2020 — H2020-MSCA-ITN-2016 - Proposal: 722134 — Title: NDTonAIR, on the research activities related to Non-Destructive Testing. The project was financed by the European Union

2018-2020 Technical and scientific coordinator of the research project POR CAMPANIA FESR 2014/2020 - Asse Prioritario 1 “Ricerca e Innovazione”: Fault Diagnosis and Predictive Maintenance in Innovative Energy Systems financed by Campania Region.

ACTUAL RESEARCH INTERESTS

His current research interests are concerned with the design, realization and metrological characterization of measurement systems to perform Non Destructive Testing via Eddy Current, sensor design, realization and characterization for different applications such as wearable devices air and water pollutants, impedance measurement (R, L, C parameters) in sinusoidal and non-sinusoidal condition also using complex optimized signals, state of health and state of charge evaluation on battery for vehicle applications, measurement systems for the Power Quality on the electrical network, measurement of electrical power and energy under non-sinusoidal condition, methods and systems for the calibration of vehicle speed meters.

The results of these research activities are published on more than 150 scientific manuscripts, issued on national and international journals and conference proceedings.