Razavi, S.M.J., Avanzini, A., Cornacchia, G., Giorleo, L., Berto, F. Effect of heat treatment on fatigue behavior of as-built notched Co-Cr-Mo parts produced by Selective Laser Melting (2021) International Journal of Fatigue, 142, art. no. 105926. DOI: 10.1016/j.ijfatigue.2020.105926

Giorleo, L., Bonaventi, M. Casting of complex structures in aluminum using gypsum molds produced via binder jetting (2021) Rapid Prototyping Journal, 27 (11), pp. 13-23. DOI: 10.1108/RPJ-03-2020-0048

Giorleo, L., Tegazzini, F., Sartore, L. 3D printing of gelatin/chitosan biodegradable hybrid hydrogel: Critical issues due to the crosslinking reaction, degradation phenomena and process parameters (2021) Bioprinting, 24, art. no. e00170. DOI: 10.1016/j.bprint.2021.e00170

Giorleo, L., Papa, I., Silvestri, A.T. Pin-bearing mechanical behaviour of continuous reinforced Kevlar fibre composite fabricated via fused filament fabrication (2022) Progress in Additive Manufacturing, 7 (4), pp. 723-735. DOI: 10.1007/s40964-022-00261-2

Avanzini, A., Battini, D., Giorleo, L. Finite element modelling of 3D printed continuous carbon fiber composites: Embedded elements technique and experimental validation (2022) Composite Structures, 292, art. no. 115631. DOI: 10.1016/j.compstruct.2022.115631

Giorleo, L., Stampone, B., Trotta, G. Micro injection moulding process with high-temperature resistance resin insert produced with material jetting technology: Effect of part orientation (2022) Additive Manufacturing, 56, art. no. 102947. DOI: 10.1016/j.addma.2022.102947

Giorleo, L., Ceretti, E. Deep drawing punches produced using fused filament fabrication technology: Performance evaluation (2022) Journal of Manufacturing Processes, 84, pp. 1-9. DOI: 10.1016/j.jmapro.2022.09.054

Giorleo, L. Deep Drawing of AISI 304 Blanks with Polymer Punches Produced by Additive Manufacturing: Effects of Process Scalability (2022) Applied Sciences (Switzerland), 12 (24), art. no. 12716. DOI: 10.3390/app122412716

Giorleo, L., Varlik, E., Montesano, L., Pola, A. Burnout treatment on plaster mould produced with binder jetting technology: effect of process parameters and geometrical complexity (2023) International Journal of Advanced Manufacturing Technology, 124 (7-8), pp. 2769-2780. DOI: 10.1007/s00170-022-10700-7

Giorleo, L., Papa, I., Silvestri, A.T., Squillace, A. Pin-bearing mechanical behaviour of composites fabricated via fused filament fabrication as a function of reinforcing, pin diameter and W/D ratio (2023) Composite Structures, 321, art. no. 117227. DOI: 10.1016/j.compstruct.2023.117227

Giorleo, L., Ravelli, M. Laser Polishing of Polymer Parts Produced with Material Jetting Technology: Effect of Laser Scan Speed, Overlapping and Loop Cycles (2023) Journal of The Institution of Engineers (India): Series C 104 (5), pp. 1065-1077. DOI: 10.1007/s40032-023-00979-0

Giorleo, L., Ceretti, E. Aluminium deep drawing with additive manufacturing polymer punches: analysis of performance in small batch production (2023) International Journal of Advanced Manufacturing Technology, 128 (5-6), pp. 2175-2185. DOI: 10.1007/s00170-023-12066-w

Arrivabeni, E.B., Barbato, M.C., Giorleo, L. Thermo-fluid dynamics modelling of conformal cooling channels produced with material jetting technology (2023) International Journal of Mechatronics and Manufacturing Systems, 16 (2-3), pp. 225-242. DOI: 10.1504/IJMMS.2023.133399

Battini, D., Giorleo, L., Avanzini, A. Effects of fiber layout on strength and failure of 3D printed notched composites (2024) Composite Structures, 327, art. no. 117644. DOI: 10.1016/j.compstruct.2023.117644

Stampone, B., Deniz, K.I., Foscarini, A., Turco, A., Chiriacò, M.S., Ferrara, F., Giorleo, L., Trotta, G. Rapid Tooling for Microinjection Moulding of Proof-of-Concept Microfluidic Device: Resin Insert Capability and Preliminary Validation (2024) Applied Sciences (Switzerland), 14 (8), art. no. 3157.

Impaziente, F., Giorleo, L., Mazzucato, F. Selective laser melting of H13 tool steel powder: effect of process parameter on complex part production (2024) Progress in Additive Manufacturing, 9 (4), pp. 1071-1084. DOI: 10.1007/s40964-023-00504-w

Giorleo, L., Deniz, I.K., Ravelli, M. Polymer Shaped Punches Produces with Fused Filament Fabrication to Improve Cup Accuracy in Sheet Metal Forming (2024) Journal of Research Updates in Polymer Science, 13, pp. 165-174. DOI: 10.6000/1929-5995.2024.13.18

Gaudenzi G., Giorleo L., Ceretti E. Performance analysis of composite and steel deep drawing tools combination (2024) International Journal of Advanced Manufacturing Technology. DOI: 10.1007/s00170-024-14875-z

Stampone, B., Giorleo, L., Trotta, G. The behaviour of micro-injection moulding inserts produced with material jetting technology (2025) Composites Part B: Engineering, 288, art. no. 111913, . DOI: 10.1016/j.compositesb.2024.111913