The CCI Makerspace does not have a service for purchasing filament or other materials. We do, however, provide free filament for use in small prints. We offer 50g of filament per week to be used for printing. If you are interested in printing larger projects the Makerspace supports the use of personal filament. These filaments must be approved by Makerspace staff before being used in Makerspace machines. The space does not allow personal materials to be stored for extended periods of time. For use in the CCI Makerspace filament must be 1.75mm PLA with no additives and must be from a reputable brand.  Below are a few officially supported brands. Other brands may be used but they must be approved before use and must have an associated Material Data Sheet. To be sure that you can use a roll of filament, please check with a staff member before purchasing. 

The CCI Makerspace provides cardboard and access to a public scrap bin for use with laser cutters. There is no access to wood or acrylic provided by the Makerspace. Patrons are to provide their own materials for use with the laser cutter. These materials should be checked by a Makerspace staff member. It is highly recommended that you find the material data sheet for a material. Some sellers may not be selling what they claim, so it's important to verify.  To ensure that a material can be used in the Makerspace check with a staff member before purchase.

The CCI Makerspace provides access to