Electrical Engineer, Researcher and Educator
My new homepage is here: https://iitdh.ac.in/~kabhijit/
Assistant Professor,
Dept. of Electrical Engineering,
Indian Institute of Technology, Dharwad, India.
Formerly Research Fellow under the ORISE-ASTRO Program
National Transportation Research Center,
Oak Ridge National Lab, Knoxville TN
(June 2019 - January 2020)
Formerly Post-doctoral associate
in Prof. Ned Mohan's Lab, ECE Department
University of Minnesota, Minneapolis
(November 2016 - June 2019)
Ph. D. Electrical Engineering, IISc Bangalore (2016)
M. Tech. Electronic Sys. Engineering, IISc Bangalore (2010)
1. A Kshirsagar, RS Kaarthik, K Gopakumar, L Umanand, K Rajashekara: Low Switch Count Nine-Level Inverter Topology for Open-End Induction Motor Drives, IEEE Trans. on Industrial Electronics
2. A Kshirsagar, S Kaarthik, K Gopakumar, L Umanand, S Biswas, C Cecati: A Low Component Count Seventeen-Level Inverter for Open-End IM Drives, IET Power Electronics
3. A Kshirsagar, RS Kaarthik, M Boby, L Umanand, K Gopakumar: Elimination of dead-time transients in a three-level flying capacitor inverter using a state machine for switching state sequence selection, IEEE Power Electronics, Drives and Energy Systems (PEDES) 2016
1. A Kshirsagar, A Ramanath, Jeyaram D, T Sreekanth, N Mohan: Analytical modeling of MMCs with asymmetric cell voltages for utility-scale renewable energy integration, IEEE COMPEL 2019
1. VN Vipin, A Kshirsagar, D Opila, N Mohan: Utility scale interface for renewables and storage using a power electronic transformer with back-to-back MMCs: A novel control scheme, IEEE North American Power Symposium (NAPS) 2017
2. VN Vipin, A Kshirsagar, D Opila, N Mohan: Utility Scale Interface for Renewables and Storage using a Power Electronic Transformer with Back-to-Back MMCs: A Novel Proposal and Control Scheme for Virtual Inertia, IEEE ECCE 2018
1. S Krishnamoorthi, S Tewari, S Raju, A Kshirsagar, D Opila, N Mohan: A ride-through method using input-filter capacitors for three-level indirect matrix converter based open-end winding drive, ECCE 2017
1. Teaching "EE2701: Sustainable Electricity Supply" to EE undergraduates in Spring 2019.
2. Developed experiments and materials for Laboratory Course "EE1703: Climate Crisis: Implementing Solutions"
3. Created module on EMI/EMC for Power Electronics Engineers for CUSP at UMN (2017). Instructor: Profs Ned Mohan and Bill Robbins
4. Created Simulation toolkit using gEDA and ngSPICE for Digital Controller Design Course at IISc (2015) Instructor: Prof L. Umanand
1. Power Electronics
2. Electronic System Design
3. Analysis and mitigation of noise, EMI and EMC in electronic system