List of publication

Journal Publications

1. A Hottin, M Naït-Abdelaziz, A Talha, R Kadri, G Ayoub. "Modeling the thermo-oxidative aging effects on fatigue life of natural rubber using a continuum damage mechanics approach". Mechanics of Materials, 198, 105131. 

2. OAA Modad, J Ryska, A Chehade, G Ayoub. "Revolutionizing sheet metal stamping through industry 5.0 digital twins: a comprehensive review". Journal of Intelligent Manufacturing, 1-23. 

3. T Khraishi, G Ayoub, S Mesarovic, M Shehadeh. "Preface: the physics of metal plasticity". Journal of Materials Science 59 (12), 4723-4727. 

4. A Ghaderi, G Ayoub, R Dargazany. "Constitutive behavior and failure prediction of crosslinked polymers exposed to concurrent fatigue and thermal aging: a reduced-order knowledge-driven machine-learned model". Journal of Materials Science 59 (12), 5066-5084.

5. R Serrano, G Ayoub, R Ambriz. "Continuum damage mechanics-coupled plasticity modeling of mechanical behavior in AA6061-T651 CMT-welded joints" Journal of Materials Science 59 (12), 5025-5046. 

6. G Ayoub, OAA Modad, AH Kobaissy, M Shehadeh, I Mastorakos. "Strain hardening and microstructure evolution in ECAP-processed ultrafine-grained metals: a comparative study of copper, aluminum, and magnesium alloys" Journal of Materials Science 59 (12), 4995-5024. 

7. G Ayoub, M Makki, R Kadri, R Dargazany, MN Abdelaziz. "Micromechanical modeling of the effects of crystal content on the visco-hyperelastic-viscoplastic behavior and fracture of semi-crystalline polymers." Mechanics of Materials 189, 104897. 

8. M Makki, CW Lee, G Ayoub. "Stress Distribution Inside a Lithium-Ion Battery Cell during Fast Charging and Its Effect on Degradation of Separator". Batteries 9 (10), 502

9. M Makki, G Ayoub, CW Lee, C Bae, X Colin. "Effect of battery fast cyclic charging on the mechanical and fracture behavior of the lithium-ion battery separator." Polymer Degradation and Stability 216, 110469. 

10. M Makki, G Ayoub, C Pannier, R Dargazany, R Kadri, MN Abdelaziz. "Micromechanical modeling of the visco-hyperelastic–viscoplastic​ behavior and fracture of aged semicrystalline polymer". International Journal of Non-Linear Mechanics 155, 104456.

11. R Kadri, M Nait Abdelaziz, B Fayolle, G Ayoub, MB Hassine, Y Nziakou. "Micromechanical based model for predicting aged rubber fracture properties". International Journal of Fracture 243 (2), 125-142. 

12. A Kassab, D Al Nabhani, P Mohanty, C Pannier, GY Ayoub. "Advancing plastic recycling: Challenges and opportunities in the integration of 3d printing and distributed recycling for a circular economy". Polymers 15 (19), 3881. 

13. M Makki, CW Lee, G Ayoub. "Stress Development Under Fast Charging and Its Effect on Degradation of Separator". Electrochemical Society Meeting Abstracts 243, 486-486

14. M Makki, G Ayoub, CW Lee. "Modeling the anisotropic behavior of highly orthotropic lithium-ion batteries polymer separators". International Journal of Solids and Structures 264, 112102

15. D Al Nabhani, A Kassab, O Habbal, P Mohanty, G Ayoub, C Pannier. "Benchmarking the Tensile Properties of Polylactic Acid (PLA) Recycled Through Fused Granule Fabrication Additive Manufacturing. "University of Texas at Austin. 

16. O Habbal, A Kassab, G Ayoub, P Mohanty, C Pannier. "System identification of fused filament fabrication additive manufacturing extrusion and spreading dynamics". University of Texas at Austin

17. Amir Bahrololoumi, Mamoon Shaafaey, Georges Ayoub, Roozbeh Dargazany. “Thermal aging coupled with cyclic fatigue in cross-linked polymers: Constitutive modeling & FE implementation”. International Journal of Solids and Structures, 2022, 252, 111800.

18.  Amir Bahrololoumi, Mamoon Shaafaey, Georges Ayoub, Roozbeh Dargazany. “A failure model for damage accumulation of cross-linked polymers during parallel exposure to thermal aging & fatigue”. International Journal of Non-Linear Mechanics, 2022, 146, 104142.

19. K.N. Cundiff, G. Ayoub, A.A. Benzerga. “Modeling the viscoplastic behavior of a semicrystalline polymer”. International Journal of Solids and Structures,2022, 254–255, 111920.

20. Mustapha Makki, Georges Ayoub, Cheol W. Lee. “Modeling the anisotropic behavior of highly orthotropic lithium-ion batteries polymer separators”. International Journal of Solids and Structures, 2023, 264, 112102.

21. Aref Ghaderi , SeyedAmir Bahroloumi , Ramin Akbari , Georges Ayoub , Roozbeh Dargazany , Armin Babaei, Hadis Nouri, Fatigue Behavior of Polymers March 2023 In book: Encyclopedia of Polymer Science and Technology, accepted, in-print.

22. A.A.H.I. Kobaissy, G. Ayoub, M. Shehadeh. “Modeling of the tension-compression asymmetry reduction of ECAPed Mg-3Al-1Zn through grain fragmentation”. Computational Materials Science, 2022, 210, 111439.

23. R Serrano, RR Ambriz, G Ayoub, D Jaramillo. « Mechanical Behavior of Armor Steel Gas Metal Arc Welding Joints Performed by Nickel-Chromium and Low-Alloy Steel Filler Metals”. Journal of Materials Engineering and Performance, 2022, 1-13.

24. H. Lamnii, M. Nait Abdelaziz, G. Ayoub, X. Colin, U. Maschke. “Experimental investigation and modeling attempt on the effects of ultraviolet aging on the fatigue behavior of an LDPE semi-crystalline polymer”. International Journal of Fatigue, 2021, Impact Factor: 3.123, H index: 101, 66, 142, 105952.

25. G. Ayoub, A.K. Rodriguez, B. Mansoor, X. Colin. “Modeling the visco-hyperelastic–viscoplastic behavior of photodegraded semi-crystalline low-density polyethylene films”. International Journal of Solids and Structures, 2020, Impact Factor: 2.566, H index: 138, 204-205, pp. 187–198.

26. A.K. Rodriguez, B. Mansoor, G. Ayoub, X. Colin, A.A. Benzerga. “Effect of UV-aging on the mechanical and fracture behavior of low density polyethylene”. Polymer Degradation and Stability, 2020, Impact Factor: 4.032, H index: 138, 150, 109185.

27. A.A.-H. Kobaissy, G. Ayoub, W. Nasim, I. Karaman, M. Shehadeh. “Modeling of the ECAP Induced Strain Hardening Behavior in FCC Metals”. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 2020, Impact Factor: 2.274, H index: 146, 51(10), pp. 5453–5474.

28. K. Wang, G. Ayoub, A. Ilinich, G. Kridli. “Effect of Trimming Process Parameters on Sheared Edge Geometry and Stretch Limit: An Experimental Investigation”. Journal of Materials Engineering and Performance, 2020, Impact Factor: 1.652, H index: 59,  29(9), pp. 5933–5949

29. A.A. Chehade, T.M. Belgasam, G. Ayoub, H.M. Zbib. “Accelerating the Discovery of New DP Steel Using Machine Learning-Based Multiscale Materials Simulations”. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 2020 Impact Factor: 2.274, H index: 146, 51(6), pp. 3268–3279

30. K.G. Zeno, S. Mustapha, G. Ayoub, J.G. Ghafari. “Effect of force direction and tooth angulation during traction of palatally impacted canines: A finite element analysis”. American Journal of Orthodontics and Dentofacial Orthopedics, 2020, Impact Factor: 1.84, H index: 105,  157(3), pp. 377–384

31. S. Kassar, G. Ayoub, G., Kridli. “Anisotropic time dependent and continuum damage coupled plasticity model: An application for Mg AZ31B”. International Journal of Solids and Structures, 2019, Impact Factor: 2.566, H index: 138, 178-179, pp. 199–211.

32. M. Nait Abdelaziz, G. Ayoub, X. Colin, M. Benhassine, M. Mouwakeh. “ New developments in fracture of rubbers: Predictive tools and influence of thermal aging”. International Journal of Solids and Structures, 2019, Impact Factor: 2.566, H index: 138, 165, pp. 127-136.

33. M. Damadam, M. Anazi, G. Ayoub, H. Zbib, “Atomistically Informed and Dislocation-Based Viscoplasticity Model for Multilayer Composite Thin Films”, Journal of Engineering Materials and Technology, 2019, Impact Factor: 0.828, H index: 58,   Transactions of the ASME 141(2),021010.

34. A.H. Kobaissy, G. Ayoub, L.S. Toth, S. Mustapha, M. Shehadeh. “Continuum dislocation dynamics-based grain fragmentation modeling”. International Journal of Plasticity, 2019, Impact Factor: 5.502, H index: 115, 114, pp. 252-271

35. W. Yang, G. Ayoub, I. Salehinia, B. Mansoor, H. Zbib. “The effect of layer thickness ratio on the plastic deformation mechanisms of nanoindented Ti/TiN nanolayered composite”. Computational Materials Science, 2018, Impact Factor: 2.530, H index: 91, 154, pp. 488-498.

36. T. Mungole, B. Mansoor, G. Ayoub, D.P. Field. “Bifurcation in deformation mechanism to overcome strength-ductility paradox in metal-ceramic multilayer thin-films”. Applied Physics Letters, 2018, Impact Factor: 3.497, H index: 385, 113(10),101902.

37. M. Damadam, S. Shao, G.  Ayoub, G., H.M. Zbib. “Recent advances in modeling of interfaces and mechanical behavior of multilayer metallic/ceramic composites”. Journal of Materials Science, Impact Factor: 2.993, H index: 143, 2018, 53, pp. 5604-5617.

38. V.C. Shunmugasamy, B.  Mansoor, G.  Ayoub, R. Hamade. “Friction Stir Welding of Low-Carbon AISI 1006 Steel: Room and High-Temperature Mechanical Properties”, Journal of Materials Engineering and Performance, 2018, Impact Factor: 1.095, H index: 49, 27, pp. 1673-1684.

39. A.U. Chaudhry, B. Mansoor, T. Mungole, G. Ayoub, G., D.P. Field. “Corrosion mechanism in PVD deposited nano-scale titanium nitride thin film with intercalated titanium for protecting the surface of silicon”. Electrochimica Acta, 2018, Impact Factor: 5.116, H index: 202, 264, pp. 69-82.

40. M.A. Fakih, S.  Mustapha, J. Tarraf, G. Ayoub, R.  Hamade. “Detection and assessment of flaws in friction stir welded joints using ultrasonic guided waves: experimental and finite element analysis”. Mechanical Systems and Signal Processing, 2018, Impact Factor: 4.370, H index: 121, 101, pp. 516-534.

41. G. Ayoub, G., A.K. Rodrigez, M. Shehadeh, G. Kridli, J.P.  Young, H.M. Zbib. “Modelling the rate and temperature-dependent behaviour and texture evolution of the Mg AZ31B alloy TRC sheets”. Philosophical Magazine, 2018, Impact Factor: 1.632, H index: 73, 98, pp. 262-294.

42. J. Tarraf, S. Mustapha, M.A. Fakih, M. Harb, H. Wang, G. Ayoub, R.  Hamade. “Application of ultrasonic waves towards the inspection of similar and dissimilar friction stir welded joints”. Journal of Materials Processing Technology, 2018, Impact Factor: 3.647, H index: 143, 255, pp. 570-583.

43. M. Makki, G. Ayoub, H. Abdul-Hameed, F. Zairi, F. Zaïri, B. Mansoor, M. Naït-Abdelaziz, M. Ouederni, F. Zaïri. “Mullins effect in polyethylene and its dependency on crystal content: A network alteration model”. Journal of the Mechanical Behavior of Biomedical Materials, 2017, Impact Factor: 3.239, H index: 57, 75, pp. 442-454.

44. M. Damadam, S. Shao, I. Salehinia, I. Mastorakos, G. Ayoub, H.M Zbib. “Strength and plastic deformation behavior of nanolaminate composites with pre-existing dislocations”. Computational Materials Science, 2017, Impact Factor: 2.292, H index: 91, 138, pp. 42-48.

45. M. Damadam, S. Shao, I. Salehinia, G. Ayoub, H.M. Zbib. “Molecular dynamics simulations of mechanical behavior in nanoscale ceramic–metallic multilayer composites”. Materials Research Letters, 2017, Impact Factor: 6.161, H index: 23, 5(5), pp. 306-313.

46. W. Yang, G. Ayoub, I. Salehinia, B. Mansoor, H. Zbib. “Multiaxial tension/compression asymmetry of Ti/TiN nano laminates: MD investigation”. Acta Materialia, 2017, Impact Factor: 6.036, H index: 236, 135, pp. 348-360.

47. T. Mungole, B. Mansoor, G. Ayoub, D.F. Field. “Bifurcation in deformation behavior of Cu and Ta by accumulative roll-bonding at high temperature” Scripta Materialia, 2017, Impact Factor: 3.747, H index: 161, 136, pp. 87-91.

48. A. Dorbane, G. Ayoub, B. Mansoor, R.F Hamade, A. Imad. “Effect of Temperature on Microstructure and Fracture Mechanisms in Friction Stir Welded Al6061 Joints”. Journal of Materials Engineering and Performance, 2017, Impact Factor: 1.094, H index: 49, 26(6), pp. 2542-2554.

49. W. Yang, G. Ayoub, I. Salehinia, B. Mansoor, H. Zbib. “Deformation mechanisms in Ti/TiN multilayer under compressive loading”. Acta Materialia, 2017, Impact Factor: 6.036, H index: 236, 122, pp. 99-108.

50. A.K. Rodriguez, G. Ayoub, B. Mansoor, A.A. Benzerga. “Effect of strain rate and temperature on fracture of magnesium alloy AZ31B” Acta Materialia, 2016, Impact Factor: 6.036, H index: 236, 112, pp. 194-208.

51. A. Dorbane, B. Mansoor, G. Ayoub, V.C. Shunmugasamy, A. Imad. “Mechanical, microstructural and fracture properties of dissimilar welds produced by friction stir welding of AZ31B and Al6061”. Materials Science and Engineering A, 2016, Impact Factor: 3.414, H index: 192, 651, pp. 720-733.

52. A. Dorbane, G. Ayoub, B. Mansoor, R.F. Hamade, G. Kridli, R. Shabadi, A. Imad. “Microstructural observations and tensile fracture behavior of FSW Twin Roll Cast AZ31 Mg Sheets”. Materials Science and Engineering A, 2016, Impact Factor: 3.414, H index: 192, 649, pp. 190-200.

53. A.H. Ammouri, G. Kridli, G. Ayoub, R.F. Hamade. “Relating grain size to the Zener–Hollomon parameter for twin-roll-cast AZ31B alloy refined by friction stir processing”. Journal of Materials Processing Technology, 2015, Impact Factor: 3.647, H index: 143, 222, pp. 301-306.

54. J.P. Young, G. Ayoub, B. Mansoor, D. Field. “The effect of hot rolling on the microstructure, texture and mechanical properties of twin roll cast AZ31Mg”. Journal of Materials Processing Technology, 2015, Impact Factor: 3.647, H index: 143, 216, pp. 315-327.

55. A. Dorbane, G. Ayoub, B. Mansoor, R. Hamade, G. Kridli, A. Imad. “Observations of the mechanical response and evolution of damage of AA 6061-T6 under different strain rates and temperatures”. Materials Science and Engineering: A, 2015, Impact Factor: 3.414, H index: 192, 624, pp. 239-249.

56. E. Dogan, I. Karaman, G. Ayoub, G. Kridli. “Reduction in tension-compression asymmetry via grain refinement and texture design in Mg-3Al-1Zn sheets”. Materials Science and Engineering A., 2014, Impact Factor: 3.414, H index: 192, 610, pp. 220-227.

57. H. Abdul-Hameed, T. Messager, G. Ayoub, F. Zaïri, M. Naït-Abdelaziz, Z. Qu, F. Zaïri. “A two-phase hyperelastic-viscoplastic constitutive model for semi-crystalline polymers: Application to polyethylene materials with a variable range of crystal fractions”. Journal of the Mechanical Behavior of Biomedical Materials, 2014, Impact Factor: 3.239, H index: 57, pp. 323-332.

58. T. Abovyan, G. Kridli, G. Ayoub, P. Friedman. “Formability prediction of Aluminum Sheet Alloys under Isothermal Forming Conditions”. Journal of Manufacturing Processes, 2014, Impact Factor: 2.809, H index: 31.

59. G. Ayoub, M. Naït-Abdelaziz, F. Zaïri. “Multiaxial fatigue predictors for rubber: application of recent development to a Carbon-filled SBR”. International Journal of Fatigue, 2014, Impact Factor: 3.123, H index: 101, 66, pp. 168-176.

60. G. Ayoub, F. Zaïri, M. Naït-Abdelaziz, J.M. Gloaguen, G. Kridli. “A visco-hyperelastic damage model for cyclic stress-softening, hysteresis and permanent set in rubber using the network alteration theory”. International Journal of Plasticity, 2014, Impact Factor: 5.502, H index: 115, 64, pp. 19-33.

61. A.K Rodriguez, G. Kridli, G. Ayoub, H. Zbib. “Effect of the strain rate and temperature on the microstructure evolution of twin roll cast wrought AZ31B alloys sheets”. Journal of Materials Engineering and Performance, 2013, Impact Factor: 1.094, H index: 49, pp 3115-3125.

62. A.K. Rodriguez, G. Ayoub, G. Kridli, H. Zbib. “Time dependent magnesium AZ31B behavior: Experimental and physically based modeling investigation”. Physics Procedia, 2014, Impact Factor: 0.64, H index: 37, 55, pp. 46-52.

63. A.H. Ammouri, G. Kridli, G. Ayoub, R.F. Hamade. “Investigating the effect of cryogenic pre-cooling on the friction stir processing of AZ31B”. Lecture Notes in Engineering and Computer Science, 2014, Impact Factor: 2, H index: 13, pp. 1137-1140.

64. E. Dogan, M.W.  Vaughan, C. Hayrettin, I. Karaman, G. Ayoub. “The role of deformation modes on ductility and dynamic recrystallization behavior of AZ31 Mg alloy at low temperatures”. Magnesium Technology, H index: 16, 2014, pp. 155-160.

65. A.K Rodriguez, G. Kridli, G. Ayoub, H. Zbib. “Effect of the strain rate and temperature on the microstructure evolution of twin roll cast wrought AZ31B alloys sheets”. Journal of Materials Engineering and Performance, 2013, Impact Factor: 1.094, H index: 49, 22(10), pp. 3115-3125.

66. G. Ayoub, M. Naït-Abdelaziz, F. Zaïri, J.M. Gloaguen, P. Charrier. “Fatigue life prediction of rubber-like materials under multiaxial loading using a continuum damage mechanics approach: effects of variable amplitude and R ratio”. Mechanics of Materials, 2012, Impact Factor: 2.697, H index: 87, 52, pp. 87-102.

67. G. Ayoub, M. Naït-abdelaziz, F. Zaïri, J.M. Gloaguen. “A continuum damage model for the high-cycle fatigue life prediction of styrene-butadiene rubber under multiaxial loading”. International Journal of Solids and Structures, 2011, Impact Factor: 2.566, H index: 138, 48(18), pp. 2458-2466.

68. G. Ayoub, F. Zaïri, M. Naït-Abdelaziz, J.M. Gloaguen. “Modeling the low-cycle fatigue behavior of visco-hyperelastic elastomeric materials using a new network alteration theory: Application to styrene-butadiene rubber”. Journal of the Mechanics and Physics of Solids, 2011, Impact Factor: 3.566, H index: 142, 59(2), pp. 473-495.

69. G. Ayoub, F. Zaïri, C. Fréderix, J.M. Gloaguen, M. Naït-Abdelaziz, R. Seguela, J.M. Lefebvre. “Effects of crystal content on the mechanical behaviour of polyethylene under finite strains: Experiments and constitutive modelling”. International Journal of Plasticity, 2011, Impact Factor: 5.502, H index: 115, 27(4), pp. 492-511.

70. G. Ayoub, M. Naït-abdelaziz, F. Zaïri, J.M. Gloaguen. “Multiaxial fatigue life prediction of rubber-like materials using the continuum damage mechanics approach”. Procedia Engineering, Impact Factor: 0.73, H index: 40, 2010, 2(1), pp. 985-993.

71. G. Ayoub, F. Zaïri, C. Fréderix, J.M. Gloaguen, M. Naït-Abdelaziz, R. Seguela, J.M. Lefebvre. “Modelling finite deformation stress-strain response during loadingunloading of polyethylene over a wide range of crystallinities”. Procedia Engineering, 2010, Impact Factor: 0.73, H index: 40, 2(1), pp. 977-984.

72. G. Ayoub, F. Zaïri, M. Naït-Abdelaziz, J.M. Gloaguen. “Modelling large deformation behaviour under loading-unloading of semicrystalline polymers: Application to a high density polyethylene”. International Journal of Plasticity, 2010, Impact Factor: 5.502, H index: 115, 26(3), pp. 329-347.

73. S. Belbachir, F. Zaïri, G. Ayoub, U. Maschke, M. Naït-Abdelaziz, J.M. Gloaguen, M. Benguediab, J.M. Lefebvre. “Modelling of photodegradation effect on elastic-viscoplastic behaviour of amorphous polylactic acid films”. Journal of the Mechanics and Physics of Solids, 2010, Impact Factor: 3.566, H index: 142, 58(2), pp. 241-255.

74. S. Belbachir, F. Zaïri, G. Ayoub, U. Maschke, M. Naït-Abdelaziz, J.M. Gloaguen, M. Benguediab, J.M. Lefebvre. “Experimental study of chemo-mechanical response of amorphous poly(lactic acid) films exposed to UV irradiation”. International Review of Physics, 2008, Pages 259-264.

Conference Publications

1.      T. Mungole, J. Zhang, B. Mansoor, G. Ayoub, D.P. Field. “Transmission Kikuchi diffraction from nano-crystalline Ti and TiN thin-films”. IOP Conference Series: Materials Science and Engineering, 2018, 375(1),012009.

2.      H. Lamnii, M.  Nait-Abdelaziz, G.  Ayoub, J.M.  Gloaguen, U.  Maschke, B.  Mansoor, “Effect of UV Ageing on the fatigue life of bulk polyethylene”. 12th International Fatigue Congress, FATIGUE 2018; Poitiers Futuroscope; France, Volume 165, 2018, 08002.

3.  M.A. Fakih, S.  Mustapha, J. Tarraf, G. Ayoub, R.  Hamade. “Detection and assessment of flaws in friction stir welded metallic plates”. Proceedings of SPIE - The International Society for Optical Engineering 10168,101682L.

4.  M.A. Fakih, S.  Mustapha, J. Tarraf, G. Ayoub, R.  Hamade. “Characterization of Lamb waves propagation behavior in Friction Stir Welded joints of dissimilar materials”. Structural Health Monitoring 2017: Real-Time Material State Awareness and Data-Driven Safety Assurance - Proceedings of the 11th International Workshop on Structural Health Monitoring, IWSHM 2017 1, pp. 55-62.

5.      A.K. Rodriguez, G. Ayoub, A.A. Benzerga. “Damage mechanisms at various strain rates and temperatures in AZ31B magnesium alloy”. Proceedings of the TMS Middle East - Mediterranean Materials Congress on Energy and Infrastructure Systems, MEMA 2015, pp. 243-247.

6.      B. Mansoor, A. Dorbane, G. Ayoub, A. Imad. “Friction stir welding of AZ31B magnesium alloy with 6061-T6 aluminum alloy: Influence of processing parameters on microstructure and mechanical properties”. TMS Annual Meeting 2015-January, pp. 259-266.

7.      T. Mungole, B. Mansoor, G. Ayoub, D.P. Field. “Evolution of microstructure and microtexture in a Cu/Ta multilayer during accumulative roll-bonding at high temperature”. Materials Science and Technology Conference and Exhibition 2015, MS and T 2015, 2, pp. 1503-1510.

8.      Z.G. El Chlouk, H.H. Achdjian, G. Ayoub, G. Kridli, R.F. Hamade, R.F. “The effect of tool geometry on material mixing during friction stir welding (FSW) of magnesium AZ31B welds”. Proceedings of the TMS Middle East - Mediterranean Materials Congress on Energy and Infrastructure Systems, MEMA 2015 pp. 235-242.

9.  A. Dorbane, G. Ayoub, B. Mansoor, R. Hamade, G. Kridli, A. Imad. “Mechanical response and evolution of damage of Al 6061-T6 under different strain rates and temperatures”.     Proceedings of the TMS Middle East - Mediterranean Materials Congress on Energy and Infrastructure Systems, MEMA 2015, pp. 259-265.

10.   E. Dogan,  M.W. Vaughan, I. Karaman, G. Proust, G. Ayoub, A.A. Benzerga. “Microstructural design of Mg alloys for lightweight structural applications”. Proceedings of the TMS Middle East - Mediterranean Materials Congress on Energy and Infrastructure Systems, MEMA 2015, pp. 225-233.

11.   T. Abovyan, G. Kridli, G. Ayoub, P. Friedman. “Formability prediction of Aluminum Sheet Alloys under Isothermal Forming Conditions”. Transactions of the North American Manufacturing Research Institution of SME 42(January), pp. 426-434.

12.   Z.G. El Chlouk, G. Ayoub, G. Kridli, R.H. Hamade. “Intermetallic compound formation in Al/Mg friction stir welded (FSW) butt joints”. ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) 2014.

Book/Book Chapters

1.      B. Mansoor, A. Dorbane, G. Ayoub, A. Imad. “Friction stir welding of AZ31B magnesium alloy with 6061-T6 aluminum alloy: Influence of processing parameters on microstructure and mechanical properties”. Friction Stir Welding and Processing VIII, pp. 259-266.

2.      G. Ayoub, M. Makki, A. Ilinich, G. T. Kridli. “Anisotropic Time-dependent Continuum Damage-coupled Plasticity Model for Predicting Ductile Fracture of 6xxx Series Aluminum Alloys”. Springer,  NUMISHEET 2022: Proceedings of the 12th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes.