CEEM245
Course Registration Instruction & Timetable Schedule
Semester March 2025 - July 2025
(20252 - Session 2 2024/2025)
Center of Mechanical Engineering
The "BORANG MENGEMASKINI PENDAFTARAN KURSUS" will start accepting request starting from 26 March 2025 (Wednesday) 12am.
Semester March 2025 - July 2025
(20252 - Session 2 2024/2025)
Center of Mechanical Engineering
NOTE: To relevant semester 6 students, if you still have not completed part 5 subjects please pick and register part 5 subjects (under group PEM2455A1 or PEM2455A2) first before adding part 6 subjects to fill-up your credit hours with part 6 subjects. Thank you for your cooperation.
The timetable provide below are for the convenient of the student when searching for classes. The information presented are correct up to the time the timetable were printed. For the most up to date information please refer to the official webpage https://icress.uitm.edu.my/timetable/search.asp .
The timetable shown here are correct during the time of printing. Any additional information regarding PKM courses please refer to UFUTURE platform and announcement made in UiTM Pulau Pinang PKM website (https://penang.uitm.edu.my/index.php/en/component/sppagebuilder?view=page&id=19).
Please bookmark this page for future reference.
Regarding Co-Curriculum course registration please follow instruction provided by HEP.
If you have problem regarding course registration please contact your academic advisor (PA). Below are some common registration problem that your PA can provide solution are:
allowing registration for classes with clash of timetable between two courses, (jadual waktu kuliah yang bertindih).
allowing student to drop a specific subject in current semester.
advising on study plan to your current situation.
If you encounter registration problem that limit the amount of credit hours you can register for the current semester. you must contact and meet the program head, Dr Ahmad Faiz. But before contacting the program head please speak to your PA first to get advice on you current situation.
If you still cannot solve your course registration problem after consulting your PA (the group you wanted to register is currently full) you can fill the online form "BORANG MENGEMASKINI PENDAFTARAN KURSUS BERMASALAH" provided below.
Special Announcement for New student from "LEPASAN DIPLOMA UiTM"
From "Lepasan Diploma UiTM" or other recognizable diploma program, you may be given some credit exemption for certain courses that you have taken during your diploma study. Follow the instruction provided by CEEM245 KP on how to do the credit exemption. There fore please do not perform any courses registration before your credit exemption process have completed.
How to Activate your UiTM Google Account:
Regarding registration of MEM698 Practical Training, only student that has completed their practical training during the semester break need to register this course.
On EET699 English Exit Test, the examination is not FREE, candidate need to pay a fee for taking this examination. For current semester, it is generally open to student currently in their final year of their study. About course registration and examination procedure and date, please follow the instruction announced by Akedamik Pengajian Bahasa (APB).
Additional information such as group lecture and WhatsApp group on courses offer by JSKM (mathematics and computer science courses), please go to this website for further detail, https://drive.google.com/file/d/11CRdy2FzxGCes3Ni5ORBuR4QWWj2y3xP/view?usp=sharing
Additional information such as group lecture and WhatsApp group on courses offer by APB (Akedamik Pengajian Bahasa), please read this document, https://docs.google.com/spreadsheets/d/1iZvPZF-dTQfM-rOIX8KmAm6n1jXop8qtmkQYF2bhuqE/edit
Additional information such as group lecture and WhatsApp group on courses offer by ACIS (CTU courses), please read this document, https://docs.google.com/spreadsheets/d/1iy8-lIFw8rNXsWgGSdnP6tOQCS0aVJ9pAnkEbJ1rTww/edit?usp=sharing
Additional information such as group lecture and WhatsApp group on courses offer by JPP (ENT600), please read this document, https://docs.google.com/spreadsheets/d/1h5UVzkH-IBAsQgT_n6aGiyGBtsVEa0ju/edit?usp=sharing&ouid=103537024168299718270&rtpof=true&sd=true
Additional information regarding faculty courses on WhatsApp/Telegram/Google Classroom link you can refer to here: https://docs.google.com/spreadsheets/d/1DcbNo1hdtg5pk0W1hUIGGPh2zY6Pw4rTnbhGPedBceI/edit?usp=sharing
Co-curriculum WhatsApp group links: Permatang Pauh : TBA👁️🗨️.......
WhatsApp group for EPE491: TBA👁️🗨️.......
Regarding the increasing the maximum number of student per group (group with full status), the process of opening more quota will only be done starting from the SECOND WEEK of the semester. But you should start attending the classes that you intended to register from the FIRST WEEK of academic session.
https://forms.gle/NGH9w1XVVPCiXwc6A
List of courses offer by Faculty of Mechanical Engineering UiTMCPP this semester are listed here. For courses offer by other departments please refer to individual timetable in iCRESS (https://icress.uitm.edu.my/timetable/search.asp) .
CEEM245
To get the latest class instruction and announcement by the lecturers please check the UFUTURE announcement and the instruction below by each class instructor.
Course open for registration, MEM401, MEM402, MEM403, MEM404, MAT435 and co-curriculum.
For CO-CURRICULUM I courses on offer please refer to HEP co-curriculum section. During the MDS week, you will be introduce to university co-curriculum .
Course open for registration MEM452, MEM462, MEM482, MEM491, CSC430, CTU552 and co curriculum.
For CO-CURRICULUM II courses offer this semester please refer to HEP co-curriculum department. If you encounter any problem regarding co-curriculum subject registration, please refer to HEP co-curriculum department.
Course open for registration MEM511, MEM512 and MEM591 plus a co-curriculum III.
If you need to register ELC501, EPE491 and MAT455 courses, you can try classes/groups offer for other faculty. If after consulting with your PA and you still cannot complete the course registration you can fill in the "BORANG MENGEMASKINI PENDAFTARAN KURSUS" in the link above.
In addition if you did not get credit exemption for CTU552 you will also need to register CTU552. (Only for student enter through UiTM Diploma).
Course open for registration; MEM581, MEM551, MEM582, MEM553, MEM550, MEM461 and MAT565.
Course open for registration, MEM604, MEM605, MEM562, MEM630, MEM561, STA408, EWC661 and TGC401 (third language German I).
Course open for registration, MEM670, MEM671, MEM681, MEM682, MEM685, CTU554 and TGC451 (third language German II).
NOTE: If you still have not finish PART 3, 4 and 5 subjects, you should plan your course registration by picking the earlier part subject first then complete your course registration by adding the later part subjects to fill your allow credit hours for this semester. Example if you still have subject in part 4 (MEM582) and part 5 (MEM605, MEM562, MEM630 and STA408), please register those subjects first then top up with part 6 subjects such as TGC451, MEM670 and MEM671). If you need help on your course registration please consult with your PA for further advise.
Pleas take note: Please do not register MEM698 (Industrial Training). You ONLY register MEM698 AFTER you have successfully completed your industrial training during the AUGUST to SEPTEMBER semester break.
Course open for registration, TGC501, MEM601, MEM686, MEM687, MEM688, MEM690, MEM697 (ELECTIVE 1), MEM698 INDUSTRIAL TRAINING, plus EET699 (NOTE 1).
If you cannot register MEM697 as your ELECTIVE 1, please contact your academic advisor (PA) to help with your registration for that particular course.
NOTE 1 : If you have not pass or taken your EET699 test in previous semester, for graduation purpose you need to register and sit for the EET699 (English Exit Test) to graduate. EET699 is open for student from PART 7 and PART 8.
Course open for registration, ENT600, elective II (MEM692 LEAN MANUFACTURING), elective III (MEM693 CNC TECHNOLOGY), MEM602, MEM698 INDUSTRIAL TRAINING, and EET699 (NOTE 1).
NOTE 1 : If you have not pass or taken your EET699 test in previous semester, for graduation purpose you need to register and sit for the EET699 (English Exit Test) to graduate. EET699 is open for student from PART 7 and PART 8.
EM241
To get the latest class instruction and announcement by the lecturers please check the UFUTURE announcement and the instruction below by each class instructor.
Courses open for registration are, MEM602 FINAL YEAR PROJECT.
NOTE 1 : If you have not pass or taken your EET699 test in previous semester, for graduation purpose you need to register and sit for the EET699 (English Exit Test) to graduate. EET699 is open for student from PART 7 and PART 8.
Register MEM698 (Industrial Training) ONLY AFTER you have successfully completed your industrial training during the semester break.