Appendix H: Instructions for Use

Instructions for using the Oximatic

The following are the steps to follow when using the Oximatic.

Initial Setup

1. Run the tubing from the oxygen concentrator through the bottom funnel. (Figure H1)

2. Place the tubing in between the groove of the wheels. (Figure H2)

3. Feed the tubing out from the upper funnel. (Figure H3)

Spooling

1. To spool the tubing, flip the switch to the down position to begin winding up the tubing. (Figure H4)

2. Once the tubing has been spooled to the appropriate length, flip the switch back to the center position. (Figure H5)

Unspooling

1. To unspool the tubing, flip the switch to the up position to begin letting out the tubing. (Figure H6)

2. Once the tubing has been spooled to the appropriate length, flip the switch back to the center position. (Figure H5)