For this project we used clay and formed it into the shape of a bowl, and we put our designs on it. Then we glazed the bowls and fired them. I liked this project because I like to work with clay.
For this project we took clay and made it into the shape of a plate. Then we glazed the plates and traced a design on them. After that we used a knife to scrape all the clay out inside the design. I liked this project because it was fun to use the knife to scrape out the clay and to make a cool design.
For this project we started by cutting out the shape with foam board. Then we connected them with cardboard and construction paper. After that we used brown paper and paper mache to cover the surface. Last we painted over it and glued pictures on it. I enjoyed this project because it was simple and we could do whatever we wanted for it.
For this project we started with clay and shaped it into an animal, then we added details to it. Then we painted them. This project was fun to do but it took a lot of time.
For this project, we started with a block of foam and trimmed it down with a bandsaw to the right shape. Then we shaved it down to add details and painted it. I liked this project because it was fun to use the different tools.
For this project we used a pottery wheel to make a bowl and Mug out of clay. It was cool to learn how to use a pottery wheel. We also glazed them to give them color.
For this project we started by figuring out how big we wanted to make the jar. Then we measured out how big the base would be and made it out of clay. Then we used coils to build it into the shape we wanted. This project was fun because we got to use clay, but it was hard.
For this project we started with a piece of wood and drilled holes in it. Then we put reeds in the holes and used wood glue so it stayed. After that we drilled a hole all the way through the wood for a light to go in. Then we glued tissue paper on the outside and put starch on it. This was a fun project because we got to use a drill and it was not hard to do.