I had tired to make a box head but the hot glued started to fall off for I reason I do not know. But still wanting to try to make a one that works so for halloween I wanted to make a oc of my named Rachel. I made her in 4th grade and she was based on weird core. I used a pen to mark out where i wanted everything to be as I wanted everything to be as straight as plausible. There I drew the eyeslise which at least took a good 40 minutes to a hour. I made a head holder by cutting up stipes and marking where they were tied nicely around my head. I made a headband for the bottom part of my head and the top part as well as putting to holders in between the top and bottom one so they would not move. I had to add and remove so of the headband as I needed room for my nose and it felt so uncomtable to wear without the room. I then made the nurse hat and hot glued it to the back of the head. I then sketch out one wing and then traced it to a piece of cardboard. I started to move the cardboard on the lines inside so if it could the wings could move but I needed to make the wings stay still so I cut out 2 stipes of cardboard and hot glued a tip of one side to the middle of the wings and the other tip to the back side of the eye. I then added the finally cardboard details to it. I cut a hole in the pupil of it and cut up a tights and used it to make a area where I could see. I will recommend if you are going to use tights you should stretch the tight as far as they will go as it will make it easier to see out of it when ware. I then went over to a friends house and we used her dads paints to make it the way it is now and as a last minute decision I decided to make the goss on it grow in the dark but it didn't really work sadly. I might make a tutorial on how to make the back piece and how I did it but we will wait and see.