3D Modeling

This is my 3D modeling folder. In this folder I will showing my projects that are 3D like my Modern art and Sketch up folders. I also use Blender to make my projects look more realistic. I use Blender to make animations and more.

This is my 3D full painted house that I made in Sketch up for schools then I put it in Blender to make animations. This also took me about 2 months! So this takes a while to make,perfect, and check if everything is good.

250219 House Spin 10 Second Jayden Aguilar0001-0300.mp4

This is my Modern Art project 1. It took me a week to make. I started by going into Sketch up. I made a nonagon with the hexagon tool. You may be like "How did you make a nonagon with the hexagon tool?!" Well I made the hexagon then I typed in 9 to make it have 9 sides. Then I offseted the nonagon to make a nonagon in a nonagon. Finally I put lines in a staircase like pattern the I used the push/pull tool to pull it out. Next I used the paint bucket tool to give it color.

This is my 3D house. This took me very very long to make. Not just to animate but I had to make this in Sketch Up. I had to color this, make it, push pull it, and many more stuff. This was very hard to make because I had to use specific measurements.

This is my Modern art 1 with color. What's cool about this is from the side angle it looks mainly white. But from the top it looks blue you can see that from the photo above this. I did this by leaving the side of the stairs white and painting the top of the stairs blue.

250305 Jayden Aguilar Modern Art 1 spin 10 second video0001-0300.mp4

This is my Modern Art 10 second rotation video. This was very hard because of the keyframes we had to do and the camra angles we had to do. This took about 5-6 weeks to make.

This is my FUNHOUSE that I created without any videos to watch. So basically I just winged it. So before I started I saved my other painted house. Then I made a DUPLICATE of the painted house. Then I started editing the duplicate and NOT the original. As you can see I made a front yard, a walkway, a hot tub, a sandpit and a fence. so the way I mad the yard was that I made a big rectangle with the rectangle tool of course. The way I made the fence was that I made a square then I used the push/pull tool to pull up the square for the fence pole. then I kept doing that for the rest then I made a circle on the farthest fence pole from the house. Next I used the push/pull tool to pull the circle through the fence posts on both sides. I made the pathway by using the line tool to put a straight line on both sides of the door. Then I pulled the other sides to make look like grass. I made the sand pit by making a square then pulling it up. Then I offseted it the I colored it to make the inside look like sand. Finally I made the hot tub by making a circle, I pulled it up, I offseted it then made the inside look like water. Finally I made sure everything was colored the did final touches to make it perfect!

Page updated

Report abuse