Abstract Submitted

THERMAL MODELING OF CARTRIDGE TAPERED ROLLER BEARING UNDER EXCESSIVE SLIDING CONDITIONS USING FINITE ELEMENT ANALYSIS

A Review On Fault Detection, Diagnosis And Prognosis, In Vibration Measurement Through Wavelets On Machine Elements

PREDICTION AND OPTIMIZATION OF PROCESS PARAMETERS IN TURNING OF AA6063 ALLOY USING ANN

The Smart Vehicle Concept

Rigid Logged Coupling:An improved coupling with less material and low stress concentration

Vibration Analysis of Aluminium Alloy 5083 Reinforced Nanoclay (MMT-K10) Composites

Aluminium Nano composite based redundant articulated robot with multi tool end effector.

Optimization of wire offset in WEDM of AISI D3 steel by Taguchi method

"MULTI-RESPONSE OPTIMIZATION OF INCONEL 825 PROCESS

PARAMETERS USING LN 2 COOLED ZINC COATED BRASS WIRE IN CNC WIRE-CUT EDM"

MANUFACTURE AND TESTING OF ALUMINIUM MATRIX COMPOSITE REINFORCED WITH IRON

A Study On Investigation Of Mechanical Properties Of Aloevera Fiber Reinforced Epoxy Composites

Design and Structural analysis of Propeller shaft made of Natural fibre reinforced polymer composites using Finite Element Analysis

Design and Development of Heat Exchanger with Curved Tubes

Numerical Analysis of Heated Square and Circular Geometries Arranged in Tandem

Comparative study of ball nose and flat end milling processes on A356 alloy/SiCp metal matrix composite

Influence of Graphite Particles on Microhardness and Microstructural Behaviour of AA7068 Metal Matrix Composites processed by Powder Metallurgy

THE STUDY OF METAL MATRIX COMPOSITE BY USING STIR CASTINGMETHOD

Studies of Relative Motion in a Cartosat-2C Mission with Clohessy-Wiltshire Equation

INFLUENCE OF RARE EARTH ELEMENTS IN MAGNESIUM ALLOY – A REVIEW

DESIGN, ANALYSIS AND OPTIMIZATION OF IC ENGINE PISTON HEAD PROFILE

Microhardness and Microstructural Behaviour of AA7068/SiC Metal Matrix Composites synthesized by Powder Metallurgy

Influence of Stacking Sequence on Wear Characteristics of Epoxy based Flax/Sisal Composite Laminates

Influence of Fiber Orientation on Mechanical Properties and Vibration Characteristics of Glass/Hemp Hybrid Composite Beams

Exploration of Buoyancy based Ride Model using Hydrostatic behaviour of Two Different Fluids

Effect of Process Parameters in Electric Discharge Machining of AZ31 Magnesium Alloy

Optimization of process parameters for drilling of Inconel alloy 625

Design and Thermal Hydraulic Analysis of Square Cylinder with Variety of Protrusions on Rear Side

Fatigue analysis of vocal-folds using discretised aeroelastic model

DESIGN AND FABRICATION OF OCTOPOD

Design and Thermal Performance Analysis on Solar Still

Design of finned Spherical Enclosures and thermal performance evaluation under natural convection

Numerical Modeling of Orthogonal Machining Process using Smoothed Particle Hydrodynamics - A parametric study

INFLUENCE ON MACHINABILITY AND FORM TOLERANCE DEVIATION OF INCONEL 718 SUPERALLOY IN DIE SINKING EDM USING DIFFERENT DIA. MULTI-HOLE Cu ELECTRODES

ANALYSIS OF AERODYNAMIC DRAG REDUCTION OF PASSENGER VEHICLE

Machining characteristics of AISI H-11 Tool Steel with varying hardness by different processing techniques

Optimization of Laser Trepanning Parameters for Mild Steel by Taguchi Response Surface Methodology (T-RSM)

EVALUATION OF ERGONOMICS ISSUES IN REPETITIVE SCRAP HANDLING WORK IN AUTOMOBILE INDUSTRIES

Influence of solid lubricants on the Mechanical and Tribological behavior over PEEK polymer

Switched Staircase Type Multilevel Inverter Structure With Reduced Number of Switches

Hydro Pneumatic Parking brake actuation system for Motor grader application

EFFECT OF ABRASIVE WEAR PROPERTIES OF A356\TiB2 COMPOSITES

Achieving optimal process parameters during Milling of Jute Fiber Reinforced Composite Using Ant Colony Algorithm

Aeroelastic phenomena involve the dynamic interaction between inertia, structural and aerodynamic forces of a fluid-structural system —specifically, an airfoil in the presence of a fluid flow.

The response of layered composite beam subjected to static loading using the point interpolation method

Reduction of Terminal Rejections and Failure Cost through Kaizen at Shop Floor of a Wire Harness Manufacturing Company

Optimization of process parameter in abrasive water jet

Machining of blue fired grain reinforced glass fiber polymer composite

Dynamic Behaviour of Laminated Composite Beam Undergoing Moving Loads

Fifth Wheel Coupling-failure modes and alternate design strategies

AE based girding wheel sharpness monitoring using machine learning classifier

Effect of punch force on the upsetting deformation process using three-dimensional finite element analysis

Wear behavior of aluminium thin films under extreme loads

Micro-structure based Damage Analysis on Nanoparticles Dispersed Polymer Matrix Composites

Mechanical Behaviors of Raavi and Pineapple fibre - Reinforced Hybrid Polyester Composites

Design and optimization of feature primitive model of internal architectures: cortical bone tissue engineering applications

Solving the flexible job shop scheduling problem using a hybrid artificial bee colony algorithm

Reduction of Terminal Rejections and Failure Cost through Kaizen at Shop Floor of a Wire Harness Manufacturing Company

Metallurgical and Wear Behaviour of Stellite 6 reinforced Stainless Steel 316 joints by Nd-YAG Laser Welding Process

Enhancement of Wear and Material Properties of Stellite 6 Coated Chrome Moly Steel by Laser Cladding Process

Enhancement of Material Properties on Chrome Moly Steel Alloy by Liquid Nitriding Process

Analysis of a Wire Rope Isolator for Vibration Isolation in a Goods Transport Vehicle

FREE VIBRATION ANALYSIS OF FUNCTIONALLY GRADED BEAM WITH LINEARLY VARYING THICKNESS

Efficient Dispatching Rules for minimizing Flow time and Tardiness Based Performance Measures in a Job Shop Scheduling

Turning process characteristics of aluminium matrix hybrid composite using Grey Relational Surface Methodology

AN ANALYTICAL STUDY TO COMPARE THE EFFICACY OF SOLENOID CORE DESIGNS IN MAGNETO-RHEOLOGICAL FLUID BRAKE SYSTEM USING COMSOL MULTIPHYSICS

The smart vehicle concept

Design and Development of modular parallel XY manipulator

Engine Testing Workflow Analysis through Value Stream Mapping and Simulation

AN ANALYTICAL STUDY TO COMPARE THE EFFICACY OF SOLENOID CORE An Efficient Grey Water Stagnancy Handler

A Review Processes Parameter & Optimization in Nd: YAG Laser Micro drilling on Titanium & Alloy Ti-6Al-4V

Carbon Fiber - The Platform for Energy Storage in Batteries: A Review

Carbon Fiber Surface Treatment for Enhanced Interfacial Properties: A Review

The Effect Of Silane Treated TiO2 Nanoparticles On The Thermal Performance Of Polymer Composites

Effect of surface porosity on the stiffness property of the dental implant

Dynamic Behaviour of Laminated Composite Beam Undergoing Moving Loads

Corrosion behaviour of hot-rolled aluminium 8015-alloy in natural sea water at 1.37 µm surface roughness

Demystifying fractal analysis in thin films: A reference for thin film deposition processes

Preparation and Characterisation of Tire Rubber filled Particle board

Design of hyper-redundant in-vivo robot: A Review

Linear programming in market management using artificial intelligence

Development of dual blade vertical axis wind turbine for power generation

Effects of Coolant Type on Sustainable Surface Grinding of Ti-6Al-4V

A Review on Performance Influencing Parameters of Solar Still.

Grey Relational Analysis of Pine Apple Leaf Fiber (Palf) & Granite Powder Reinforced Hybrid Polyester Composites

ANALYTICAL INVESTIGATION OF AXIAL AND BENDING STIFFNESS OF WOODS AS AN ANISOTROPIC MATERIAL FOR STRUCTURAL BUILDING COMPONENTS

Mathematical Analysis of Stiffness of Orthotropic Beam with Hollow Circular and Rectangular Cross Sections

ANALYTICAL INVESTIGATION OF THE STIFFNESS OF HOMOGENOUS ISOTROPIC MECHANICAL MATERIALS WITH DIFFERENT CROSS SECTIONS

DYNAMIC ANALYSIS OF RECTANGULAR ALUMINIUM PLATE UNDER TRANSVERSE LOADING USING FINITE DIFFERENCE ALGORITHM

Utilization of 3D Printer into Development of Affordable and Functional Artificial Limb

Parametric optimization of Cracked Cantilever Beam using Genetic Algorithm

Preparation and mechanical property analysis of polymer matrix composite containing rice husk and saw dust

A Review on Performance Influencing Parameters of Solar Still.

Experimental investigation of Heat treatment processes on dissimilar IS2602-EN9 MIG welded joint

NATURAL FIBER IMPREGNATED RUBBER: An OVERVIEW

EXPERIMENTAL INVESTIGATION IN DIESEL ENGINE BY USING PYROLYTIC OIL

A comparison of dispersion methods on the interfacial reactions, dispersion characteristics and structural integrity of MWCNT in Ti6Al4V

Experimental Investigation and Optimization of Response Parameters in Cylindrical Grinding of EN24 Steel using Artificial Neural Network and Grey Relational Analysis

Design and Fabrication of Emergency Drone Recovery System

Influence Of Fly Ash Particles On Surface Roughness And Friction Coefficient Of Magnesium Metal Composites

Influence of Alumina Addition on the Densification Behaviour and

Microhardness of Al2O3-Ti6Al4V Composites

Parametric study of Composite Plate using Free Vibration Analysis

Free vibration analysis of Hybrid composite beam under Thermal gradient Loading

A COMPUTATIONAL STUDY ON THE EFFECT OF SUPERCRITICAL CO2 IN A COMBUSTOR

Tensile, Hardness and Impact Properties of Amorphous Al-Si-Mg Cast Alloys

QUEUING THEORY AN INDEX FACTOR FOR PRODUCTION INVENTORY CONTROL IN AUTOMOTIVE INDUSTRY – A REVIEW

Investigation of Eucalyptus with Additives as a Fuel for Diesel Engine

Investigation of the Mechanical Properties of Polyamide 6 Nano Composites with MWCNT and Copper Nano Particles

A COMPUTATIONAL STUDY ON THE EFFECT OF SUPERCRITICAL CO2 IN A COMBUSTOR

Experimental study of an axial turbine for wave energy conversion

Analysis of Corrosion Control in Domestic Water Geysers by coating Nano Film using Thermal Spray Coating

EFFECT OF MULTI-WALLED CARBON NANOTUBES ADDITIONS ON ITS DISPERSION CHARACTERISTICS IN METAL OXIDES

INVESTIGATIONS INTO NONLINEAR ENERGY SINKS FOR A STOCHASTIC DYNAMICAL OSCILLATOR

INFLUENCE OF CARBON NANO-PARTICLES IN GFRP UNDER DYNAMIC LOADING CONDITIONS AT AN ELEVATED TEMPERATURE.

Enhancing the mechanical properties of hypereutectic Al-Si sand cast alloy using Submerged Gating System

Utilization of Piezoelectric base composite materials for the manufacture of unmanned Ariel vehicles: An overview

A study on different properties of biochar based nano-composites for practical applications

Performance study of dissimilar metal joints of SS 321 and SS 347 under MIG welding process

Experimental Investigation on the Influence of Tool Geometry in Minimum Chip Thickness of Micro End Milling Using Cutting Force Analysis

Global Sensitivity Analysis of Laminated Composite Structure: Review of concepts, methods, theoretical framework, and applications

Experimental Investigation of water with biodiesel as an emulsified fuel in C.I Engine.

EXPERIMENTAL EVALUATION ON JOINING OF AA6061 AND AISI1010 BY FRICTION WELDING

Effects of Processing Parameters on High Strength Aluminium Alloy 7075 used in Friction Stir Processing and Welding – A Review and a Case Study

Preparation, Characterization, Image Segmentation and Particle Size Analysis of Cow Bone Nano-particle for composite applications

DEVELOPMENT AND PERFORMANCE EVALUATION OF A HOUSEHOLD MANUALLY OPERATED CITRUS JUICE EXTRACTOR

Experimental Design and Testing of Scale Development Reduction System for Domestic Water Geysers

Multi Objective Optimization and Numerical Modelling of Helical Coil Spring for Automotive Application

Stainless Steel based on Its Super-Alloys AISI 304 and AISI 316 Cutting Processes Parameter using CO2 Laser- Review

Experimental investigations on machining force during turning of AZ91D Magnesium alloy using PCBN tools

A NOVEL BANANA LEAF WASTE BASED ACTIVATED CARBON FOR AUTOMOBILE EMISSION CONTROL

Heat Transfer to Peristaltic Transport in a Vertical Porous Tube

Analysis of Multiwalled Carbon Nanotube using Nanotube Modeller

Finite Element Modelling of a Compression test of AISI 1016 Steel: A Review

Evaluation of Process parameters influence on the mechanical properties of TiC thin film Coating

Temperature and Power effect on the morphology and structural properties of TiC thin film grown by RF magnetron sputtering

Finite Element Analysis of a Simulated Steel Billet from Square to Oval Section during the Hot-rolling Process

ZrB2 influences on the Dry Sliding Wear Resistance of AA7075 alloy

Design of Facilities that Incorporates Relationship between Supermarket Layout and its Sales

Design and performance analysis of mullite to improve heat dissipation in portable computers

Determination of optimum scheduling rules in a Flexible manufacturing system

Experimental investigations on Surface roughness during turning of AZ91D Magnesium alloy using PCBN tools

Numerical study of Functionally Graded Materials for the dental implant

Numerical Analysis on a Direct Mechanical Drive Wave Energy Converter to Improve Performance on Higher Wave Periods

Design and Development of Magnesium Metal Matrix Surface Composite by Friction Stir Processing for Implant Applications

TRANSIENT ANALYSIS OF ROTOR SYSTEM

Application of Six Sigma Methodology to Redesign the Pediatric Health Care System

Design, Fabrication and numerical analysis of a spar platform for a point absorber wave energy convertor

Experimental and Numerical analysis of PTO damping for a point absorber wave energy Converter

Design, Development and Optimization of Asymmetric Spur Gear Drives

A REVIEW ON NON-STANDARD SPUR GEAR

A Study of Tidal Turbine Modelling For Efficient Energy Generation to Indian Coastal Lines

Effect of Divergent Tool Geometries in Drilling Holes in MMCs via Electric Discharge Drilling

TIE WING DEFORMATION OF ORTHODONTIC BRACKET - A FINITE ELEMENT ANALYSIS

Experimental investigations on Machining force during drilling of AZ91D Magnesium Alloy

An Experimental Study on Sisal/Hemp Fiber Reinforced Hybrid Composites

Experimental Studies on Solid Particle Erosion of plasma Sprayed TiO2 on Martensitic Steel

Numerical Simulation of Flow over a Racing Motorbike using OpenFOAM

Comparison of hydrogen yield from ball milled and unmilled magnesium hydride in a batch system hydrogen reactor

Kinematic Analysis and Simulation of a 6DOF Welding Robot

Design and Experimental Analysis of Carved Wheeled Robot Movement on Uneven Terrain and Stair-case

Design and Analysis of Self-Transformable Wheel Robot

A REVIEW ON THE SYNTHESIS OF ACTIVATED CARBON FROM NATURAL RESOURCES FOR MECHANICAL APPLICATIONS

Fabrication and Testing of natural fibre reinforced composite materials

Investigation on Chemical Isolation and characterization

of Cellulose from Delonix Regia Fruit fibers

Investigation on Wear properties of Nickel coated Al2O3P

Reinforced AA-7075 Metal Matrix Composites

Computational analysis of internally mounted rheological fluid damper on tool vibration during boring process

A finite element analysis to study the effect of various loading conditions on the intervertebral disc in L4-L5 section of lumbar spine

PRODUCTIVITY IMPROVEMENT USING WORKSTUDY AND LEAN APPROACH

Study and analysis of reinforcement parameters on thermal conductivity of Megnisium/soda-lime glass composites though Taguchi’s orthogonal array approach

Multi-Response Optimization of Reinforcement Parameters of LM6 Alloy /Soda-Lime Glass Powder Composites through Taguchi Method and Grey Relational Analysis

Combined casing groove and blade tip treatment for wave energy harvesting turbine

Design of Shell-and-Tube Heat Exchanger with CFD Analysis

A Critical Review on Optimization of Shell-and-Tube Heat Exchanger

Assessment of Turbulence Models on a Backward Facing Step Flow Using OpenFOAM

Design and Development of Wind Tunnel to Study Smoldering Combustion

An investigation on the effect of heat treatment on the tribological properties of Al2014

DESIGN AND DEVELOPMENT OF ABLATIVE NANO COMPOSITE TESTING FOR CARBON PHENOLIC BY VARYING THE HEAT FLUX

A Biomechanical study of lumbarization in a spine

An Iterative Technique to Solve Nonlinear Volterra Fuzzy Delay Integro-Differential Equations

Characterization of Rayleigh-Taylor Instability at the Fluid-Fluid interface

Effect of compaction loads in machining of short carbon fiber reinforced aluminium composite

Design and development of ablative nano composite testing for carbon phenolic by varying the heat flux.

HYDRODYNAMIC STUDY OF SINGLE PHASE AND TWO PHASE TURBULENT FLOWIN A 3-D 90 DEGREE BEND PIPE

EFFECT OF INSERTION FORCE FOR SUCCESSFUL PENETRATION OF MICRONEEDLE INTO THE SKIN

Effect of temperature on the surface characteristics of anodized aluminium tubes

Numerical Simulation of a Small-Scale Shock Tube Using OpenFOAM®

Numerical Simulation of a Small-Scale Shock Tube Using OpenFOAM®

Analysis of Entropy Generation with Thermal Radiation on MHD Carreau fluid flow past a Wedge

CONTACT STRESS ANALYSIS ON A FUNCTIONALLY GRADED SPUR GEAR USING FINITE ELEMENT ANALYSIS

Heat and mass transfer analysis of Al2O3 and Cu-water nanofluids over linear stretching surface with thermo-diffusion using artificial neural network

INVESTIGATING THE CONTACT LOAD CAPACITY OF ASYMMETRIC

HELICAL GEARS

Dry slide wear Performance of Red Mud Reinforced Al-8011 Metal Matrix Composites

Analysis of Transient Heat Conduction on a flat plate

Synthesis and Characterization of Al 7072-Al2O3 Metal Matrix Composites

Chatter Mitigation in Boring Bar Tool Using Particle Impact Damping

Elongation of Fuel Prediction based on Distance with Odometer

C4–C5 segment finite element model development and investigation of intervertebral disc behaviour

A STUDY OF MATHEMATICAL MODEL FOR PERISHABLE RESOURCE MANAGEMENT UNDER FUZZY ENVIRONMENTS

Tribological Optimization of UHMWPE Polymer Nanocomposites for hip joint prosthesis - an Artificial Intelligence based Approach

DESIGN AND DEVELOPMENT OF ABLATIVE NANO COMPOSITE TESTING

EXPERIMENTAL INVESTIGATION OF HEAT TRANSFER IN A PULSATILE FLOW LUBRICATION SYSTEM FOR TURNING PROCESS.

Heat Treatment and Finite Element Analysis of MONEL 400 super alloy for Gas turbine Applications

Design of Macro rough surface and its influence on bottom heated square enclosure

EXPERIMENTAL STUDY AND ANALYSIS OF DEFRAGMENTED CARBON NANOTUBES IN POLYACRYLONITRILE MATRIX

An overview of EDM Operation on Hybrid MMCs

DESIGN AND FABRICATION OF CAR DOOR PANEL USING NATURAL FIBER REINFORCED POLYMER COMPOSITES

Tribological study of ultrasonically assisted nano alumina reinforced Ni-B coatings

NVH Analysis and Application of Natural Biodegradable Material in Auto-rickshaw: A Study

Influence of Metallic Chills on the Slurry Erosive Wear Behavior of Chill Cast

Al-B4C Composites

Coordinated Two-Echelon Inventory Model for Optimal Cycle Time and Inventory Decisions in a Cubic Price Dependent Demand Rate under Credit Period

Modification to Metal Matrix Composites Designation System

Combined effect of radius ratio and flow pulsation on the performance of a double pipe heat exchanger

Effect of wavy geometry on the performance of the double pipe heat exchanger

Improving the Load Carrying Capacity through Asymmetric Spur Gear using WC-Fe Metal Matrix Composite for Automobile Applications

Recent Advances for Spacecraft Attitude Dynamics by using a Quaternion Variational Integrators

Close-Proximity Dynamic Operations of Spacecraft with Angles-Only

Rendezvous in a Circular Phasing Orbit