Get a piece of plain white paper - FOLD IT IN HALF!

On one of the outside sides of the fold, draw a picture of something that you are interested in (logo, design, image, etc.)

Color picture

Locate where you want to put your LED lights

Draw dots for lights on the back of the picture (inside the flap)

On your image, locate where you want your push button to go

On the same side as the light dots, draw a circle with a negative sign inside (inside flap behind your picture)

On the opposite flap (where the negative battery symbol touches) place a positive battery symbol

Draw a rough sketch of where your copper tape will be placed - Follow this diagram as a guide...

Place the copper tape following the guide that you drew - keep in mind that the tape should lay across the battery symbols and should have a space or "break" where the LED light will be placed

Punch the LED lights through the front flap of the paper from the outside where the picture is located

Bend the short LED prong to the tape touching the negative battery symbol

Bend the long LED prong to the tape touching the positive battery symbol

Tape each LED prong to the correct side using copper tape

Place the positive side of the battery (smooth side) to the positive battery symbol

Tape the battery down using scotch tape - follow the following guidelines to tape your battery to the paper - DO NOT place the tape in the middle of the battery

Close the paper at the fold so that you can see the picture and the LED lights - press in the area where the battery is located

When pressed, the LED lights should light up - if not backtrack through the steps to ensure that you followed them correctly