Embedded Files
Pictures of Inventory
Attaching the Rack and Pinion
Front View
Back View
Assembling and Adding Thread Sealant to the Front Main Cylinder
Master Cylinder without the Reservoir and Lines
Applying Thread Sealant to the Master Cylinder Reservoir
Finished Master Cylinder
Attaching the Reservoir
Putting the Cylinders onto the Frame (Failed Attempt due to Paint)
Failed Cylinder Install Attempt
Fixing the Issue and Re-installing
After the Cylinder is Installed
Re-installing the Cylinder
Installing the Brake Cluster (Failed) and Installing the Pedals
Brake Cluster Attached Back View (Failed Attatchment)
Brake Cluster Attatched Side View
Brake Cluster Attatched Front View
Pedals Before Attatchment
Brake Cluster Attatched Top View
Close Up of the Brake Cluster with Pedal Plungers
Installing the Hall Effect and the Brake Cluster Properly
Front View of Pedals and Hall Effect Attached
Attaching the Hall Effect Side View
Back View (Easily see the Correct Brake Cluster Attachment)
Attaching the Hall Effect Back View
Attaching the Hall Effect Side View
Attaching the Hall Effect Back View
Putting Zip Ties on the Brake Lines to Keep them in Place
And Switching the Two Brake Lines that were on the Wrong Sides
Zipe Tie in the Back
Two Brake Lines Switched to Reach the Wheels
Zip Tie in the Front
View of the Brake Cluster After Zip Ties were Added
Reading Instructions and Holding Parts
Zip Tie on the Side
View of the Brake Cluster after Zip Ties were Added
Brake Bleeding
Brake Bleeding
Pumping the Brakes Manually
Pumping the Brakes with the Pedals
Page updated
Report abuse