Welcome!

The library is open every day before school (7:45-8:20), after school on Weds & Thurs (til 3:00), and at break and lunch. 

You may check out two books at a time. Graphic novels and Manga can be checked out for one week. All other books can be checked out for two weeks.

If you can't find a book in the catalog (see 'search for a book' in the menu above), try Sora which can be accessed through your Clever account.    

3D Printing Instructions

Email jpatrone@slusd.us to sign up! 

Then, if you have a computer, follow the directions below:

Selecting Your 3D Model (Day One)
1) Go to Tinkercad.com  
2)  Click on the ‘G’ for Google and sign in with your school email.

3) Register. You don’t have to use your real birthday.

4) Use the Magnifying Glass icon in the top right corner. Type PENDANT.

5) Pick a design that is ONE piece - click on it
6) Chose ‘Download’ as an .stl file

7) Email your .stl file to jpatrone@slusd.us. Choose the paperclip at the bottom of your message, go to Downloads, and click on your .stl file

Printing Your 3D Model (Day Two)
8) On the 3D Desktop, open Print Studio and Import your file (blue plus sign)               9) Choose ‘Scale to Fit’ and then decrease scale to 60%
10) Follow path (‘auto repair’ as needed)
11) Rename file (G3yourname) and save back onto jump drive
12) Make sure there is enough filament loaded (should be at least 1” deep) 13)Prepare the printer with blue tape and glue.
14) Print! (these pendants should be done in 30 minutes or less)

3D Sign ups for 11/21. Make sure you have emailed jpatrone@slusd.us AND included a design! (steps 1-7 above)

1.  Deremaya

2.  Fernando

3. Parker

4.   

5.