Here's a small program, (written in C) to generate the EPROM contents for an RT85. This program is ONLY for the "Low band" RT85, NOT the RT85A or B or C. It may be vaguely relevant to these other models: I don't know, as I have only the one radio to play with.
This program is "a work currently in progress". I have got both the receiver and transmitter VCOs "on frequency" and the receiver scans through up to 32 channels. There are probably a few things the program should do (but doesn't). It seems to work.
On my radio, I unsoldered the EPROM, installed a "machined pin" socket, unsoldered the "strip" connectors and resoldered them so they were raised from the board a couple of mm. I can now program the 2716 in a standard programmer.
The last entry must finish with a "return" (just press "Enter" or "Return")
Each entry contains the channel number, receive frequency in KHz and transmit frequency in KHz.
The last entry must finish with a "return" (just press "Enter" or "Return")