In urban conditions, conditions of a private plot or a garden and park zone, artificial removal of trees are necessary. No one needs a sick tree to fall on a power line, break windows in a neighbouring house or crush a nearby car. In this regard, the felling of trees takes place in compliance with certain rules.
Deleting the entire tree
This option is possible if the tree has a natural slope, and there is enough free space for a painless fall. Most likely, you will not need to involve sophisticated equipment, a team of Tree Trimming Beverly Hills - industrial climbers, and other measures. Unfortunately, this case is rather an exception. Much more often we have to come up with other ways.
Removing the entire tree with guide rods
Felling a tree entirely with guide rods is convenient for use in limited areas, but where it is possible to choose the trajectory of its fall. The process takes place with the involvement of climbers, whose task is to fix the guy-rope in the upper part of the crown of the tree. In the trunk from the side into which the tree should fall, a wedge is cut out and an inscription is made from the opposite side. Thus, the tree begins to fall, and the whole process is controlled by a drawbar, which can be fixed, for example, on a winch.
Removal of the tree in parts with dropping or with the descent of parts.
The removal of a tree by climbers using rope railings is used if at least two strong trees grow nearby, between which ropes can be stretched, and the sawn tree is laid on such "railings". In the future, by analogy with the drawback, the tree can be laid on the ground or disassembled in a hanging state.
Before the landscaping of the site, there is often a need to cut down dry trees. Such work is also carried out on the territory with Tree Removal Brentwood if an emergency object is detected.
The execution of works by experienced craftsmen is:
• compliance with safety regulations;
• no risk of damage to wires and communications;
• whole flower beds and lawns;
• a clean playground – without stumps and splinters.
Before performing the work, the arborist examines the tree plantations that need to be removed, as well as the territory, and selects the appropriate method and technical means. You can order the cutting of large-sized trees and shrubs, and the removal of stumps in an undeveloped area, near buildings, or on a landscaped plot.
Depending on the situation, the work is performed in one of the following ways:
• without dividing the trunk into parts – in free spacious territories;
• separate elements without hanging – if there is a free space at the bottom;
• With hanging – near the building, above the roofs, gazebos.
Stumps are removed using a winch or special equipment, felling waste is loaded onto transport and exported. The price for standard operations can be viewed on the website. The total amount is calculated separately for each order, taking into account the height and diameter of the barrel, the method of removal, and volume.