Setup TP Link Wifi Extender

    1. Plug Your Tplink Range extender to a Power Saver near to your Wireless Router. Power it on then wait for 20 seconds for it to Boot up & so the lights on Repeater Can Go Solid. Tip- if you are utilizing a Smartphone Or Tablet to setup tp link Range extender then flip the wifi on your own apparatus. In the event when you using a laptop Please disconnect some ethernet Cable Connected for it & make sure the wireless is switched to Laptop.

    2. You Should be Able to See a New Unsecured Tp-Link Network, Please Join with This

    3. It Must Automatically Take you to tplinkrepeater.net For Configuration Or You can also Manually Open Browser and type 192.168.0.254 or tplinkrepeater.net than Press Enter.

  1. Setup Page Will Present Itself and can request Default Username & Password to TP Link Extender. Please Form admin To Get Username & Password Both.

  2. Follow the Onscreen Quick-Step Guide & Strike Next

  3. Please Pick your Main Network (The Wireless Which You Would Like to Extend)

    1. Enter the Wireless Password from the Current Wireless Router & See Next.

  4. Next Screen Will Allow You to Pick the Safety Type, Network Name(SSID) on the New Extended Network.

  5. Installation another Password if you Want to your extender Or Leave it as it is. You could always change it By Logging into the Tplink extender Console. Review the settings & Click On End

    1. Extender Will Reboot and Conserve Settings. Following having a Minute Please the extender & Plug it Somewhere involving the Place Where you have been having Issues Obtaining the Network Bars. Now You Might Be able to See Solid Led Lights About Extender that Means the Setup was Successful & Now Make use of the Password to Contact your New Extender & Enjoy Extended Wireless Network.