Publications
JH Kim, SH Moon, JS Ryu, SK Kim
Data Communication Based on MQTT in a Polymer Extrusion Process, 2022
Journal of visualized experiments: JoVE
SK Kim, DO Kazmer
Non-isothermal non-Newtonian three-dimensional flow simulation of fused filament fabrication
Additive Manufacturing 55, 102833, 2022
https://doi.org/10.1016/j.addma.2022.102833
SK Kim
Correlations for Convective Laminar Heat Transfer of Carreau Fluid in Straight Tube Flow
Energies 15 (7), 2368, 2022
https://www.mdpi.com/1996-1073/15/7/2368
SK Kim
Darcy friction factor and Nusselt number in laminar tube flow of Carreau fluid. Rheol Acta (2022).
https://doi.org/10.1007/s00397-021-01317-w
David O. Kazmer, Austin R. Colon, Amy M. Peterson, Sun Kyoung Kim,
Concurrent characterization of compressibility and viscosity in extrusion-based additive manufacturing of acrylonitrile butadiene styrene with fault diagnoses,
Additive Manufacturing, 102106, 2021,
https://doi.org/10.1016/j.addma.2021.102106.
Influence of Errors in Known Constants and Boundary Conditions on Solutions of Inverse Heat Conduction Problem
SK Kim
Energies 14 (11), 3313, 2021
Erratum:“Flow-rate based method for velocity of fully developed laminar flow in tubes”[J. Rheol. 62 (6), 1397–1407 (2018)]
SK Kim
Journal of Rheology 65 (2), 289-289, 2021
Rapid Numerical Estimation of Pressure Drop in Hot Runner System
JS Jung, SK Kim
Micromachines 12 (2), 207, 2021
High-Throughput Synthesis of Liposome Using an Injection-Molded Plastic Micro-Fluidic Device
SW Woo, YK Jo, YE Yoo, SK Kim
Micromachines 12 (2), 170, 2021
Sun Kyoung Kim, David O. Kazmer, Austin R. Colon, Timothy J. Coogan, and Amy M. Peterson
Non-Newtonian modeling of contact pressure in fused filament fabrication
Journal of Rheology 65, 27 (2021); https://doi.org/10.1122/8.0000052
JW Suh, YE Yoo, SK Kim
Flow characteristic during injection molding of PC/MWNT nanocomposites
Korea-Australia Rheology Journal 32 (4), 261-269
DOI: 10.1007/s13367-020-0025-2
Sun Kyoung KimSun Kyoung KimSang-Hyuk Lee, Optimal Dummy Pattern Design Method for PWB Warpage Control Using the Human-Based Genetic Algorithm,
August 2020 Micromachines 11(9):807
JiseonHong, Sun KyoungKim, Young-HakCho, Flow and solidification of semi-crystalline polymer during micro-injection molding,
International Journal of Heat and Mass Transfer, 153, June 2020, 119576
DOI:10.1016/j.ijheatmasstransfer.2020.119576
Sun Kyoung Kim, Forced convection heat transfer for the fully-developed laminar flow of the Cross fluid between parallel plates,
Journal of Non-Newtonian Fluid Mechanics, 2020, 104226
https://doi.org/10.1016/j.jnnfm.2019.104226
Sun Kyoung Kim, Collective viscosity model for shear thinning polymeric materials , Rheologica Acta, 2020
DOI: 10.1007/s00397-019-01180-w
Sun Kyoung Kim, Seulgi Bae, Jihyun Sung, Shinbi Choi, Detection of Inclusions and Degradation in Injection-Molded Thermoplastics, Journal of Composites and Biodegradable Polymers, 7, 17-24, 2019
DOI: 10.12974/2311-8717.2019.07.3
Sun Kyoung Kim, Flow rate based framework for solving viscoplastic flow with slip, Journal of Non-Newtonian Fluid Mechanics 269:37-46, 2019
DOI: 10.1016/j.jnnfm.2019.06.002
Sun Kyoung Kim, Areum Jeong, Numerical Simulation of Crystal Growth in Injection Molded Thermoplastics based on Monte Carlo Method with Shear Rate Tracking International Journal of Precision Engineering and Manufacturing, 20(4) 641-650 February 2019
DOI: 10.1007/s12541-019-00089-x
Eun-Min Park, Sun Kyoung Kim,Effects of Mold Heat Transfer Coefficient on Numerical Simulation of Injection Molding, Transactions of the Korean Society of Mechanical Engineers B 43(3):201-209, 2019
DOI: 10.3795/KSME-B.2019.43.3.201
Sun Kyoung Kim, Flow-rate based method for velocity of fully developed laminar flow in tubes, Journal of Rheology 62(6):1397-1407, 2018
Sun Kyoung KimSun Kyoung KimDae-Jin KimJae Sung JungYounghak ChoYounghak Cho, Flow instability of semicrystalline polymer melt during micro-injection molding, Journal of Micromechanics and Microengineering 24(8):085015, July 2014
DOI: 10.1088/0960-1317/24/8/085015
Yoo Y. E, Woo S W, Kim SK, Injection molding without prior drying process by the gas counter pressure, Polymer Engineering & Science, DOI: 10.1002/pen.23196, 2012
Sun Kyoung Kim, Prameterized Gradient Integration Method for Inverse Heat Conduction Problems, Numerical Heat Transfer Part B, Volume 61, Issue 2, 116-128, Feb 2012
http://dx.doi.org/10.1080/10407790.2012.642273
Se-Hoon Park, Sun Kyoung Kim, and Young-Ho Kim, Interface Analysis of Embedded Chip Resistor Device Package and Its Effect on Drop Shock Reliability, Journal of Nanoscience and Nanotechnology, 12, 2097-2101 Mar 2012
Sung-Won Kim, Sang-Hyuk Lee, Dae-Jin Kim, Sun Kyoung Kim, Simulation of Warpage During Fabrication of Printed Circuit Board, IEEE Transactions onComponents, Packaging and Manufacturing Technology, Volume 1, Issue 6, 884-892, Jun 2011
http://dx.doi.org/10.1109/TCPMT.2011.2114662
Sung-Ju Choi , Sun Kyoung Kim, Multi-scale filling simulation of micro-injection molding process, Journal of Mechanical Science and Technology, 25 (1) (2011) 1253~1260
http://www.springerlink.com/content/c615224866224v46/
Sun Kyoung Kim, Sung-Ju Choi, Kwan-Hee Lee, Dae-Jin Kim, Yeong-Eun Yoo, Observation of instabilities in flow front during micro injection molding process, Polymer Engineering & Science, Volume 50, Issue 7, pages 1377–1381, July 2010
http://onlinelibrary.wiley.com/doi/10.1002/pen.21679/abstract
Sun Kyoung Kim, Resolving the Final Time Singularity in Gradient Methods for Inverse Heat Conduction Problems, Numerical Heat Transfer, Part B: Fundamentals, Volume 57, Issue 1 January 2010 , pages 74 – 88
http://www.informaworld.com/smpp/content~db=all~content=a919934575~frm=titlelink
Y.E. Yoo, T.H. Kim, D.S. Choi, S.M. Hyun, H.J. Lee, K.H. Lee, S.K. Kim, B.H. Kim, Y.H. Seo, H.G. Lee and J.S. Lee, Injection molding of a nanostructured plate and measurement of its surface properties, Current Applied Physics, Volume 9, Issue 2, Supplement 1, March 2009, Pages e12-e18
http://dx.doi.org/10.1016/j.cap.2008.12.023
Yeong-Eun Yoo, Tae Hoon Kim, Doo-Sun Choi, Hak-Joo Lee, Seong Joo Choi, and Sun Kyung Kim, Study on Molding of a Nanostructured Plastic Plate and Its Surface Properties, Jpn. J. Appl. Phys. 48 (2009) 06FH07
http://jjap.jsap.jp/link?JJAP/48/06FH07/
Sun Kyoung Kim, Isaac M. Daniel, Observation of Permeability Dependence on Flow Rate and Implications for Liquid Composite Molding, Journal of Composite Materials, April 2007 vol. 41 no. 7 pages. 837-849
http://jcm.sagepub.com/content/41/7/837.short
Sung Yong Kang, Sun Kyoung Kim, Woo Il Lee, Penalty formulation for postfilling analysis during injection molding, International Journal for Numerical Methods in Fluids, Volume 57, Issue 2, pages 139–155, 20 April 2008
http://onlinelibrary.wiley.com/doi/10.1002/fld.1630/abstract
Sun Kyoung Kim, Bup Sung Jung and Woo Il Lee, An inverse estimation of surface temperature using the maximum entropy method, International Communications in Heat and Mass Transfer, Volume 34, Issue 1, January 2007, Pages 37-44
http://dx.doi.org/10.1016/j.icheatmasstransfer.2006.08.011
Sun Kyoung Kim, Object-Oriented Development of Inverse Heat Conduction Code Adaptable to Various Configurations, Numerical Heat Transfer, Part B: Fundamentals, Volume 50, Issue 3 July 2006 , pages 269 – 284
http://www.informaworld.com/smpp/content~db=all~content=a756747515~frm=titlelink
Sun K. Kim, Isaac M. Daniel, Pressure measurement technique in nano- and micro-channels using atomic force microscopy, Inverse Problems in Science and Engineering, Volume 14, Issue 7 October 2006 , pages 701 – 709
http://www.informaworld.com/smpp/content~db=all~content=a759354769~frm=abslink
Sun K. Kim and Isaac M. Daniel, Transient gas flow technique for inspection of fiber preforms in resin transfer molding Composites Part A: Applied Science and Manufacturing, Volume 36, Issue 12, December 2005, Pages 1694-1699
http://dx.doi.org/10.1016/j.compositesa.2005.03.002
Sun K. Kim, Woo Il Lee, IMPLEMENTATION OF INVERSE METHOD FOR ESTIMATING UNDETERMINED BOUNDARY IN A TWO-DIMENSIONAL SLAB BASED ON TEMPERATURE MEASUREMENT
Numerical Heat Transfer, Part A: Applications, Volume 46, Issue 5 September 2004 , pages 515 – 523
http://www.informaworld.com/smpp/content~db=all~content=a714035829
Sun K. Kim, Isaac M. Daniel, Gradient method for inverse heat conduction problem in nanoscale, International Journal for Numerical Methods in Engineering, Volume 60, Issue 13, pages 2165–2181, 7 August 2004
http://onlinelibrary.wiley.com/doi/10.1002/nme.1041/abstract
Sun Kyoung Kim and Woo Il Lee, Solution of inverse heat conduction problems using maximum entropy method, International Journal of Heat and Mass Transfer, Volume 45, Issue 2, January 2002, Pages 381-391
http://dx.doi.org/10.1016/S0017-9310(01)00155-7
Sun K. Kim; Isaac M. Daniel, Solution to Inverse Heat Conduction Problem in Nanoscale Using Sequential Method, Numerical Heat Transfer, Part B: Fundamentals, Volume 44, Issue 5 November 2003, pages 439 – 456
http://www.informaworld.com/smpp/content~db=all~content=a716100491~frm=abslink
Sun K. Kim, Dae-Hwan Kim and Isaac M. Daniel, Optimal control of accelerator concentration for resin transfer molding process, International Journal of Heat and Mass Transfer, Volume 46, Issue 20, September 2003, Pages 3747-3754
http://dx.doi.org/10.1016/S0017-9310(03)00214-X
Sun K. Kim and Isaac M. Daniel, Determination of three-dimensional permeability of fiber preforms by the inverse parameter estimation technique
Composites Part A: Applied Science and Manufacturing, Volume 34, Issue 5, May 2003, Pages 421-429
http://dx.doi.org/10.1016/S1359-835X(03)00087-3
Kim SK, Jung BS, Kim HJ, et al., Inverse estimation of thermophysical properties for anisotropic composite, EXPERIMENTAL THERMAL AND FLUID SCIENCE 27:697-704,2003
http://dx.doi.org/10.1016/S0894-1777(02)00309-6
Opperer, JG; Kim, SK; Daniel, IM, Characterization of local preform defects in resin transfer molding by the gas flow method and statistical analysis, COMPOSITES SCIENCE AND TECHNOLOGY 64:1921-1935,2004
Kim HJ, Kim SK, Lee WI, Flow and heat transfer analysis during tape layup process of APC-2 prepregs, JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS 17:5-12 2004
Kim SK, Lee WI, A maximum entropy solution for a two-dimensional inverse heat conduction problem, JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME 125:1197-1205,2003
Kim, SK; Daniel, IM, Gas flow test of braided preform quality for resin transfer moulding, ADVANCED COMPOSITES LETTERS,12:161-163,2003
Kim, SK; Opperer, JG; Daniel, IM, Detection of local preform defects by gas flow method and statistical analysis, ADVANCED COMPOSITES LETTERS,12:109-114,2003
Kim, SK; Opperer, JG; Daniel, IM, Gas flow method for detecting local preform defects by inverse estimation of space-varying permeability, JOURNAL OF COMPOSITE MATERIALS,37:1367-1383,2003
Kim SK, Kim HJ, Lee WI, Characterization of boundary conditions during thermoplastic composite tape lay-up process using an inverse method, MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING 11:417-426,2003
Kim, SK; Opperer, JG; Kim, DH; et al., Determination of in-plane permeability of fiber preforms by the gas flow method using pressure measurements, POLYMER COMPOSITES,24:34-44,2003
Kim SK, Lee JS, Lee WI, A solution method for a nonlinear three-dimensional inverse heat conduction problem using the sequential gradient method combined with cubic-spline function specification, NUMERICAL HEAT TRANSFER PART B-FUNDAMENTALS 43:43-61, 2003
Kim SK; Opperer, JG; Daniel, IM, Determination of permeability of fibrous medium considering inertial effects, INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER,29:879-885,2002
Kim SK, Lee WI, Inverse estimation of steady-state surface temperature on a three-dimensional body, INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW,12:1032-1050,2002
Kim SK, Lee WI, An inverse method for estimating thermophysical properties of fluid flowing in a circular duct, INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER 29:1029-1036,2002
Kim SK, Kim GM, Kim HJ, et al., An experimental study on the thermoplastic filament winding process using commingled yarns, ADVANCED COMPOSITES LETTERS 11:67-71,2002
Kim SK, Lee WI, Lee JS, Solving a nonlinear inverse convection problem using the sequential gradient method, KSME INTERNATIONAL JOURNAL 16:710-719, 2002
Kim HJ, Kim SK, Lee WI, A study on heat transfer during thermoplastic composite tape lay-up process, EXPERIMENTAL THERMAL AND FLUID SCIENCE 13:408-418,1996