Baxall CD9210/LV

Технические характеристики

1/3” Sony Hyper-HAD™ ПЗС матрица 752х582

580 линий разрешение по горизонтали

минимальная освещенность 0.07 люкс при F1.2 ( отражение 80%)

сигнал/ шум 48 дБ

управление автодиафрагмой DD, видео

AGC 28дБ, BLCвкл/выкл, EI вкл/выкл, LL, Gamma 1/ 0.45

С/CS-крепление объектива

питание 230 VAC или 12-30VDC/11-40VAC (индекс “/LV”)

размер 60х66х123мм, вес 600/350г

Camera Features

Sensor 1/3" Sony Hyper HAD™ CCD

Effective Pixels 752 (H) x 582 (V)

Sensitivity 0.07 Lux for usable picture with lens at F1.2 with AGC on (80% scene reflectance) at 40 IRE

Resolution 580 TVL

Video Output 1V p-p composite video via 75W

BNC connector on the rear of the camera; PAL: 625 lines 50 fields per second 2:1 interlace

Signal to Noise Ratio Better than 48dB

White Balance N/A

AGC Built in 28dB

Electronic Iris 1/50s - 1/100,000s - selectable On/Off via a dip switch

Backlight Compensation BLC selectable On/Off - weighted to centre third of scene

Gamma Correction User-selectable 1.0 or 0.45 via a dip switch

Synchronisation System Line lock – the option to switch to internal synchronisation is provided via a dip switch

Adjustable V phase The line lock vertical phase may be adjusted by ±120°

Specification CD9210 and CD9210/LV

Lens Options

Manual Any 'C' or 'CS' mount 1/3", 1/2", 2/3" or 1"

lens Auto Iris (video drive) Via 3 way, two part terminal block at the rear of the camera

Direct Drive (DC iris) 4-pin square type socket on the side of the camera; DC level is user defined via a potentiometer located next to the socket

Power Supply

Low Voltage version 12 - 30V AC; 11 – 40V DC

Mains version 230V AC, +6% -10%, 50Hz

Input Power Isolation Fully isolated power supply

Power Consumption Less than 4W

Mechanical

Lens Mount C/CS via racking back focus mechanism with two adjustment points (top and side)

Camera Mount 1/4-20 UNC or 1/4" BSW (top or bottom)

Dimensions 122.5 (L) x 59.5 (H) x 65.5 (W) mm

Weight Mains 0.6kg; low voltage 0.35kg

Material Die-cast zinc lens mount; extruded aluminium body; flame retardant ABS plastic front trim, rear bezel and door

CD9210 and CD9210/LV