Conference Contribution (reverse chronological order)
S. Sai Sravanthi, Swati Ghosh Acharyya, Effect of High-Power Intensity on Corrosion Behaviour of Aluminium-Steel Dissimilar Joints Made by Electron Beam Welding, In: Narasimham G., Babu A., Reddy S.,Dhanasekaran R. (eds) Recent Trends in Mechanical Engineering. Lecture Notes in Mechanical Engineering. Springer, Singapore pp 227-237, 2020.
S.S. Sravanthi, Swati Ghosh Acharyya, Praveen Chapala, Effect of GMAW-brazing and Cold Metal Transfer Welding Techniques on the corrosion behaviour of Aluminium-Steel lap joints, Materials Today Proceedings, Volume 18, Part 7, 2019, Pages 2708-2716.
Pandu Sunil Kumar, Swati Ghosh Acharyya :Controlling chloride induced stress corrosion cracking of 316l SS in chloride environment by simple surface engineering", oral presentation at NIT Warangal, National Conference on Frontiers in Corrosion Control of Materials (FCCM) during 28th to 29thJune-2018
Pandu Sunil Kumar, Kamal mankari, Swati Ghosh Acharyya, European Conference on Residual stresses (ECRS 10), Distinguishing effect of buffing on residual stress distribution and susceptibility of austenitic stainless steel to stress corrosion cracking - oral presentation, from 11-14, September (2018) at Leuven, Belgium.
Pandu Sunil Kumar, Swati Ghosh Acharyya, Controlling chloride induced stres corrosion cracking of 316L SS in chloride environment by simple surface engineering Materials Today proceedings, 2018 ( Accepted)
Pandu Sunil Kumar, Kamal Mankari, Swati Ghosh Acharyya , Distinguishing effect of buffing on residual stress distribution and susceptibility of austenitic stainless steel to stress corrosion cracking, Materials Research Proceedings 6 (2018) 139-144
Kamal Mankari and Swati Ghosh Acharyya, “Cracking of AISI 321 Stainless steel welds in solar thermal power plant: Root cause Analysis”, CORCON 2017 organised by NACE from 17- 21st September, 2017 held at Mumbai.
Pandu Sunil Kumar and Swati Ghosh Acharyya, “Surface buffing and its effect on chloride induced SCC of 304L austenitic stainless steel”, International Conference on Advances in Metallurgy, Materials, and Manufacturing. IMMME17, 6-8 th March 2017.
Pandu Sunil Kumar and Swati Ghosh Acharyya “Fabricating chloride induced stress corrosion cracking resistant surfaces of 304L stainless steel by simple surface engineering”, CORCON 2017 organised by NACE from 17-21st September, 2017 held at Mumbai.
Praveen Chapala, Swati Ghosh Acharyya, S. M. Shariff, Ganesh Naik, “Novel Ti-Nb alloys with improved wear resistance for biomedical implant application”, 38th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) 2016
Praveen Chapala, S. G. Acharyya, A Shariff, Ganesh Naik, "Microstructural characterization of beta titanium alloys for biomedical implants, National Conference on Advances in Materials Processing and Characterization, 4th – 6th January 2016.
Pandu Sunil Kumar, Swati Ghosh Acharyya. ‟Effect of different surface working operation on the microstructure and hardness of AISI 304L austenitic stainless steel" at NIT Warangal, National Conference On Advances in Materials Processing and Characterization l (NCAMPC) during 4th Jan 2016 to 6th Jan 2016
L. Subashini, E. Anbu Rasu, K. V. Phani Prabhakar, G. Padmanabham, Swati Ghosh Acharyya , “Laser- MIG hybrid welding of 12mm thick Reduced Activation Ferritic Martensitic (RAFM) steel”, Workshop on Advances in Materials Joining Technologies, IIW Hyderabad, 29th May 2015.
L. Subashini, K. V. Phani Prabhakar, G. Padmanabham, Swati Ghosh Acharyya, “Laser Arc Hybrid Welding of 10mm Thick Maraging Steel Plate- A Comparison with Multi-pass MIG Welding”, 2nd International Conference on Advances in Cutting, Welding & Surfacing, Coimbatore, 5-7 August 2015.
L. Subashini, E. Anbu Rasu, K. V. Phani Prabhakar, G. Padmanabham, Swati Ghosh Acharyya, “Preliminary Investigation on Laser- MIG Hybrid Welding of Ferritic Martensitic Steels”, International Conference on Applications of Lasers in Manufacturing, New Delhi, 9- 11 September, 2015.
L. Subashini, K. V. Phani Prabhakar, Swati Ghosh Acharyya, G. Padmanabham, “Laser Hybrid Welding of Thick Plates of High Alloy Steels”, International Institute of Welding6th Welding Research and Collaboration Colloquium, Hyderabad, 7 – 9, April 2016.
S. Sravanthi, S.G. Acharyya, Phani Prabhakar, G. Padmanabham, “Characterisation of Al- mild steel dissimilar metal weld joints for automobile application”, at NIT Warangal, National Conference On Advances in Materials Processing and Characterization (NCAMPC) during 4th Jan 2016 to 6th Jan 2016.
Sriram Sathaiah, Swathi Ghosh Acharyya, Optimisation of the different stages of homogenization treatment of 6061 Al alloy, at NIT Warangal, National Conference On Advances in Materials Processing and Characterization (NCAMPC) during 4th Jan 2016 to 6th Jan 2016.
Ravi Kiran, Tejaswi Kapuru, S G Acharyya, G Padmanabham, Fabrication of large area graphene on Ni 200 by using LASER for improved corrosion resistance, CALM 2015 international conference on Lasers in Manufacturing during 21-23rd September
L. Subashini, K. V. Phani Prabhakar, Swati Ghosh and G. Padmanabham, “Laser Arc Hybrid Welding of 10mm Thick Maraging Steel Plate- A Comparison With Multi-pass MIG Welding”, Proceedings of the 2nd International Conference On Advances In Cutting, Welding & Surfacing , Coimbatore, Page 77- 87, 2015.
Swati Ghosh, M Kiran Kumar, Vivekanand Kain, "Studying the Mechanism behind Stress Corrosion Cracking of Non Sensitized 304L Austenitic Stainless Steel", Proceeding of Stainless Steel Centenary Symposium (SSCS),Mumbai, August 12-14, 2013.
Swati Ghosh Acharyya, H. Agarwal, V. Kain and G. K. Dey, "Impact of Surface Finishing on the Microstructure and Electrochemical Nature of 304L Stainless Steel", Proceedings of ELAC, 2013. (in press)
Swati Ghosh, M Kiran Kumar, Vivekanand Kain, "The effect of surface working on the high temperature oxidation behavior of 304L stainless steel", proceedings of CORCON 2011, Mumbai, September 28-30, 2011.
M. Kiran Kumar, Swati Ghosh and Vivekanand Kain, "Controlled Distance Electrochemistry (CDE) for High Temperature Oxidation Studies in Low Conducting Electrolytes - Application to Stainless Steels and Zirconium Alloys", proceedings of ISEAC 2011, Goa, December 7-10, 2011.
S. Roychowdhury, Swati Ghosh, V. P. S. Rana and V. Kain, "Stress Corrosion Cracking and embrittlement related failures in stabilized stainless steels", Proceedings of CORCON 2010, Goa, September 23-26, 2010.
Swati Ghosh and Vivekanand Kain, "Understanding the effect of surface machining of 304L stainless steel by in-situ electrochemical study at high temperature and pressure", Proceedings of Electrochem-2010: Electrochemistry and Sustainability, Telford, UK from September 14 - 15, 2010.
Swati Ghosh, Vivekanand Kain, Vivek Mittal and S. K. Baveja, "Effect of residual stress and strain generated during manufacturing process on the stress corrosion cracking susceptibility of austenitic stainless steel", Proceedings of the conference Corrosion, NACE International, Houston, 14-18, March, 2010.
Kiran Kumar, Swati Ghosh, Sneha Rhode, Vivekanand Kain, Saurabh Goverdhan, Ved Singh and R. S. Soni, "Corrosion behaviour of stainless steel 304L and 304L NAG in nitric acid environment - Effect of cold work", proceedings of ISAS-2009 at IGCAR, Chennai, September 2009.
Swati Ghosh and Vivekanand Kain, "Effect of microstructural changes induced by different stages of fabrication on chloride stress corrosion cracking susceptibility of AISI 304L at ambient temperature", proceedings of Environmentally assisted cracking, Vadodara, 6-9th December, 2009.
M. Kiran Kumar, Krishna Gaonkar, Swati Ghosh and Vivekanand Kain, "Characterization of magnetite layer formed on carbon steel surface exposed to hot conditioning environment of PHWRs - actual and simulated", proceedings of Environmentally assisted cracking, Vadodara from 6-9 December, 2009.
Swati Ghosh , V. Kain, A. Ray, H. Roy, S. Sivaprasad, S. Tarafder, K. K. Ray, "Sensitization induced deterioration in fracture toughness of 304LN austenitic stainless steel", Proceedings of the 12 International conference on fracture, held at Ottawa, Canada from July 12 - 17, 2009.
K. K. Ray, H Roy, A Bhattacharyya, Swati Ghosh, N. Parida, S. Tarafder, S. Sivaprasad, C.Das, A Bhaduri, V. Kain, B. P. Sharma, "Fracture toughness of stainless steels and their weldments", proceedings of ISAS-2007, Chennai, 11 April 2007.
Swati Ghosh , S. Roychowdhury, V. Kain, P.V. A. Padmanabhan, and K.K. Ray, "Plasma sprayed yttria stabilised zirconia coating to guard stainless steels against intergranular corrosion", proceedings of International seminar on 'Prospects, Problems and Potential of Coated Steels', Jamshedpur, 14-16 February 2008.
Swati Ghosh , S. Roychowdhury, V. Kain, P.V. A. Padmanabhan, K.K. Ray and B. P. Sharma, "Plasma Spray Coating of YSZ to Prevent Stress Corrosion Cracking of Austenitic Stainless Steels", proceedings of Advanced Nuclear Materials, BARC, Mumbai, 12-14 December 2006.