Stage Frequency Matrix -- 2026
Embedded Files
Since STPR topography is so convoluted (glacially dissected plateau, if the geologists are correct), and since the proximity of stages can be relatively close, STPR communications are run on a series of 4-6 repeater networks and tower locations. Consequently, you may need to program a series of repeater and simplex frequencies to match your assignment needs.
Please be sure to have ALL the frequencies from the table below programmed!
Please program the pairs so that your stage team's simplex frequency is just one memory away from the Stage assigned repeater!!!
STPR terrain is so convoluted that a 50 watt mobile radio is needed for 99% of locations!
Important Change to SIMPLEX programming, please adjust your radios/programming software, thank you.
145.270 repeater gets paired with SIMPLEX 146.420
Reducing by 1 MHz! i.e. This is changed from 147 MHz! The "27 repeater" is likely going to be a backup repeater for a stage. Thank you!
Backup repeaters for each stage are still under consideration!
Backup repeaters for each stage are still under consideration!
Google Sites
Report abuse