Embedded Files
Available Packing
Oils - 200 liters/drum and 18 liters/pail
Grease - 180kgs/drum and 15 kgs/pail
SSP Silver Star Plus Motor Oils
SSP Silver Star Plus Motor Oils
SSP motor oil is designed to meet the warranty requirements of all engine manufactures of gasoline and diesel engines calling for an API service CI-4/CH-4/CG-4/CF-4/SL Motor Oil. This motor oil is a blend of highly refined base oils and specially selected additives designed to provide excellent performance in all recommended applications. It has the oxidation stability necessary to withstand the high crankcase temperatures encountered n over the road service.
FEATURES
Superior engine protection for automotive engines in all services.
Low ash minimizes combustion chamber deposits.
Excellent rust protection.
Effective detergency provides excellent deposit control, minimizes sludge formation, extends filter life.
Multi grades provides full protection in all climates.
Effective anti-scuff additives protects cam lobes and other highly loaded parts from wear.
The New generation DI Chemistry used in this oil will give a false reading if glycol in used oil analysis.
OEM Silver Star Plus exceeds API service classification CF-4/CF-2/CF/SG and specification MIL-L-2104F and MILL-L-46152E.
In addition, OEM Silver Star Plus Motor oil meets or exceeds the requirements of all following superceded military specifications; MIL-L-2104C, MIL-L-2104D,MILL-L-2104E, and MIL-L-45199B.
Meets requirements of Cummins (15W-40), Caterpillar series 3 and TO-2,Detroit Diesel (149 Series Engine-SAE 30, and 40 only) and Mack EO-K (15W 40).
SAE Grades 10W, 30, and 15W-40, are suitable for use in Allison transmissions requiring a C-3 fluid.
Recommended for all turbo charged engines where manufacturer specifies API CI-4, CH-4, CG-4, CF-4, CF-2, CF, CD, series 3, MIL-L-2104F, or MILL-L-2104E quality oil.
AW Power Up Anti Wear Hydraulic Oils
AW Oils are manufactured from highly refine Paraffinic base oils and are fortified with an inhibitor system to provide products which insure maximum performance in all aspects of hydraulic service. They keep wear rates low on critical pump parts and rust and corrosion problems are eliminated by the rust inhibitor. A foam suppression additive eliminates concerns over operating problems due to foam buildup in the hydraulic storage tank even in high circulation rate systems with low residence times.
FEATURES
Low wear in severe industry OEM pump specification tests means long equipment life in even the most severe service.
High resistance to oxidation gives long oil service life and reduced maintenance expenses due to less frequent oil change.
Excellent air line oil with minimum stray mist.
Highly machined surfaces of hydraulic system components are protected from rust and corrosion.
Foam inhibition prevents formation of excessive amounts of foam and reduces the danger of pump failure due to cavitation.
Excellent demulsibility means any water present separates from the oil quickly allowing the water to settle out and be drained from the system.
a versatile product which can be widely used in may different industrial applications to reduce inventory, prevent equipment damage due to use of the wrong oils and reduce overall maintenance costs.
Recommended for all hydraulic systems regardless of the operating pressure.
Specifically designed for hydraulic systems operating over 1000 psi which require anti-wear protection for pump parts.
Recommended for all hydraulic pump designs including vane, axial and radial piston pumps.
widely used in machine tools, presses, die casting machines, circulating systems and hydraulic control systems.
Meets DIN 51524 Part2(HLP), ISO grades 22-100
EPGL Industrial E.P Gear Oils
EPGL Industrial E.P Gear Oils
EPGL gear oils are formulated from high quality, high VI base oils combined with selected additives to provide resistance to foaming, corrosion and oxidation. Special additives are used to give these oils extreme pressure characteristics which permit industrial gears to withstand heavy loads and shock loading. Unique additive package employed in industrial EP gear oils is non corrosive to brass, bronze, steel or other alloys.
FEATURES
Truly multi-purpose product - wide range of application.
Excellent EP and anti-wear properties
Superior thermal stability for longer service.
Compatible with steel, bronze, copper and copper alloys.
Versatile multi-purpose industrial gear oils of outstanding quality
Available in all ISO grades.
Meet AGMA ( American Gear manufactures Assn ) Gear Specifications 2EP thru 8EP.
Used in bevel, spur, herringbone, planetary, worm and industrial hypoid gears.
Also used in chain drives, sprockets, plain and anti-friction bearings, slide guides and flexible couplings.
Recommended for use in manual transmissions, gear cases and worm gears on mobile contractor type equipment.
TMP Transtar MP Gear Oils
TMP Transtar MP Gear Oils
TMP gear oils are multi-purpose sulfur-phosphorus type hypoid gear lubricant meeting requirements of API Service Classification GL5. They are manufactured from highest quality base oils fortified with VI improver, rusts inhibitors, foam suppressants, anti wear and extreme pressure additives and pour point depressants. The multi-viscosity oil formulations permit use over a wide temperature range.
FEATURES
Protects hypoid gears from wears and scuffing.
Provides rust protection to gears.
Multi-purpose for minimum inventory.
Multi- viscosity provides year round use.
Non-foaming.
Compatible with other automotive gear oils.
API-GL5 and MT-1.
Meets military specification Mil-PRF-2105E.
Meets Mack specification GO-F, GO-G, GO-H & GO-J.
Rockwell specification O-76A, O-76B, O-76D.
Recommended for differentials and conventional transmission in passenger cars and trucks where GL5 fluids are specified.
Suitable as make-up in limited slip differentials. ( Factory specified lubricant required on complete refill of new or rebuilt units )
SC Screw Air Compressor Oils
SC Screw Air Compressor Oils
SC oils are high quality air compressor oils based on advance base stock technology with improved thermally stable additives. These superior oils offer outstanding resistance to sludge formation, are chemically stable, and exhibit excellent anti wear protection. They are available in ISO grades to cover a wide range of equipment and operational conditions. All grades offer significant advantages in high temperature applications where long service life and minimal deposits are required. SC oils are recommended for service in vane, piston, and rotary screw compressors and greatly reduced deposits in both all single and multi stage reciprocating air compressors. They show also improvements in performance when used in gear reducers, fan and blower bearings, pumps, mist systems applications where premium rust and oxidation inhibited oils are specified.
FEATURES
Excellent oxidation and thermal stable
Excellent high and low temperature performance
Superior wear protection
Reduced foaming and air entrapment
Potential energy savings
Excellent corrosion protection
Minimal deposits and sludge
Greatly extended drain intervals
ATF D-lll Automatic Transmission Fluid
ATF D-lll Automatic Transmission Fluid
ATF Dexron III is manufactured to stringent new vehicle manufacturers specifications from premium quality paraffinic base oils blended with a specifically balanced additive combination to provide high oxidation stability, excellent foam resistance, corrosion and wear protection, and heat resistance. This complex fluid is also compounded with a friction-modifying additive to provide smooth lock-up of clutches without chatter. It is a multi purpose fluid that meets and exceeds all current original equipment manufacturers specifications for automatic transmission fluids, including latest, rigorous DEXRON III and MERCON revised specification.
FEATURES
Meets car makers warranty requirements
Excellent wear protection and quiet, smooth operation
Superior thermal and oxidation stability compared to conventional Dexron II-E fluids.
Protects hypoid gears from wears and scuffing.
Protects against rust and corrosion.
Outstanding seal compatibility.
Will not degrade nylon components
GM Dexron-IIE, Caterpillar, Ford Mercon, Jaguar,
Mercedes-Benz Passenger car, Volvo, Mercedes-Benz Commercial,
SAAB, ZF TE ML-11, Scania, Volkswagon,
MAN, Renault, Leyland Pneumocyclics, Voith,
Porche, Renke, BMW, Clark, Peugoet S.A,
Allison C-4, Twin Disc.API-GL5 and MT-1.
RO Premium Machine Oils
RO Premium Machine Oils
RO oils are formulated from highly refined paraffinic base oil fortified with the unique special extreme pressure additives. They meet the varying lubrication requirements for different functional mechanisms in the same machine. They are designed for the broad versatility and high performance oils for excellent equipment protection and outstanding versatility in the wide variety of industrial applications. They are used widely in steam turbines and hydro turbines with splash, bath and ring-oiling arrangements, lubricators or centralized lubrication systems, most air lines or pneumatic systems, hydraulic systems,bearings lubrication and high speed gear transmission oil and air compressor applications as well as vacuum pumps.
FEATURES
Excellent wear protection and quiet, smooth operation
Superior thermal and oxidation stability
Protects against rust and corrosion.
Outstanding long life performance
Outstanding versatility for most applications.
General Oil lubrication
Hydraulic Systems and pumps
Air Compressors
Steam and hydro Turbines, air lines, Vacuum Pumps
Gears lubrication
HTO Heat Transfer Oils
HTO Heat Transfer Oils
HTO are manufactured from solvent extracted quality paraffinic base oils specifically designed for use as a heat transfer fluids. Contains an effective inhibitor to assist in keeping systems clean and resist oxidation and thermal cracking. The low viscosity of Heat Transfer Oils permit rapid and efficient transfer of heat and greater ease of circulation. Recommended for in both ‘open’ and ‘closed’ systems found in asphalt plants, chemical plants and other industries. Used in closed systems where the bulk fluid temperature does not exceed 600F. Used in open systems where fluid temperature od not exceed 395F at point of contact with air. The fluids mist likely point of contact with air occurs at the expansion tank which is vented to the atmosphere.
FEATURES
Good thermal and oxidation stability for long service life
High thermal conductivity for quick rates of heat transfer
Low pour point to avoid cold start difficulties
Non-conductive to steel, stainless steel or aluminum heat transfer systems.
Outstanding long life performance.
MP10 Multi Purpose Grease
MP10 Multi Purpose Grease
MP greases are premium quality, lithium greases containing a lead-free extreme pressure agent. These greases are formulated with high quality solvent-refined base stocks combined with oxidation and corrosion inhibitors. MP greases are available in NLGI Grades 0, 1 and 2 and as a Semi-fluid.
Benefits
The smooth, buttery texture of the grease in conjunction with high quality mineral oil provides excellent pumpability over a wide temperature range. The extreme pressure agent used provides the added lubrication required to handle severe conditions characterized by high bearing and shock loads. Oxidation and corrosion inhibitors, and a high quality soap base yield a product with excellent shear stability, load carrying properties, corrosion resistance and oxidation stability.
The combination of these properties makes MP greases truly multipurpose products providing broad application, thereby reducing the number of products required. Thus, substantial reductions in storage And handling costs are possible with these universal products, while at the same time reducing potential of costly equipment failures associated with misapplication of product. The service temperature range of these greases is -20°F to 250°F continuous, with peak intermittent temperatures up to 350°F.
MP11 EP High Speed Grease
MP11 EP High Speed Grease
MP11 grease is special formulated anti-friction properties provides good protection in automotive and industrial applications including all grease fittings where a semi-solid or high consistency lubricant is normally used. It is also used in grease cups, pre-sealed bearings and general chassis lubrication. It is also formulated for use as an universal bearing grease wherever an exceptional high quality lubricating grease is called for. This grease is formulated with high quality solvent-refined base stocks combined with oxidation and corrosion inhibitors and available in NLGI Grades 0, 1 and 2 and as a Semi-fluid.
Benefits
MP11 grease contain high oxidation inhibitors and offers positive protection for extreme services which require heavy duty performance grease. It is strongly meeting the requirement factors as an universal wheel bearing grease for commercial automobiles and heavy trucks. MP11 special formulated anti-friction properties provides good protection in automotive and industrial. The combination of these properties makes MP greases truly multipurpose products providing broad application, thereby reducing the number of products required. Thus, substantial reductions in storage And handling costs are possible with these universal products, while at the same time reducing potential of costly equipment failures associated with misapplication of product. The service temperature range of these greases is -20°F to 250°F continuous, with peak intermittent temperatures up to 350°F.
Page updated
Google Sites
Report abuse