Journal Publications

1. D. Pani, J. Gupta, J.N. Francis, S.S. Nene, I. Banerjee and J. Singh: In-Vitro Corrosion and Cytocompatibility Assessment of Compositionally Complex β-Ti Alloy for Implant Applications, Materials Chemistry and Physics, 348 (2026) 131707. DOI: 10.1016/j.matchemphys.2025.131707

2. J. Gupta, A. Arora, and J. Singh: Advances in High-Temperature Deformation of Titanium Alloys: Experimental and Modeling Aspects for Industrial Applications, Materials Science & Engineering A, 948 (2025) 149295. DOI: 10.1016/j.msea.2025.149295

3. D. Pani, A. Chattree, J. Gupta, S.S. Nene, and J. Singh: Mechanical and corrosion properties of novel β-Ti-rich compositionally complex alloys in the as-cast state, Journal of Materials Engineering and Performance, (2025) In-press. DOI: 10.1007/s11665-025-12382-0

4. S. Nene, J. Singh, A. Dutta, A.R. Balpande, D. Mishra, P. Jangra, A. Chattree: Deciphering cocktail effect in high entropy conventional alloy via randomization of compositionally lean matrix, Materials Today Communications, 48 (2025) 113684. DOI: 10.1016/j.mtcomm.2025.113684

5. A. Gupta, J. Singh, R. Chhibber and Y.K. Singla: Quantitative Analysis of Thermal Properties in SMAW Electrode Coatings Based on CaF2-Al2O3-CaO-SiO2 Using Regression Models, The International Journal of Advanced Manufacturing Technology, 140 (2025) 1731–1747. DOI: 10.1007/s00170-025-16364-3

6. A. Chattree, A. Pandey, S. Nene and J. Singh: Precipitation-induced strength-ductility synergy in Ni-based compositionally complex alloy during static aging, Journal of Materials Engineering and Performance, (2025) In-press. DOI: 10.1007/s11665-025-11302-6

7.  J. Gupta, I.K. Jha and J. Singh:  Recent advances in the aging of β-titanium alloy, Journal of Alloys and Compounds, 1024 (2025) 180098. DOI: 10.1016/j.jallcom.2025.180098

8. S. Kumar, M. Panchal, A.N. Gandi, L. Kaushik, S.-H. Choi and J. Singh: Investigation of Tensile Twinning on Texture and Microstructure Evolution of Mg-3Al-1Zn-1Ca Alloy under In-Plane Shear Deformation, Journal of Magnesium and Alloys, 13 (2025) 1815-1828. DOI: 10.1016/j.jma.2025.02.017

9. M. Panchal, L. Kaushik, Ravi K.R., S.-H. Choi and J. Singh: Exploring Microstructure and Texture Evolution in AZX311 Mg Alloy under Cyclic Shear Deformation, Journal of Magnesium and Alloys, 13 (2025) 1258-1274. DOI: 10.1016/j.jma.2025.02.009

10. D. Mishra, A. Dhal, X. Li, S. Guo, R.L. Narayan, R.S. Mishra, J. Singh and S.S. Nene: Phase separation induced heterostructure promotes strength-ductility synergy in Cu-rich compositionally complex alloy in as-cast state, Materials Today Communications, 44 (2025) 112020. DOI: 10.1016/j.mtcomm.2025.112020

11. J. Gupta, I.K. Jha, R.K. Khatirkar and J. Singh: Microstructure Evolution During Aging Heat Treatment of Metastable Ti-15V-3Cr-3Al-3Sn β Titanium Alloy, Journal of Materials Engineering and Performance, 34 (2025) 19945–19956. DOI: 10.1007/s11665-025-10667-y

12. C.S. Hyun, J. Singh, M. Panchal, M.S. Kim, A. Komissarov, K.S. Shin, and S.-H. Choi: Deformation Mechanisms in Pure Mg Single Crystal under Erichsen Test: Experimental Observations and Crystal Plasticity Predictions, International Journal of Plasticity, 184 (2025) 104198. DOI: 10.1016/j.ijplas.2024.104198

13. A. Gupta, J. Singh and R. Chhibber: Modeling of physicochemical and thermophysical characteristics of SrO-CaO-Al2O3-CaF2-based shielded metal arc welding coating, Journal of Process Mechanical Engineering, 239 (2025) 167–180. DOI: 10.1177/09544089231172017

14. J.N. Francis, S. Saha, D. Tiwari, A. Chugh, J. Singh, and I. Banerjee: Polyetheretherketone-hydroxyapatite composite filament: A comparative analysis of the effect of micro and nano hydroxyapatite particles on extrusion and performance, Polymer Composites, 46 (2025) 6842-6857. DOI: 10.1002/pc.29393

15. A. Chattree, A. Pandey, S. Nene and J. Singh: High-temperature deformation behavior and concurrent microstructural evolution in novel Ni-based compositionally complex alloy, Journal of Alloys and Metallurgical Systems, 8 (2024) 100127. DOI: 10.1016/j.jalmes.2024.100127

16. J. Gupta, I.K. Jha, R.K. Khatirkar and J. Singh: Effect of aging on tensile and fracture behavior of a metastable Ti-15V–3Cr–3Al–3Sn β-titanium alloy, Journal of Alloys and Compounds, 1004 (2024) 175803. DOI: 10.1016/j.jallcom.2024.175803

17. A. Gupta, J. Singh and R. Chhibber: Predictive Modeling of Wettability Characteristics in Developed Shielded Metal Arc Welding Electrode Coating Fluxes: A Regression and Artificial Neural Network Approach, Metallurgical and Materials Transactions B, 55 (2024) 3184–3200. DOI: 10.1007/s11663-024-03170-7

18. M. Panchal, L. Kaushik, Ravi K.R., S.-H. Choi and J. Singh: Microstructure and texture evolution in AZX311 Mg alloy during in-plane shear deformation, Journal of Alloys and Compounds, 999 (2024) 174977. DOI: 10.1016/j.jallcom.2024.174977

19. A. Gupta, L. Kaushik, S. Pawar, J.-H. Kang, S.-H. Choi and J. Singh: Revealing the inhomogeneous nature of microstructure and texture evolution in the cold-rolled CoCrFeMnNi alloy during static recrystallization, Journal of Alloys and Compounds, 995 (2024) 174727. DOI: 10.1016/j.jallcom.2024.174727 

20. A. Gupta, J. Singh and R. Chhibber: Comparative Analysis of Wettability Characteristics in Developed SMAW Electrode Coating Fluxes: A Regression Model and ANN Approach, JOM, 76 (2024) 3707-3720. DOI: 10.1007/s11837-024-06595-2

21. M. Panchal, L. Kaushik, M.-S. Kim, Ravi K.R., S.-H. Choi and J. Singh: Effect of pre-twinning and heat treatment on formability of AZX311 Mg alloy, Journal of Magnesium and Alloys, 12 (2024) 1154-1169. DOI: 10.1016/j.jma.2024.02.008

22. A. Gupta, J. Singh and R. Chhibber: Dissimilar welding of austenitic and ferritic steels using nickel and stainless-steel filler: Associated issues, Journal of Process Mechanical Engineering, 238 (2024) 2524–2544. DOI: 10.1177/09544089231159776

23. M. Panchal, Ravi K.R., L. Kaushik, R.K. Khatirkar, S.-H. Choi and J. Singh: Texture Control Techniques for Improving Room Temperature Formability of Mg Alloys including Pre-twinning: A Review, Metals and Materials International, 29 (2023) 3471-3489. DOI: 10.1007/s12540-023-01472-0

24. M. Panchal, L. Kaushik, Ravi K.R., R.K. Khatirkar, S.-H. Choi and J. Singh: Recent Advances in In-Plane Shear Test of Mg Alloy Sheets, Journal of Magnesium and Alloys, 11 (2023) 405-424. DOI: 10.1016/j.jma.2023.02.006

25. A. Gupta, J. Singh and R. Chhibber: Investigation of thermophysical and physicochemical characteristics of Al2O3-SiO2-CaO-Na3AlF6 flux for SMAW electrode coating, Silicon, 15 (2023) 3463-3477. DOI: 10.1007/s12633-022-02258-6

26. A.K. Singh, L. Kaushik, S. Pawar, J. Singh, H. Das, M. Mondal, S.-T. Hong and S.-H. Choi: Unraveling the heterogeneous evolution of the microstructure and texture in the thermomechanically affected zone of commercially pure titanium during friction stir processing, International Journal of Mechanical Sciences, 239 (2023) 107894. DOI: 10.1016/j.ijmecsci.2022.107894

27. J.N. Francis, I. Banerjee, A. Chugh, and J. Singh: Additive manufacturing of polyetheretherketone and its composites – A review, Polymer Composites, 43 (2022) 5802-5819. DOI: 10.1002/pc.26961

28. A.K. Singh, L. Kaushik, J. Singh, H. Das, M. Mondal, S.-T. Hong and S.-H. Choi: Evolution of microstructure and texture in the stir zone of commercially pure titanium during friction stir processing, International Journal of Plasticity, 150 (2022) 103184. DOI: 10.1016/j.ijplas.2021.103184

29. A. Gupta, R.K. Khatirkar and J. Singh: A review of microstructure and texture evolution during plastic deformation and heat treatment of beta-Ti alloys, Journal of Alloys and Compounds, 899 (2022) 163242. DOI: 10.1016/j.jallcom.2021.163242

30. S.-E. Lee, M.-S. Kim, Y.-W. Chae, H. Guim, J. Singh and S.-H. Choi: Effect of intermediate heat treatment during hot rolling on texture and formability of annealed AZ31 Mg alloy sheets, Journal of Alloys and Compounds, 897 (2022) 163238. DOI: 10.1016/j.jallcom.2021.163238

31. T.R. Dandekar, A. Kumar, R.K. Khatirkar, J. Singh and D. Kumar: Effect of isothermal aging at 750°C on microstructure and mechanical properties of UNS S32101 lean duplex stainless steel, Materials Today Communications, 29 (2021) 102753. DOI: 10.1016/j.mtcomm.2021.102753 

32. L. Kaushik, J. Singh, J.-H. Kang, Y.S. Ko, D.-I. Kim, J.-Y. Suh and S.-H. Choi: Deciphering the role of multiple generations of annealing twins on texture evolution in cold-rolled high entropy alloys during annealing, Scripta Materialia, 205 (2021) 114221. DOI: 10.1016/j.scriptamat.2021.114221

33. L. Kaushik, M.-S. Kim, J. Singh, J.-H. Kang, Y.-U. Heo, J.-Y. Suh and S.-H. Choi: Deformation Mechanisms and Texture Evolution in High Entropy Alloy during Cold Rolling, International Journal of Plasticity, 141 (2021) 102989. DOI: 10.1016/j.ijplas.2021.102989

34. J. Singh, S. Chakrabarty and P. Pant: Strengthening effect of grain and twin boundaries in zirconium bi-crystal micropillars, Philosophical Magazine Letters, 101 (2021) 93-106. DOI: 10.1080/09500839.2020.1859150

35. A.B. Kale, J. Singh, B.-K. Kim, D.-I. Kim and S.-H. Choi: Effect of the initial microstructure on the deformation heterogeneities of 316L stainless steels fabricated by selective laser melting processing, Journal of Materials Research and Technology, 9 (2020) 8867-8883. DOI: 10.1016/j.jmrt.2020.06.015

36. J. Singh, M.-S. Kim, L. Kaushik, J.-H. Kang, D. Kim, E. Martin and S.-H. Choi: Twinning-detwinning behavior of E-form Mg alloy sheet during in-plane reverse loading, International Journal of Plasticity, 127 (2020) 102637. DOI: 10.1016/j.ijplas.2019.11.016 

37. J. Singh, M.-S. Kim and S.-H. Choi: The effect of initial texture on micromechanical deformation behaviors in Mg alloys under a mini-V-bending test, International Journal of Plasticity, 117 (2019) 33-57. DOI: 10.1016/j.ijplas.2018.01.008

38. J. Singh, M.-S. Kim, J.-H. Lee, H. Guim and S.-H. Choi: Microstructure evolution and deformation behaviors of E-form and AZ31 Mg alloys during ex-situ mini-V-bending tests, Journal of Alloys and Compounds, 778 (2019) 124-133. DOI: 10.1016/j.jallcom.2018.11.138

39. J. Singh, M.-S. Kim, J.-H. Kang and S.-H. Choi: Mesoscale simulation of deformation behaviors of E-form and AZ31 Mg alloys during ex-situ mini-V-bending tests, Metals and Materials International, 25 (2019) 641-656. DOI: 10.1007/s12540-018-00217-8

40. J. Singh, M.-S. Kim, S.-E. Lee, E.-Y. Kim, J.-H. Kang, J.-H. Park, J.-J. Kim and S.-H. Choi: Heterogeneity in deformation and twinning behaviors through the thickness direction in E-form Mg alloy sheets during an Erichsen test, Materials Science and Engineering A, 729 (2018) 370-384. DOI: 10.1016/j.msea.2018.05.072

41. J. Singh, M.-S. Kim and S.-H. Choi: The effect of strain heterogeneity on the deformation and failure behaviors of E-form Mg alloy sheets during a mini-V-bending test, Journal of Alloys and Compounds, 708 (2017) 694-705. DOI: 10.1016/j.jallcom.2017.02.176

42. J. Singh, S. Mahesh, S. Roy, G. Kumar, D. Srivastava, G.K. Dey, N. Saibaba and I. Samajdar: Temperature dependence of work hardening in sparsely twinning zirconium, Acta Materialia, 123 (2017) 337-349. DOI: 10.1016/j.actamat.2016.10.049

43. N. Jahanzeb, J.-H. Shin, J. Singh, Y.-U. Heo and S.-H. Choi: Effect of microstructure on the hardness heterogeneity of dissimilar metal joints between 316L stainless steel and SS400 steel, Materials Science and Engineering A, 700 (2017) 338-350. DOI: 10.1016/j.msea.2017.06.002

44. G. Kumar, S. Balo, A. Dhoble, J. Singh, R. Singh, D. Srivastava, G.K. Dey and I. Samajdar: Through thickness deformation gradient in a part-pilgered zirconium tube: experimental measurements and numerical validation, Metallurgical and Materials Transactions A, 48 (2017) 2844-2857. DOI: 10.1007/s11661-017-4032-y

45. G. Kumar, A. Lodh, J. Singh, R. Singh, D. Srivastava, G.K. Dey and I. Samajdar: Experimental Characterization and Finite Element Modeling of Through Thickness Deformation Gradient in a Cold Rolled Zirconium Sheet, CIRP Journal of Manufacturing Science and Technology, 19 (2017) 176–190. DOI: 10.1016/j.cirpj.2017.09.002

46. J. Singh, S. Mahesh, S. Roy, G. Kumar, D. Srivastava, G.K. Dey, N. Saibaba and I. Samajdar: A Miniature Physical Simulator for Pilgering, Journal of Materials Processing Technology, 237 (2016) 126-138. DOI: 10.1016/j.jmatprotec.2016.06.009

47. G. Kumar, A.K. Kanjrla, A. Lodh, J. Singh, R. Singh, D. Srivastava, G.K. Dey, N. Saibaba, R.D. Doherty and I. Samajdar: Burst Ductility of Zirconium Clads: The Defining Role of Residual Stress, Metallurgical and Materials Transactions A, 47 (2016) 3882-3896. DOI: 10.1007/s11661-016-3526-3

48. J. Singh, S. Mahesh, G. Kumar, P. Pant, D. Srivastava, G.K. Dey, N. Saibaba and I. Samajdar: Deformation Twinning in Zirconium: Direct Experimental Observations and Polycrystal Plasticity Predictions, Metallurgical and Materials Transactions A, 46 (2015) 5058-5071. DOI: 10.1007/s11661-015-3085-z

49. J. Singh, S. Mahesh, G. Kumar, P. Pant, D. Srivastava, G.K. Dey, N. Saibaba and I. Samajdar: Texture Development and Plastic Deformation in a Pilgered Zircaloy-4 Tube, Metallurgical and Materials Transactions A, 46 (2015) 1927-1947. DOI: 10.1007/s11661-015-2807-6

50. G. Kumar, R. Singh, J. Singh, D. Srivastava, G.K. Dey and I. Samajdar: Defining the stages of annealing in a moderately deformed commercial Zirconium alloy, Journal of Nuclear Materials, 466 (2015) 243-252. DOI: 10.1016/j.jnucmat.2015.07.048

51. R. Kapoor, A. Sarkar, J. Singh, I. Samajdar and D. Raabe: Effect of strain rate on twinning in a Zr alloy, Scripta Materialia, 74 (2014) 72-75. DOI: 10.1016/j.scriptamat.2013.10.025