Publications

2022

  • Wiest, T., C.C. Seepersad, M.R. Haberman, 2022, “Robust Design of an Asymmetrically Absorbing Willis Acoustic Metasurface Subject to Manufacturing-Induced Dimensional Variations,” Journal of the Acoustical Society of America, vol. 151, pp. 216-231.

  • Allison, J., J. Pearce, J. Beaman, C.C. Seepersad, 2022, “Volumetric Fusion of Graphite-Doped Nylon 12 Powder with Radio Frequency Radiation,” Rapid Prototyping Journal, in press.

2021

  • Song, H., N.A. Rodriguez, C. C. Seepersad, R.H. Crawford, M. Chen, E.B. Duoss, 2021, “Development of a Variable Tensioning System to Reduce Separation Force in Large Scale Stereolithography,” Additive Manufacturing, Vol. 38, pp. 101816 (15 pages).

  • Sharpe, C., C.C. Seepersad, 2021, “Lattice Structure Optimization with Orientation-Dependent Material Properties,” Journal of Mechanical Design, Vol. 143, pp. 091708 (10 pages).

  • Uitz, O., P. Koirala, M. Tehrani, C.C. Seepersad, 2021, “Fast, Low-Energy Additive Manufacturing of Isotropic Parts via Reactive Extrusion,” Additive Manufacturing, Vol. 41, pp. 1-12.

  • Cortes, S. N. Cobo-Losey, M.R. Haberman, C.C. Seepersad, D. Kovar, 2021, “Stiffness and Energy Dissipation of Polymer Matrix Composites Containing Embedded Metallic Negative Stiffness Structures,” Experimental Mechanics, Vol. 61, pp. 843-858.

  • Oridate, A., M. Pryor, C.C. Seepersad, 2021, “Robot Motion Planner for Under-Constrained Trajectories with Part-Specific Geometric Variances,” IDETC/CIE Mechanisms and Robotics Conference, Virtual Conference, Paper No: DETC2021-71602.

  • Valdez, S., C.C. Seepersad, S. Kambampati, 2021, “A Framework for Interactive Structural Design Exploration,” IDETC/CIE Design Automation Conference, Virtual Conference, Paper No: DETC2021-71775.

  • Sassaman, D., J. Beaman, D. Kovar, M. Ide, C. Seepersad, 2021, “Geometry Limitations of Indirect Laser Sintering of Alumina,” Solid Freeform Fabrication Symposium, Austin, TX.

  • Koirala, P., O.L. Uitz, A.A. Oridate, C.C. Seepersad, and M. Tehrani, 2021, “Reactive Extrusion Additive Manufacturing of a Short Fiber Reinforced Thermoset Composite,” 36th Technical Conference of the American Society of Composites.

  • Leng, R., O. Uitz, Z. Ounaies, C. Seepersad, 2021, “Design and Characterization of a Multilayered Multifield-Actuated Polymer Unimorph,” ASME Conference on Smart Materials, Adaptive Structures, and Intelligent Systems, Paper No: SMASIS2021-68238.

2020

  • Seepersad, C.C., J. Allison, A. Dressler, B. Boyce, D. Kovar, 2020, “An Experimental Approach for Enhancing the Predictability of Mechanical Properties of Additively Manufactured Architected Materials with Manufacturing-Induced Variability,” in Uncertainty Quantification in Multiscale Materials Modeling (D. McDowell and Y. Wang, Eds.), Elsevier.

  • Phillips, T., J. Allison, C.C. Seepersad, J. Beaman, 2020, “Smart Manufacturing in Additive Manufacturing,” in Smart Manufacturing (M. Baldea, T.F. Edgar, M. Soroush, Eds.), Elsevier.

  • Sharpe, C., C.C. Seepersad, 2020, “Lattice Structure Optimization with Orientation-Dependent Material Properties,” IDETC/CIE Design Automation Conference, Virtual Conference, Paper No: ASME IDETC2020-22320.

  • Zhang, J., C. Sharpe, C.C. Seepersad, 2020, “Stress-Constrained Design of Functionally Graded Lattice Structures with Spline-Based Dimensionality Reduction,” Journal of Mechanical Design, Vol. 142, No. 9, pp. 091702 (13 pages).

  • Beaman, J.J., D.L. Bourell, C.C. Seepersad, D. Kovar, 2020, “Additive Manufacturing Review – Early Past to Current Practice,” ASME Journal of Manufacturing Science and Engineering, Vol. 142, No. 11, pp.110812 (20 pages).

2019

  • Allison, J., Sharpe, C. and Seepersad, C.C., 2019, “Powder Bed Fusion Metrology for Additive Manufacturing Design Guidance,” Additive Manufacturing, Vol. 25, pp.239-251.

  • Kershaw, T., S. Bhowmick, C.C. Seepersad, K. Holtta-Otto, 2019, “A Decision Tree Based Methodology for Evaluating Creativity in Engineering Design,” Frontiers in Psychology-Cognition, Vol. 10 (32), pp. 1-19.

  • Morris, C., L. Bekker, C. Spadaccini, M. Haberman, C.C. Seepersad, 2019, “Tunable Mechanical Metamaterial with Constrained Negative Stiffness for Improved Quasi-static and Dynamic Energy Dissipation,” Advanced Engineering Materials, Vol. 21, No. 7, p. 1900163.

  • Dressler, A.D., E.W. Jost, J.C. Miers, D.G. Moore, C.C. Seepersad, B.L. Boyce, 2019, “Heterogeneities Dominate Mechanical Performance of Additively Manufactured Metal Lattice Struts,” Additive Manufacturing, Vol. 28, pp. 692-703.

  • Sharpe, C., T. Wiest, P. Wang, C.C. Seepersad, 2019, “A Comparative Evaluation of Supervised Machine Learning Classification Techniques for Engineering Design Applications,” Journal of Mechanical Design, Vol. 141, pp. 121404 (12 pages).

  • Morris, C.B., M.R. Haberman, C.C. Seepersad, 2019, “Visualizing and Evaluating High-Dimensional Mappings of Sets of High Performance Designs,” ASME IDETC/CIE Design Automation Conference, Anaheim, California, Paper No: ASME IDETC2019-97722.

  • Sharpe, C., C.C. Seepersad, 2019, “Topology Design with Conditional Generative Adversarial Networks,” ASME IDETC/CIE Design Automation Conference, Anaheim, California, Paper No: ASME IDETC2019-97833.

  • Zhang, J.Z., C. Sharpe, C.C. Seepersad, 2019, “Stress-Constrained Design of Functionally Graded Lattice Structures with Spline-Based Dimensionality Reduction,” ASME IDETC/CIE Design Automation Conference, Anaheim, California, Paper No: ASME IDETC2019-97905.

2018

  • Camacho, D.D., P. Clayton, W.J. O’Brien, C. Seepersad, M. Juenger, R. Ferron, S. Salamone, 2018, “Applications of Additive Manufacturing in the Construction Industry – A Forward-Looking Review,” Automation in Construction, Vol. 89, pp. 110-119.

  • Debeau, D., C.C. Seepersad, M.R. Haberman, 2018, “Impact Behavior of Negative Stiffness Honeycombs,” Journal of Materials Research, Vol. 33, No. 3, pp. 290-299.

  • Morris, C., L. Bekker, M.R. Haberman, C.C. Seepersad, 2018, “Design Exploration of Reliably Manufacturable Materials and Structures with Applications to Negative Stiffness Metamaterials and Microstereolithography,” Journal of Mechanical Design, Vol. 140, No. 11, pp. 111415 (14 pages).

  • Morris, C., J. Cormack, M.R. Haberman, M. Hamilton, C.C. Seepersad, 2018, “Ultrasonic Characterization of the Complex Young’s Modulus of Polymer Parts Fabricated with Microstereolithography,” Rapid Prototyping Journal, Vol. 24, No. 7, pp. 1193-1202.

  • Morris, C., C.C. Seepersad, 2018, “Efficient Identification of Promising Regions in High-Dimensional Design Spaces with Multilevel Materials Design Applications,” ASME IDETC/CIE Design Automation Conference, Quebec City, Quebec, Canada, Paper No: DETC2018-85273.

  • Morris, C., C.C. Seepersad, 2018, “Design Exploration of Reliably Manufacturable Materials and Structures with Applications to a Microstereolithography System,” ASME IDETC/CIE Design Automation Conference, Quebec City, Quebec, Canada, Paper No: DETC2018-85172.

  • Sharpe, C., C.C. Seepersad, S. Watts, D. Tortorelli, 2018, “Design of Mechanical Metamaterials via Constrained Bayesian Optimization,” ASME IDETC/CIE Design Automation Conference, Quebec City, Quebec, Canada, Paper No: DETC2018-85270.

  • Wiest, T., C.C. Seepersad, M.R. Haberman, 2018, “Design Space Exploration in Sparse, Mixed Continuous/Discrete Spaces via Synthetically Enhanced Classification,” ASME IDETC/CIE Design Automation Conference, Quebec City, Quebec, Canada, Paper No: DETC2018-85274.

2017

  • Allison, J., C. Sharpe, C.C. Seepersad, 2017, "A Test Part for Evaluating the Accuracy and Resolution of a Polymer Powder Bed Fusion Process," Journal of Mechanical Design, Vol. 139, No. 10, p. 100902 (5 pages).

  • Cortes, S., J. Allison, C. Morris, M.R. Haberman, C.C. Seepersad, D. Kovar, 2017, “Design, Manufacture, and Quasi-static Testing of Metallic Negative Stiffness Structures within a Polymer Matrix,” Experimental Mechanics, Vol. 57, No. 8, pp. 1183-1191.

  • Pang, M.A., C.C. Seepersad, S. Landsberger, 2017, “The Development of a Freshman Engineering Research Program,” ASEE Annual Conference and Exposition, Columbus, OH.

  • Patrick, A.D., N.H. Choe, L.L. Martins, M. Borrego, M.R. Kendall, C.C. Seepersad, 2017, “A Measure of Affect towards Key Elements of Engineering Professional Practice,” ASEE Annual Conference and Exposition, Columbus, OH.

  • Sharpe, C., C. Morris, B. Goldsberry, C.C. Seepersad, M.R. Haberman, “Bayesian Network Structure Optimization for Improved Design Space Mapping for Design Exploration with Materials Design Applications,” ASME IDETC Design Automation Conference, Cleveland, OH, Paper No: DETC 2017-67643. Best Paper Award!

  • Morris, C. and C.C. Seepersad, 2017, “Identification of High Performance Regions of High-Dimensional Design Spaces with Materials Design Applications,” ASME IDETC Design Automation Conference, Paper No: DETC 2017-67769.

2016

  • Matthews, J., T. Klatt, C.C. Seepersad, M.R. Haberman, and D.W. Shahan, 2016, "Hierarchical Design of Negative Stiffness Metamaterials Using a Bayesian Network Classifier," Journal of Mechanical Design, Vol., 138, No. 4, p. 041404 (12 pages).

  • Putnam, N.H., K.J. Kinnevan, M.E. Webber, C.C. Seepersad, 2016, “Trucks off the Road: A Method for Assessing Economical Reductions of Logistical Requirements at Contingency Base Camps,” Engineering Management Journal, Vol. 28, No. 2, pp. 86-98.

  • Pang, M. and C.C. Seepersad, 2016, “Crowdsourcing the Evaluation of Design Concepts with Empathic Priming,” ASME IDETC Design Theory and Methodology Conference, Charlotte, NC, Paper No: DETC 2016-59417.

  • Morris, C., M. Haberman, and C.C. Seepersad, 2016, “A Set-Based Method for Multilevel Design of Materials and Structures with Manufacturing Uncertainty,” ASME IDETC Design Automation Conference, Charlotte, NC, Paper No: DETC 2016-59401. (A DAC Exemplary Paper (Top 10))

  • Prybutok, A., A.D. Patrick, M.J. Borrego, C.C. Seepersad, M.J. Kirisits, 2016, “Cross-Sectional Survey Study of Undergraduate Engineering Identity,” ASEE Annual Conference and Exposition, New Orleans, LA. (DOI: 10.18260/p.26610)

2015

  • Backlund, P., D.W. Shahan, and C.C. Seepersad, 2015, “Classifier-guided Sampling for Discrete Variable, Discontinuous Design Space Exploration: Convergence and Computational Performance, Engineering Optimization, Vol. 47, No. 5, pp. 579-600.

  • Correa, D.M., T.D. Klatt, S.A. Cortes, M.R. Haberman, D. Kovar, and C.C. Seepersad, 2015, “Negative Stiffness Honeycombs for Recoverable Shock Isolation,” Rapid Prototyping Journal, Vol. 21, No. 2, pp. 193-200.

  • Tilstra, A.H., P.B. Backlund, C.C. Seepersad, and K.L. Wood, 2015, “Principles for Designing Products with Flexibility for Future Evolution,” International Journal of Mass Customisation, Vol. 5, No. 1, pp. 22-54.

  • Backlund, P.B., C.C. Seepersad, and T. Kiehne, 2015, “All-Electric Ship Energy System Design using Classifier-Guided Sampling,” IEEE Transactions on Transportation Electrification, Vol. 1, No. 1, pp. 77-85.

  • Correa, D.M., C.C. Seepersad, M.R. Haberman, 2015, “Mechanical Design of Negative Stiffness Honeycomb Materials,” Integrating Materials and Manufacturing Innovation, Vol. 4, No. 1, pp. 1-11.

  • O’Rourke, J.M. and C.C. Seepersad, 2015, “Towards a Methodology for Systematically Generating Energy- and Materials-Efficient Concepts Using Biological Analogies,” Journal of Mechanical Design, Vol. 137, No. 9, p. 091101 (12 pages).

  • Telenko, C., J.M. O’Rourke, M.E. Webber, and C.C. Seepersad, 2015, “A Compilation of Design for Environment Guidelines,” Journal of Mechanical Design, Vol. 138, No. 2, p. 031102 (11 pages).

  • O’Rourke, J.M. and C.C. Seepersad, 2015, “The Importance of Contextual Factors in Determining the Greenhouse Gas Emission Impacts of Solar Photovoltaic Systems,” ASME IDETC Advances in Design Automation Conference, Boston, MA, Paper No: DETC2015-46471. (A DAC Exemplary Paper (Top 10))

  • Bashyam, S., J. Kuhn, and C.C. Seepersad, 2015, “A 3D Printing Vending Machine and Its Impact on the Democratization of 3D Printing on a College Campus,” ASME IDETC Design Education Conference, Boston, MA, Paper No: DETC2015-46470.

  • Kershaw, T.C., R.L. Peterson, M.A. McCarthy, A.Y. Young, C.C. Seepersad, P.T. Williams, K. Holtta-Otto, and S. Bhowmick, 2015, “A Cross-Sectional and Longitudinal Examination of the Development of Innovation Capability in Undergraduate Engineering Students,” ASME IDETC Design Education Conference, Boston, MA, Paper No: DETC2015-47650. Best Paper Award.

  • O’Rourke, J.M. and C.C. Seepersad, 2015, “Using Biology as a Model for Sustainability,” International Conference on Engineering Design (ICED), Milan, Italy.

2014

  • Fulcher, B.A., D.W. Shahan, M.R. Haberman, C.C. Seepersad, P.S. Wilson, 2014, “Analytical and Experimental Investigation of Buckled Beams as Negative Stiffness Elements for Passive Vibration and Shock Isolation,” Journal of Vibration and Acoustics, Vol. 136, No. 3, pp. 031009 (1-12).

  • Johnson, D.G., N. Genco, M.N. Saunders, P. Williams, C.C. Seepersad, K. Holta-Otto, 2014, “An Experimental Investigation of the Effectiveness of Empathic Experience Design for Innovative Concept Generation,” Journal of Mechanical Design, Vol. 136, No. 5, pp. 051009 (1-12).

  • Seepersad, C.C., 2014, “Challenges and Opportunities in Design for Additive Manufacturing,” 3D Printing and Additive Manufacturing, Vol. 1, No. 1, pp. 10-13.

  • Telenko, C. and C.C. Seepersad, 2014, “Probabilistic Graphical Modeling of Use Stage Energy Consumption: A Lightweight Vehicle Example,” Journal of Mechanical Design, Vol. 136, No. 10, pp. (101403)1-11.

  • Matthews, J., T. Klatt, C.C. Seepersad, M. Haberman, D. Shahan, 2014, “Bayesian Network Classifiers and Design Flexibility Metrics for Set-Based, Multiscale Design with Materials Design Applications, ASME IDETC Advances in Design Automation Conference, Buffalo, NY, Paper No: DETC2014-34436.

  • Kershaw, T., C.C. Seepersad, K. Holtta-Otto, P.T. Williams, A.P. Young, S. Bhowmick, M.A. McCarthy, 2014, “The Effects of the Undergraduate Curriculum and Individual Differences on Student Innovation Capabilities,” ASME IDETC Design Education Conference, Buffalo, NY, Paper No: DETC2014-35540.

  • Telenko, C. and C.C. Seepersad, 2014, “Scoping Usage Contexts and Scenarios in Eco-Design,” ASME IDETC Design for Manufacturing and the Life Cycle Conference, Buffalo, NY, Paper No: DETC2014-34846.

  • Green, M., C.C. Seepersad, and K. Holtta-Otto, 2014, “Crowd-sourcing the Evaluation of Creativity in Conceptual Design: A Pilot Study,” ASME IDETC Design Theory and Methodology Conference, Buffalo, NY, Paper No: DETC2014-34434.

  • Vaughan, M.R., C.C. Seepersad, R.H. Crawford, 2014, “Creation of Empathic Lead Users from Non-Users via Simulated Lead User Experiences,” ASME IDETC Design Theory and Methodology Conference, Buffalo, NY, Paper No: DETC2014-35052.

  • Kuhn, J. M. Green, S. Bashyam, C.C. Seepersad, 2014, “The Innovation Station: A 3D Printing Vending Machine for UT Austin Students,” Solid Freeform Fabrication Symposium, (D. L. Bourell, J. J. Beaman, R. H. Crawford, H. L. Marcus, and C. C. Seepersad, Eds.), Austin, TX.

  • Correa, D.M., T.D. Klatt, S.A. Cortes, M.R. Haberman, D. Kovar, and C.C. Seepersad, 2014, “Negative Stiffness Honeycombs for Recoverable Shock Isolation,” Solid Freeform Fabrication Symposium, (D. L. Bourell, J. J. Beaman, R. H. Crawford, H. L. Marcus, and C. C. Seepersad, Eds.), Austin, TX.

2013

  • Oman, S.K., I.Y. Tumer, K.L. Wood, and C.C. Seepersad, 2013, "A Comparison of Creativity and Innovation Metrics and Sample Validation Through In-Class Design Projects," Research in Engineering Design, Vol. 124, No. 1, pp. 65-92.

  • Shahan, D., P. Backlund, and C.C. Seepersad, 2013, "Classifier-Guided for Discrete Variable, Discontinuous Design Space Exploration," ASME IDETC Design Automation Conference, Portland, Oregon, Paper Number: DETC2013-13138.

  • O'Rourke, J. and C.C. Seepersad, 2013, "Examining Efficiency in BioInspired Design," ASME IDETC Design Theory and Methodology Conference, Portland, Oregon, Paper Number: DETC2013-13147.

  • Matthews, J., T. Klatt, C.C. Seepersad, M.R. Haberman, and D.W. Shahan, 2013, "Hierarchical Design of Composite Materials with Negative Stiffness Inclusions Using a Bayesian Network Classifier," ASME IDETC Design Automation Conference, Portland, Oregon, Paper Number: DETC2013-13128.

  • Telenko, C. and C.C. Seepersad, 2013, "Probabilistic Graphical Models for Representing Usage Context in Environmentally Conscious Design," ASME IDETC Design Automation Conference, Portland, Oregon, Paper Number: DETC2013-13113.

  • Klatt, T., M. Haberman, and C.C. Seepersad, 2013, "Selective Laser Sintering of Negative Stiffness Mesostructures for Recoverable, Nearly-Ideal Shock Isolation," Solid Freeform Fabrication Symposium, (D. L. Bourell, J. J. Beaman, R. H. Crawford, H. L. Marcus, and C. C. Seepersad, Eds.), Austin, TX.

2012

  • Genco, N., Holtta-Otto, K., and C.C. Seepersad, 2012, "An Experimental Investigation of the Innovation Capabilities of Undergraduate Engineering Students," Journal of Engineering Education, Vol. 101, No. 1, pp. 60-81.

  • Kashdan, L., C.C. Seepersad, M. Haberman, and P. Wilson, 2012, "Design, Fabrication, and Evaluation of Negative Stiffness Elements Using Selective Laser Sintering," Rapid Prototyping Journal, Vol. 18, No. 3, pp. 194-200.

  • Backlund, P.B., D.W. Shahan, C.C. Seepersad, 2012, “A Comparative Study of the Scalability of Alternative Metamodeling Techniques,” Engineering Optimization, Vol. 44, No. 7, pp. 767-786.

  • Shahan, D. and C.C. Seepersad, 2012, "Bayesian Network Classifiers for Set-Based Collaborative Design," Journal of Mechanical Design, Vol. 134, No. 7, 071001 (14 pages).

  • Telenko, C. and C.C. Seepersad, 2012, "A Comparison of the Energy Efficiency of Selective Laser Sintering and Injection Molding of Nylon Parts," Rapid Prototyping Journal, Vol. 18, No. 6, pp. 472-481.

  • Tilstra, A.H., C.C. Seepersad, and K.L. Wood, 2012, "A high-definition design structure matrix (HDDSM) for the quantitative assessment of product architecture," Journal of Engineering Design, Vol. 23, No. 10-11, pp. 767-789.

  • Putnam, N.H., C.C. Seepersad, and M.E. Webber, 2012, "Designing Resource-Efficient Military Base Camps from a Holistic View—Interactions and Sensitivity," ASME IDETC Design Automation Conference, Chicago, IL, Paper Number: DETC2012-70960.

  • Telenko, C. and C.C. Seepersad, 2012, "Probabilistic Graphical Models as Tools for Evaluating the Impact of Usage Context on the Environmental Performance of Products," ASME IDETC Design for Manufacturing and the Life Cycle Conference, Chicago, IL, Paper Number: DETC2012-71160.

  • Backlund, P., D. Shahan, and C.C. Seepersad, 2012, "A Classifier-Guided Sampling Method for Computationally Expensive, Discrete-Variable, Discontinuous Design Problems,: ASME IDETC Design Automation Conference, Chicago, IL, Paper Number: DETC2012-70353.

  • Backlund, Peter B., C. C. Seepersad, and T. M. Kiehne, 2012, "A System-Level Design Framework for All-Electric Ship Thermal Systems," Proceedings of the ASNE Electric Machines Technology Symposium, Philadelphia, PA, May 23-24, 2012.

  • Williams, C. and C.C. Seepersad, 2012, "Design for Additive Manufacturing Curriculum: A Problem- and Project-Based Approach," Solid Freeform Fabrication Symposium, (D. L. Bourell, J. J. Beaman, R. H. Crawford, H. L. Marcus, and C. C. Seepersad, Eds.), Austin, TX.

  • Seepersad, C.C., T. Govett, K. Kim, M. Lundin, D. Pinero, 2012, "A Designer's Guide for Dimensioning and Tolerancing SLS Parts," Solid Freeform Fabrication Symposium, (D. L. Bourell, J. J. Beaman, R. H. Crawford, H. L. Marcus, and C. C. Seepersad, Eds.), Austin, TX.

2011

  • Maheshwaraa, U. and C.C. Seepersad, 2011, “Topology Design and Freeform Fabrication of Deployable Structures with Lattice Skins,” Rapid Prototyping Journal, Vol. 17, No. 1, pp. 5-16.

  • Saunders, M., C.C. Seepersad, and K. Holtta-Otto, 2011, "The Characteristics of Innovative Mechanical Products," ASME Journal of Mechanical Design, Vol. 133, No. 2, pp. 021009-1-9.

  • Genco, N., K. Holtta-Otto and C. C. Seepersad, 2011, "Factors that Influence the Creativity of Engineering Students," ASEE Annual Conference and Exposition, Vancouver, BC.

  • Genco, N., D. Johnson, K. Holtta-Otto and C. C. Seepersad, 2011, "A Study of the Effectiveness of the Empathic Experience Design Creativity Technique," ASME IDETC Design Theory and Methodology Conference, Washington, DC, Paper Number: DETC2011-021711.

  • Shahan, D. and C. C. Seepersad, 2011, "Sequential Sampling with Kernel-Based Bayesian Network Classifiers," ASME IDETC Design Automation Conference, Washington, DC, Paper Number: DETC2011/48318.

  • Shahan, D., B. Fulcher, C.C. Seepersad, M.R. Haberman, and P.S. Wilson, 2011, "Robust Design of Negative Stiffness Elements Fabricated by Selective Laser Sintering," Solid Freeform Fabrication Symposium, (D. L. Bourell, J. J. Beaman, R. H. Crawford, H. L. Marcus, and C. C. Seepersad, Eds.), Austin, TX.

  • Telenko, C. and C.C. Seepersad, 2011, "A Comparative Evaluation of Energy Consumption of Selective Laser Sintering and Injection Molding of Nylon Parts," Solid Freeform Fabrication Symposium, (D. L. Bourell, J. J. Beaman, R. H. Crawford, H. L. Marcus, and C. C. Seepersad, Eds.), Austin, TX.

  • Gully, B.H., M.E. Webber, and C.C. Seepersad, 2011, "Shaft Motor-Generator Design Assessment for Increased Operational Efficiency in Container Ships," ASME 2011 5th International Conference on Energy Sustainability, Washington, DC, Paper Number: ES2011-54475.

  • Putnam, N.H., M.E. Webber, and C.C. Seepersad, 2011, "Trucks off the Road: A Volumetric Framework for Evaluating Energy Technologies for Forward Operating Military Base Camps," ASME 2011 5th International Conference on Energy Sustainability, Washington, DC, Paper Number: ES2011-54459.

  • O'Rourke, J.M. and C.C. Seepersad, 2011, "A Methodology for Identifying Factors that Contribute to the Sustainability of Bioinspired Engineered Systems," ASME 14th International Mechanical Engineering Congress and Exposition (IMECE 2011), Denver, Colorado, Paper Number: IMECE2011-62605.

2010

  • Panchal, J., D.L. McDowell, H.-J. Choi, C.C. Seepersad, J.K. Allen, F. Mistree, 2010, Integrated Design of Multiscale, Multifunctional Materials and Products, Elsevier (Butterworth-Heinemann), Burlington, MA. (Available on Amazon.com)

  • Shahan, D. and C.C. Seepersad, 2010, “Implications of Alternative Multilevel Design Methods for Design Process Management,” Concurrent Engineering: Research and Applications, Vol. 18, No. 1, pp. 5-18.

  • Telenko, C. and C.C. Seepersad, 2010, “A Methodology for Identifying Environmentally Conscious Guidelines for Product Design,” ASME Journal of Mechanical Design, Vol. 132, No. 9, pp. 091009.

  • Durand, J., C. Telenko* and C. C. Seepersad, 2010, "How Does Modularity Affect Green Design?" ASME IDETC Design for Manufacturing and the Life Cycle Conference, Montreal, Quebec, Paper Number: DETC2010-28760.

  • Genco, N., K. Holtta-Otto and C.C. Seepersad, 2010, “An Experimental Investigation of the Innovation Capabilities of Engineering Students,” ASEE Annual Conference and Exposition, Louisville, KY. Best Paper Award for ASEE Design in Engineering Education Division and Professional Interest Council II.

  • Green, M., C.C. Seepersad, and K. Holtta-Otto, 2010, “Extreme Experience Interviews for Innovative Designs: Classroom Assessment of a New Needs-Gathering Method,” ASEE Annual Conference and Exposition, Louisville, KY.Best Paper Award for ASEE Mechanical Engineering Division.

  • Gully, B.H., M.E. Webber, and C.C. Seepersad, 2010, "A Comparative Analysis of Wind Propulsion Systems for Ocean-Going Vessels," ASME International Mechanical Engineering Congress and Exposition, Vancouver, British Columbia, Canada, Paper Number: IMECE2010-38395.

  • Gully, B.H., M.E. Webber, C.C. Seepersad, and R.C. Thompson, 2010, "Integrating Renewable Technologies to Reduce Large Ship Fuel Consumption," ASME 4th International Conference on Energy Sustainability, Phoenix, Arizona, Paper Number: ES2010-90294.

  • Holtta-Otto, K., M.N. Saunders, and C.C. Seepersad, 2010, “The Characteristics of Innovative, Medical Devices,” ASME Design of Medical Devices Conference, Minneapolis, MN, Paper Number: DMD2010-3857.

  • Shahan, D. and C. C. Seepersad, 2010, "Bayesian Network Classifiers for Set-Based Collaborative Design," ASME IDETC Advances in Design Automation Conference, Montreal, Quebec, Paper Number: DETC2010/28724.

  • Srivathsavai, R., N. Genco, K. Holtta-Otto, and C.C. Seepersad, 2010, "Study of Existing Metrics Used in Measurement of Ideation Effectiveness," ASME IDETC Design Theory and Methodology Conference, Montreal, Quebec, Paper Number: DETC2010-28802.

  • Telenko, C. and C.C. Seepersad, 2010, “Assessing Energy Requirements and Material Flows of Selective Laser Sintering of Nylon Parts,” Solid Freeform Fabrication Symposium, (D. L. Bourell, J. J. Beaman, R. H. Crawford, H. L. Marcus, and C. C. Seepersad, Eds.), Austin, TX.

  • Tilstra, A., C. C. Seepersad and K. L. Wood, 2010, "The Repeatability of High Definition Design Structure Matrix (HDDSM) Models for Representing Product Architecture," ASME IDETC Design Theory and Methodology Conference, Montreal, Quebec, Paper Number: DETC2010-28717.

2009

  • Keese, D. A., C. C. Seepersad and K. L. Wood, 2009, “Product Flexibility Measurement with Enhanced Change Modes and Effects Analysis (CMEA),” International Journal of Mass Customization, Vol. 3, No. 2, pp. 115-145.

  • Green, M.G., D. Jensen, C.C. Seepersad, K.L. Wood, 2009, “Design for Frontier Contexts: Classroom Assessment of a New Design Methodology with Humanitarian Applications,” International Journal of Engineering Education, Vol. 25, No. 5, pp. 1029-1045.

  • Ely, G.R. and C.C. Seepersad, 2009, “"A Comparative Study of Metamodeling Techniques for Predictive Process Control of Welding Applications," International Manufacturing Science and Engineering Conference, West Lafayette, Indiana, ASME, Paper Number: MSEC2009-84189.

  • Ferguson, S., A. Tilstra, C. C. Seepersad and K. L. Wood, 2009, "Development of a Changeable Airfoil Optimization Model for Use in Multidisciplinary Design of Unmanned Aerial Vehicles," ASME IDETC Advances in Design Automation Conference, San Diego, CA, Paper Number: DETC2009-87482.

  • Fey, N.P., B.J. South, C.C. Seepersad, and R.R. Neptune, 2009, “Topology Optimization and Freeform Fabrication Framework for Developing Prosthetic Feet,” Solid Freeform Fabrication Symposium, (D. L. Bourell, J. J. Beaman, R. H. Crawford, H. L. Marcus, and C. C. Seepersad, Eds.), Austin, TX.

  • Gully, B.H., M.E. Webber, C.C. Seepersad, R.C. Thompson, 2009, “Energy Storage Analysis to Increase Large Ship Fuel Efficiency,” 2009 ASME Energy Sustainability Conference, San Francisco, CA, Paper Number: ES2009-90440.

  • Kashdan, L., C.C. Seepersad, M. Haberman, and P.Wilson, 2009, “Design, Fabrication, and Evaluation of Negative Stiffness Elements,” Solid Freeform Fabrication Symposium, (D. L. Bourell, J. J. Beaman, R. H. Crawford, H. L. Marcus, and C. C. Seepersad, Eds.), Austin, TX.

  • Putnam, N. H., D. D. Jensen, K. L. Wood and C. C. Seepersad, 2009, "A Function-Based Strategy for Analysis of Energy Systems in Transportation Vehicles," ASME IDETC Advances in Design Automation Conference, San Diego, CA, Paper Number: DETC2009-87474.

  • Saunders, M. N., C. C. Seepersad and K. Holtta-Otto, 2009, "The Characteristics of Innovative, Mechanical Products," ASME IDETC Design Theory and Methodology Conference, San Diego, CA, Paper Number: DETC2009-87382 (Best Paper Award).

  • Shah, S. E., J. C. Lee, C. Rios-Perez and C. C. Seepersad, 2009, "Comparison of Analytical and Computational Thermal Models for Gas Metal Arc Braze Welding," ASME Summer Heat Transfer Conference, San Francisco, CA, Paper Number: HT2009-88491.

  • Shahan, D. and C. C. Seepersad, 2009, "Bayesian Networks for Set-Based Collaborative Design," ASME IDETC Advances in Design Automation Conference, San Diego, CA, Paper Number: DETC2009-87541.

  • Telenko, C., C. C. Seepersad and M. E. Webber, 2009, "A Method for Developing Design for Environment Guidelines for Future Product Design," ASME IDETC Design for Manufacturing and the Life Cycle Conference, San Diego, CA, Paper Number: DETC2009-87389.

  • Tilstra, A. H., C. C. Seepersad and K. L. Wood, 2009, "Analysis of Product Flexibility for Future Evolution Based on Design Guidelines and a High-Definition Design Structure Matrix," ASME IDETC Advances in Design Automation Conference, San Diego, CA, Paper Number: DETC2009-87118.

  • Tilstra, A.H., C.C. Seepersad and K.L. Wood, 2009, “Motivation and Method for Distributed Modeling of a Component DSM,” 11th International Design Structure Matrix Conference, Greenville, SC.

2008

  • Backlund, P., J. Lee, S. Shah, C.C. Seepersad, J. Howell, E. Taleff, and M. Prime, 2008, "Thermal Modeling and Experimentation for Residual Stress Prediction in Braze-Welded Beryllium via a Surrogate CuZn10 Alloy," IRCS-8: The Eighth International Conference on Residual Stresses, Denver, CO.

  • Gupta, G. and C. C. Seepersad, 2008, "Topology Design of Compliant Cellular Structures with Contact-Enabled, Graded Stiffness," 49th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Schaumburg, IL, Paper Number: AIAA-2008-2262.

  • Keese, D., C.C. Seepersad, K.L. Wood, 2008, "Product Flexibility Measurement with Enhanced Change Modes and Effects Analysis (CMEA)," International Journal of Mass Customisation, in press.

  • Madhavan, K., D. Shahan, C. C. Seepersad, D. A. Hlavinka and W. Benson, 2008, "An Industrial Trial of a Set-Based Approach to Collaborative Design," ASME IDETC/CIE Advances in Design Automation Conference, New York, NY, Paper Number: DETC2008/49953.

  • Seepersad, C. C., J. K. Allen, D. L. McDowell and F. Mistree, 2008, "Multifunctional Topology Design of Cellular Material Structures," ASME Journal of Mechanical Design, Vol. 130, No. 3, pp. 031404-1-13.

  • Telenko, C., C. C. Seepersad and M. E. Weber, 2008, "A Compilation of Design for Environment Principles and Guidelines," ASME IDETC/CIE, Design for Manufacturing and the Life Cycle Conference, New York, NY, Paper Number: DETC2008/49651.

  • Tilstra, A. H., P. B. Backlund, C. C. Seepersad and K. L. Wood, 2008, "Industrial Case Studies in Product Flexibility for Future Evolution: An Application and Evaluation of Design Guidelines," ASME IDETC/CIE Design Theory and Methodology Conference, New York, NY, Paper Number: DETC2008/49370.

2007

  • Howell, J., F. Franca, and C. C. Seepersad (Editors), 2007, Proceedings of the Pan-American Science Institute on Predictive Process Dynamics in Manufacturing, Porto Allegre, Brazil, June 2007.

  • Keese, D.A., A. Tilstra, C. C. Seepersad, and K. Wood, 2007, "Empirically-Derived Principles for Designing Products with Flexibility for Future Evolution," ASME IDETC/CIE Design Theory and Methodology Conference, Las Vegas, NV. Paper Number: DETC2007-35695.

  • Lin, J. and C. C. Seepersad, 2007, "Empathic Lead Users: The Effects of Extraordinary User Experiences on Customer Needs Analysis and Product Redesign," ASME IDETC/CIE Design Theory and Methodology Conference, Las Vegas, NV. Paper Number: DETC2007-35302.

  • Maheshwaraa, U., C. C. Seepersad and D. L. Bourell, 2007, "Design and Freeform Fabrication of Deployable Structures with Lattice Skins," Rapid Prototyping Journal, Vol. 13, No. 4, pp. 213-225.

  • Maheshwaraa, U., C. C. Seepersad, and D.L. Bourell, 2007, "Topology Design and Freeform Fabrication of Deployable Structures with Lattice Skins," Solid Freeform Fabrication Symposium (D. L. Bourell, J. J. Beaman, R. H. Crawford, H. L. Marcus, C. C. Seepersad and K. L. Wood, Eds.), Austin, TX.

  • Rios, O., A. Hulse, G. Krishnamoorthy, L. Koran, B. Gully, C. C. Seepersad, and D. Tesar, 2007, "Task-Based Configuration Management of Modular Robotic Manipulators," ASME IDETC/CIE 6th International Conference on Multibody Systems, Nonlinear Dynamics, and Control, Las Vegas, NV. Paper Number: DETC2007-34499.

  • Shahan, D., K. Madhavan, and C. C. Seepersad, 2007, "The Implications of Alternative Multiscale Design Methods for Design Process Management," International Conference on Engineering Design, Paris France.

  • Seepersad, C. C., D. Shahan, and K. Madhavan, 2007, "Multiscale Design for Solid Freeform Fabrication," Solid Freeform Fabrication Symposium (D. L. Bourell, J. J. Beaman, R. H. Crawford, H. L. Marcus, C. C. Seepersad and K. L. Wood, Eds.), Austin, TX.

  • Xiao, A., C. C. Seepersad, J. K. Allen, D. W. Rosen and F. Mistree, 2007, "Design for Manufacturing: Application of Multidisciplinary Decision-Making Methodology," Engineering Optimization, Vol. 39, No. 4, pp. 429-451.

2006

  • Allen, J. K., C. C. Seepersad, H. J. Choi and F. Mistree, 2006, "Robust Design for Multidisciplinary and Multiscale Applications," ASME Journal of Mechanical Design, Vol. 128, No. 4, pp. 832-843.

  • Allen, J. K., C. C. Seepersad and F. Mistree, 2006, "Robust Design with Applications to Multidisciplinary and Multiscale Systems: A Survey," 7th World Congress on Computational Mechanics, Los Angeles, CA, July 16-22.

  • Carlos, S., K. Madhavan and C. C. Seepersad, 2006, "A Flexibility-Based Approach to Distributed Collaboration in Multiscale Design," 7th World Congress on Computational Mechanics, Los Angeles, CA, July 16-22.

  • Carlos, S., K. Madhavan, G. Gupta, D. A. Keese, U. Maheshwaraa and C. C. Seepersad, 2006, "A Flexibility-Based Approach to Collaboration in Multiscale Design," 11th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Portsmouth, VA. AIAA-2006-7063.

  • Green, M. G., J. S. Linsey, C. C. Seepersad and K. L. Wood, 2006, "Design for Frontier Contexts: Classroom Assessment of a New Design Methodology with Humanitarian Applications," ASEE Annual Conference and Exposition (R. J. Eggert, Ed.), Chicago, IL.

  • Green, M. G., J. S. Linsey, C. C. Seepersad and K. L. Wood, 2006, "Frontier Design: A Product Usage Context Method," ASME IDETC/CIE Design Theory and Methodology Conference, Philadelphia, PA. Paper Number: DETC2006-99608.

  • Gupta, G., J. Tan and C. C. Seepersad, 2006, "Design and Freeform Fabrication of Compliant Cellular Materials with Graded Stiffness," Solid Freeform Fabrication Symposium (D. L. Bourell, J. J. Beaman, R. H. Crawford, H. L. Marcus, C. C. Seepersad and K. L. Wood, Eds.), Austin, TX.

  • Holsonback, C., T. Webb, T. Kiehne and C. C. Seepersad, 2006, "System-Level Modeling and Optimal Design of an All-Electric Ship Energy Storage Module," Electric Machines Technology Symposium, Philadelphia, PA. May 21-24. American Society of Naval Engineers.

  • Keese, D. A., N. P. Takawale, C. C. Seepersad and K. L. Wood, 2006, "An Enhanced Change Modes and Effects Analysis (CMEA) Tool for Measuring Product Flexibility with Applications to Consumer Products," ASME IDETC/CIE Advances in Design Automation Conference, Philadelphia, PA. Paper Number: DETC2006-99478.

  • Maheshwaraa, U., C. Tradd, D. L. Bourell and C. C. Seepersad, 2006, "Design and Freeform Fabrication of Deployable Structures with Lattice Skins," Solid Freeform Fabrication Symposium (D. L. Bourell, J. J. Beaman, R. H. Crawford, H. L. Marcus, C. C. Seepersad and K. L. Wood, Eds.), Austin, TX.

  • Qian, Z., C. C. Seepersad, V. R. Joseph, J. K. Allen and C. F. J. Wu, 2006, "Building Surrogate Models Based on Detailed and Approximate Simulations," ASME Journal of Mechanical Design, Vol. 128, No. 4, pp. 668-677.

  • Qureshi, A., J. T. Murphy, B. Kuchinsky, C. C. Seepersad, K. L. Wood and D. D. Jensen, 2006, "Principles of Product Flexibility," ASME IDETC/CIE Advances in Design Automation Conference, Philadelphia, PA. Paper Number: DETC2006-99583.

  • Schmidt, K., M. Markey and C. C. Seepersad, 2006, "Preparing New Engineering Faculty for the Classroom: A Dialogue on Faculty Development Efforts," ASEE Annual Conference and Exposition, Chicago, IL.

  • Seepersad, C. C., M. Green and K. Schmidt, 2006, "Learning Journals as a Cornerstone for Effective Experiential Learning in Undergraduate Engineering Design Courses," ASEE Annual Conference and Exposition (R. J. Eggert, Ed.), Chicago, IL.

  • Seepersad, C. C., J. K. Allen, D. L. McDowell and F. Mistree, 2006, "Multifunctional Topology Design of Cellular Material Structures," ASME IDETC/CIE Advances in Design Automation Conference, Philadelphia, PA. Paper No: DETC2006-99373.

  • Seepersad, C.C., J. K. Allen, D. L. McDowell, and F. Mistree, 2006, "Robust Design of Cellular Materials with Topological and Dimensional Imperfections," ASME Journal of Mechanical Design, Vol. 128, No. 6, pp. 1285-1297.

  • Seepersad, C. C., K. Pedersen, J. Emblemsvag, R. R. Bailey, J. K. Allen and F. Mistree, 2006, "The Validation Square: How Does One Verify and Validate a Design Method?," Decision-Based Design: Making Effective Decisions in Product and Systems Design (W. Chen, K. Lewis and L. Schmidt, Eds.), ASME Press, NY.

  • Skiles, S. M., V. Singh, J. Krager, C. C. Seepersad, K. L. Wood and D. D. Jensen, 2006, "Adapted Concept Generation and Computational Techniques for the Application of a Transformer Design Theory," ASME IDETC/CIE Advances in Design Automation Conference, Philadelphia, PA. Paper Number: DETC2006-99584.

2005

  • Fernandez, M. G., C. C. Seepersad, D. W. Rosen, J. K. Allen, and F. Mistree, 2005, "Decision Support in Concurrent Engineering – The Utility-Based Selection Decision Support Problem," Concurrent Engineering: Research and Applications (CERA), Vol. 13, No. 1, pp. 13-28.

  • Seepersad, C. C., R. S. Kumar, J. K. Allen, F. Mistree, and D. L. McDowell, 2005, "Multifunctional Design of Prismatic Cellular Materials," Journal of Computer-Aided Materials Design, Vol. 11, No. 2-3, pp. 163-181.

  • Seepersad, C. C., F. Mistree and J. K. Allen, 2005, "Designing Evolving Families of Products Using the Utility-Based Compromise Decision Support Problem," Inaugural Issue of the International Journal of Mass Customization, Vol. 1, No. 1, pp. 37-64.

  • Qian, Z., C. C. Seepersad, V. R. Joseph, J. K. Allen and C. F. J. Wu, 2005, "A New Statistical Method for Integrated Analysis of Detailed and Approximate Simulations," Proceedings of the American Statistical Association, Alexandria, VA. American Statistical Association.

  • Seepersad, C. C., J. K. Allen, D. L. McDowell and F. Mistree, 2005, "Robust Design of Cellular Materials with Topological and Dimensional Imperfections," ASME IDETC/CIE Advances in Design Automation Conference, Long Beach , CA. Paper Number: DETC2005/DAC-85061.

  • Green, M. G., J. Tan, J. S. Linsey, C. C. Seepersad, K. L. Wood, 2005, "Product Usage Context Effects on Product Preferences," ASME IDETC/CIE Design Theory and Methodology Conference, Long Beach, CA. Paper Number: DETC2005/DTM-85438.

  • Seepersad, C. C., J. K. Allen, D. L. McDowell, and F. Mistree, 2005, "Why Do We Need Multiobjective Methods in Materials Design? Insights from the Design of Multifunctional Cellular Materials," International Conference on Advanced Materials Design and Development, Goa , India .

2004

  • Seepersad, C. C., 2004, "A Robust Topological Preliminary Design Exploration Method with Materials Design Applications," Ph.D. Dissertation, G. W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA.

  • Seepersad, C. C., B. M. Dempsey, J. K. Allen, F. Mistree and D. L. McDowell, 2004, "Design of Multifunctional Honeycomb Materials," AIAA Journal, Vol. 42, No. 5, pp. 1025-1033.

  • Qian, Z., C. C. Seepersad, V. R. Joseph, C. F. J. Wu and J. K. Allen, 2004, "Building Surrogate Models Based on Detailed and Approximate Simulations," ASME IDETC/CIE Advances in Design Automation Conference, Salt Lake City, UT. Paper Number: DETC2004/DAC-57486.

  • Kumar, R. S., A.-J. Wang, C. C. Seepersad, B. M. Dempsey, J. K. Allen, F. Mistree and D. L. McDowell, 2004, "Design of Multifunctional Materials," International Conference on Heterogeneous Material Mechanics, Chongqing University , CHINA .

  • Seepersad, C. C., M. G. Fernandez, J. H. Panchal, H.-J. Choi, J. K. Allen, D. L. McDowell and F. Mistree, 2004, "Materials Design: A Systems-Based Approach," ASME IDETC/CIE Symposium on Integration of Materials Microstructure and Chemistry in Multidisciplinary Design Optimization, Salt Lake City , UT. Paper Number: DETC2004-57641.

  • Seepersad, C. C., M. G. Fernandez, J. H. Panchal, H.-J. Choi, J. K. Allen, D. L. McDowell and F. Mistree, 2004, "Foundations for a Systems-Based Approach for Materials Design," 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Albany , NY . Paper Number: AIAA-2004-4300.

1999-2003

  • Seepersad, C. C., J. K. Allen, D. L. McDowell and F. Mistree, 2003, "Robust Topological Design of Cellular Materials," ASME IDETC/CIE Advances in Design Automation Conference, Chicago , IL . Paper Number: DETC2003/DAC-48772.

  • Hernandez, G., C. C. Seepersad, J. K. Allen and F. Mistree, 2002, "A Method for Interactive Decision-Making in Collaborative, Distributed Engineering Design," International Journal of Agile Manufacturing Systems, Vol. 5, No. 2, pp. 47-65.

  • Hernandez, G., C. C. Seepersad and F. Mistree, 2002, "Designing for Maintenance: A Game Theoretic Approach," Engineering Optimization, Vol. 34, No. 6, pp. 561-577.

  • Mistree, F., C. C. Seepersad, B. M. Dempsey, D. L. McDowell and J. K. Allen, 2002, "Robust Concept Exploration Methods in Materials Design," 9th AIAA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Atlanta, GA. Paper Number: AIAA-2002-5568.

  • Seepersad, C. C., F. S. Cowan, M. K. Chamberlain and F. Mistree, 2002, "Strategic Design: Leveraging and Innovation for a Changing Marketplace," International Conference on Engineering Design, King's College, London , pp. 3-20.

  • Seepersad, C. C., B. M. Dempsey, J. K. Allen, F. Mistree and D. L. McDowell, 2002, "Design of Multifunctional Honeycomb Materials," 9th AIAA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Atlanta , GA. Paper Number: AIAA-2002-5626.

  • Seepersad, C. C., F. Mistree and J. K. Allen, 2002, "A Quantitative Approach for Designing Multiple Product Platforms for an Evolving Portfolio of Products," ASME DETC/CIE Advances in Design Automation Conference, Montreal, Canada. Paper Number: DETC2002/DAC-34096.

  • Fernandez, M. G., C. C. Seepersad, D. W. Rosen, J. K. Allen and F. Mistree, 2001, "Utility-Based Decision Support for Selection in Engineering Design," ASME DETC/CIE Advances in Design Automation Conference, Pittsburgh, PA. Paper Number: DETC2001/DAC-21106.

  • Simpson, T. W., C. C. Seepersad and F. Mistree, 2001, "Balancing Commonality and Performance within the Concurrent Design of Multiple Products in a Product Family," Concurrent Engineering: Research and Applications (CERA), Vol. 9, No. 3, pp. 177-190.

  • Seepersad, C.C., 2001, "The Utility-Based Compromise Decision Support Problem with Applications in Product Platform Design," M.S. Thesis, G.W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA.

  • Hernandez, G., C. Conner Seepersad and F. Mistree, 2000, "Commonalizing Subsystem Components to Facilitate Maintenance: A Game Theoretic Approach," 8th AIAA/NASA/USAF/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Long Beach , CA . Paper Number: AIAA 2000-4806.

  • Seepersad, C. C., G. Hernandez and J. K. Allen, 2000, "A Quantitative Approach to Determining Product Platform Extent," ASME DETC/CIE Advances in Design Automation Conference, Baltimore , MD. Paper Number: DETC2000/DAC-14288.

  • (Seepersad) Conner, C. G., J. P. DeKroon and F. Mistree, 1999, "A Product Variety Tradeoff Evaluation Method for a Family of Cordless Drill Transmissions," ASME DETC/CIE Advances in Design Automation Conference, Las Vegas, NV. Paper Number: DETC99/DAC-8625.