[논문 2025]
23[SCI] Combined elastoplastic finite element method and tensile test for flow characterization of representative cold forging materials and their flow patterns, Man Soo Joun, Hyeon Min Lee, Suk Hwan Chung, Wan Jin Chung, Seok Moo Hong, Materials & Design, 2025 (Processing)
22[SCI] Determination of Damage Constant and Critical Damage by the Combined Experiment and FEM Using the Reference Processes, B. Hong, H. Lee,S. Hong ,M.Metals 2025, 15(12), 1376; https://doi.org/10.3390/met15121376
21[SCOPUS] Prediction of forming results based on the distribution of design variables for preforms in automotive hub bearing processes, S,R, Lee, M.S. Oh, S. Hong,ICPMMT2025 :https://iopscience.iop.org/article/10.1088/1742-6596/3144/1/012012/meta
20[SCOPUS]Robust design optimization of die dimensional tolerances to minimize underfill in bearing hubs, The 9th ICPMMT, 2024, M.S. Oh, S,R, Lee, S. Hong, ICPMMT2025 https://iopscience.iop.org/article/10.1088/1742-6596/3144/1/012008/meta
19[KCI] Ansys apdl과 Point Cloud Meshing 기반 반도체 Probe Card의 열-구조 연성해석, 한국정밀학회, 김성훈, 오민성, 홍석무 [accepted]
18 [KCI] 이미지 전처리 및 시각화 기법이 머신러닝 기반 너트 불량 예측 알고리즘의 예측 정확도에 미치는 영향 분석,박성현, 이사랑, 홍석무 [accepted]
17[KCI] 토마스 케이블 처짐 개선, 김민제, 오민성, 황순재, 홍석무 [심사중]
16[KCI] FSW 공정 변수에 따른 Al1050의 온도 및 기계적 특성 분석, 이강찬, 홍석무[accepted]
15[SCI] Determination of damage constant and critical damage by the combined experiment and FEM method using the reference processes, Boseung Hong, Hyeonmin Lee, Seokmoo Hong, Mansoo Joun, Metals, 2025, https://doi.org/10.3390/met15121376
14[SCOPUS]Flow behaviors of various metallic materials under tensile load The 9th ICPMMT, 2025
13[KCI] 열-전자기 연성해석을 통한 펠티어 모듈 시뮬레이션 및 실험을 통한 검증, 황순재, 홍석무, 한국산학기술학회[확정]
12[KCI] JSTAMP Remesh 기법을 활용한 다단 딥드로잉-아이어닝 공정의 solid 메시 품질 향상 및 해석 결과 분석, 이사랑, 홍석무, 한국산학기술학회지[확정]
11[KCI] 디지털 이미지 상관 기법(DIC)를 이용한 고속 인장 시험에서 변형률 속도 측정에 미치는 표점 거리의 영향 분석,이상민,홍석무,소성가공학회, vol.34, no.6, 2025, 10.5228/KSTP.2025.34.6.271
10[KCI] 링크 포머를 이용한 이차 연료전지 셀 캡의 단조 성형성 향상에 대한 연구, 이상민,홍석무,소성가공학회,제 34 권 제 5 호, 2025, http://data.doi.or.kr/10.5228/KSTP.2025.34.5.246
09[KCI] 유체-구조 연성해석 기반 일체형 소음기 격벽의 소음 감쇠 및 구조안정성을 위한 설계 분석, 오민성, 이강찬, 홍석무, 한국산학기술학회지, 26,07, 2025
08[KCI] 플라스틱 씰의 구동조건 및 형상 민감도 분석을 통한 접촉 압력 경향 연구, 심형준, 오민성, 홍석무, 한국정밀공학회지, 42,8,2025, http://doi.org/10.7736/JKSPE.025.042
07.[KCI]판재성형 해석에서 GISSMO 손상 모델의 계수 결정 시 최적화 모델 비교 연구, 오민성, 박상규(Ansys), 홍석무, 한국소성가공학회, http://data.doi.or.kr/10.5228/KSTP.2025.34.4.192
06.[SCI] Automated Design and Analysis of Dies for The Bearing Hub Hot Forging Process Using Adaptive Parametric CAD Design with Real-Time Design Changes, M. Oh, S. Hong, The International Journal of Advanced Manufacturing Technology https://doi.org/10.1007/s00170-025-15966-1, 2025
05.[SCI] Multiphysics Analysis Process of Front-End Process for Induction Hardening of 3D Structures to Predict Structural Deformation ,Soonjae Hwang, Sarang Yi, Jongkyu Park, Seokmoo Hong, Appl. Sci. 2025, https://doi.org/10.3390/app15052410
04.[KCI] 2D 평면변형 모드 인장시험을 이용한 유동응력 곡선 획득, 이상민, 홍석무, 소성가공학회 vol.34, no.2, pp. 70-78, 2025 http://data.doi.or.kr/10.5228/KSTP.2025.34.2.70
03.[KCI] NURBS 기반 자세 교정 의자 역설계 방안, 오민성, 김정민, 홍석무, 한국산학기술학회 (2025.02)
02.[KCI] 전자기장 열 연성해석을 이용한 자기 흐름 집중기 - 2-way 형태에 따른 온도 변화 예측, 황순재,홍석무, 한국기계가공학회지, 24 , 1 , pp. 79~87 , https://doi.org/10.14775/ksmpe.2025.24.01.079
01.[SCI] The Real-Time Prediction of Cracks and Wrinkles in Sheet Metal Forming According to Changes in Shape and Position of Drawbeads Based on a Digital Twin, S. Lee, S. Hong, Appl. Sci. 2025, 15, 700, https://doi.org/10.3390/app15020700
[논문 2024]
15.[SCI] Reliability-Based Design Optimization of Bearing Hub Preform for Minimizing Defects Considering Manufacturing Tolerance in Hot Forging Process, M. Oh, J. Kim, J. Cho, M. Kim, M. Jeon, S. Hong, Appl. Sci. 2024, 14, 11316. https://doi.org/10.3390/app142311316
14.[KCI] 블라인드 리벳 너트 생산시 제조공차를 고려한 체결성능 강건최적설계, 오민성, 홍석무,한국소성가공학회지, vol.33, no.6, pp. 394-402, 2024 DOI : 10.5228/KSTP.2024.33.6.394
13.[KCI] 전자기장-열 2-way 연성 기법을 이용한 온도 분포가 균일한 유도가열 코일 설계, 현승훈, 황순재, 홍석무, Vol. 25, No. 12 pp. 620-627, 2024, https://doi.org/10.5762/KAIS.2024.25.12.620
12. [scopus] 반응표면법을 이용한 유도가열식 전기레인지 코일 형상 최적 설계 기법, 황순재, 이창연, 홍석무, 41권, 5호, 한국정밀공학회지, http://doi.org/10.7736/JKSPE.024.023
11.[KCI] M10 육각머리 볼트 다단 금형 설계 및 단조 성형해석 자동화 프로세스 개발, 오민성, 홍석무, 한국소성가공학회, 33권, 5호, 2024
9.[SCI]Tensile Specimen Circular Grid Pattern and AI-Based Strain Calculation Method, Sarang Lee,D. Hyun, S. Hong, Applied Sciences, 14, 7330. https://doi.org/10.3390/ app14167330
8.[KCI] 편광 카메라와 전처리 방법을 이용한 너트 불량 검사 알고리즘 개발, 윤주리, 이사랑, 홍석무, 산학기술학회, Vol. 25, No. 9, 710~716, 2024
7.[KCI] 딥러닝을 활용한 너트 불량 크기 판단 알고리즘 개발, 윤주리, 이사랑, 홍석무, 산학기술학회, Vol. 25, No. 9, 620~628, 2024
6. [scopus] 반응표면법을 이용한 유도가열식 전기레인지 코일 형상 최적 설계 기법, 황순재, 이창연, 홍석무, 한국정밀공학회지, 41권, 5 호, pp. 407-413, 2024
5. [scopus] 전자기장-열-구조-연성해석을 활용한 무선충전기 열변형에 대한 연구,황순재, 홍석무, 자동차공학회,32권,8호, 2024
4. [scopus] 전자기장-열-유체-구조 연성해석을 이용한 PCM 적용 무선 충전기의 냉각에 대한 연구, 황순재, 이사랑, 홍석무, 한국정밀공학회, 41권 4호, 2024
3. [KCI] 냉연 초고강도강 적용 차량용 리어 크로스 멤버 형상 설계 변수 최적화,김준영, 홍석무, 한국소성.가공학회지, 33권, 2, 2024
2. [SCI] Development of Hybrid-powered, Sustainable Multi-Purpose Drone System: An Analysis Model,D. Hyun, J. Han, S. Hong,International Journal of Hydrogen Energy, 2024(IF 7.2)
1. [KCI] 적재 용이성 향상을 위한 휠체어 프레임 구조 설계 , 오민성, 이창연, 홍석무, 산학기술학회, 2024.02
[논문 2023]
13. 고분자 전해질막 연료전지/배터리 기반 드론 모델 개발 및 하이브리드전원 내구성 유지를 위한 전력관리 전략 (현대일, 한재영, 홍석무)
12.[KCI] 잉크젯 프린터의 처짐량 개선을 위한 위상 최적화 기반 형상 설계, 오민성, 홍석무, 산학기술학회, Vol. 24, No. 12 pp. 328-334, 2023.
11. [KCI] 경도분포 및 역설계 기법을 활용한 ERW 파이프 열영향부 물성 예측 연구,이상민,현대일,홍석무,한국소성가공학회, Vol. 32, No. 6, 2023
10. [SCI] Power management strategy of hybrid fuel cell drones for flight performance improvement based on various algorithms, D. Hyun, J. Han, S. Hong, Energies 2023, 16, 8001. https://doi.org/10.3390/en16248001
9. [SCI] Cooling Strategy Optimization of Cylindrical Lithium-Ion Battery Pack via Multi-Counter Cooling Channels, Hyeonchang Jeon,Seokmoo Hong, Jinwon Yun, Jaeyoung, Energies,Energies 2023, 16(23), 7860
8. [KCI] 반응표면법을 이용한 상용 수소 전기 대형 트럭 배터리 캐리어 경량화 모델 설계의 제안,황순재,오민성, 홍석무, 생산제조학회지, Vol.32, No.5, 2023.10, DOI : 10.7735/ksmte.2023.32.5.283
7. [KCI] 연료전지-배터리 기반 무인항공기 추진시스템 동특성 분석을 위한 모델 개발,현대일,홍석무,한재영,Journal of Hydrogen and New Energy, Vol. 34, No. 5, 2023, pp. 490~496 DOI: https://doi.org/10.7316/JHNE.2023.34.5.490
6.[SCI] Damage prediction in thermoplastics under impact loading using a strain rate-dependent GISSMO, Engineering Failure Analysis , Felix Rickhey, Seokmoo Hong, vol. 149, 2023 (IF 3.63)
4. [KCI] 유한요소 해석과 역설계 기법을 활용한 ERW파이프열영향부 기계적 물성 획득, 이상민, 홍석무, Journal of the Korea Academia-Industrial cooperation Society,24권,3호, 2023
3. [KCI] 순차적 반응표면법을 이용한 상용 트럭 아마추어 코어 경량화 설계, 이현택, 홍석무, 한국소성가공학회, 32권1호,2023
2. [KCI] 반응표면법을 이용한 레그레스트 모듈의 경량화 설계, 이현택, 홍석무, Journal of the Korea Academia-Industrial cooperation Society Vol. 24, No. 02 , 2023
[KCI] 발열로 인한 무선 충전기 PCB의 열변형 측정 및 해석, 황순재, 홍석무, Asia-pacific Journal of Convergent Research Interchange Vol.9, No.1, January 31 (2023), pp.21-30
[논문 2022]
13.[SCI] Validation of axial and transverse force-displacement responses and principal strain rate ratios in the critical zone as a precursor to anisotropic damage prediction in metal sheets, Felix Richey,, Seokmoo Hong, International Journal of Material Forming, Dec., 2022, https://doi.org/10.1007/s12289-022-01732-1
12.[KCI]Parametric study를 통한 무선충전기 수동 냉각방식 설계, 황순재, 홍석무,Journal of the Korea Academia-Industrial cooperation Society Vol. 23, No. 12 pp.7-12, 2022
11.[KCI]친환경 자동차용 고강도 알루미늄 신소재(Almag6) 성형성 평가, 이상민, 홍석무, Journal of the Korea Academia-Industrial cooperation Society Vol. 23, No. 10 pp.9-17, 2022
10.[KCI] 강화학습 알고리즘을 이용한 초소형 전기자동차 현가장치의 제어 알고리즘 설계, 김영준, 홍석무, 오종석,Trans. Korean Soc. Noise Vib. Eng., 32(2) : 124~132, 2022,https://doi.org/10.5050/KSNVE.2022.32.2.124
9.[KCI]변기 커버 열림 편의성 향상을 위한 힌지의 동적 구조에 대한 연구, 오민성,안성훈(코웨이),홍석무, Asia-pacific Journal of Convergent Research Interchange, Vol.8, No.8, August 31 (2022), pp.1-11, DOI
5.[SCI] The definition of stress triaxiality for anisotropic metal sheets, Felix Richey,, Seokmoo Hong, International Journal of Mechanical Sciences, (processing)
[논문] (2021)
9.[SCI] Evolution of Instantaneous r-values in the post-critical region and its implications on the deformation behavior, International Journal of Mechanical Sciences, R.Felix, S. Hong, https://doi.org/10.1016/j.ijmecsci.2021.106612 2021. (IF 4.631)
8.[SCI] A New Fracture Detection Algorithm of Low Amplitude Acoustic Emission Signal Based on Kalman Filter-Ripple Voltage, Seong-Min Jeong, Seokmoo Hong,* and Jong-Seok Oh,Sensors 2021, 21, 4247. https://doi.org/10.3390/s21124247(IF 3.275)
7.[SCI] A numerical study of rotary draw bending with minimizing thinning and wrinkling based on wrinkle index, M. Kim, Seokmoo Hong, Mechanics & Industry, 2021 (processing)
6.[KCI] 전이학습 기반 CNN을 통한 풀림 방지 코팅 볼트 이진 분류에 관한 연구,노은솔, 이사랑, 홍석무, 한국산학기술학회, 2021.(02)
4.[SCOPUS] 강화학습을 이용한 자율 주행과 덕트 청소로봇 자율 주행 알고리듬 개발, 이사랑, 노은솔, 홍석무, 대한기계학회논문집A, 2021. (1)
3. [KCI] 이미지 분류 모델 전이 학습을 통한 코팅 볼트 선별에 관한 연구, 노은솔, 이사랑, 김민수, 홍석무, 한국산학기술학회, 2021.
Papers [2020]
9.[SCIE] Determination of the Forming Limit for a ZIRLO™ Sheet with High Anisotropy, Minsoo Kim, Seokmoo Hong, Materials, 2020.12(IF3.057)
8. [SCOPUS] CNN 및 모델 시각화 기법을 사용한 코팅 볼트 불량 판별, 노은솔, 이사랑, 김민수, 홍석무, 대한기계학회논문집, 2020. No10
7. [SCIE] Determination of post-necking stress-strain relationship for zirconium low-oxidation based on actual cross-section measurements by DIC, M. Kim, S. Hong, Journal of Mechanical Science and Technology, Vol. 34, 10, 2020(IF 1.345)
4. [SCOPUS]Development of Coated-Bolt Screening Algorithm Based on Machine-Learning and Preprocessing, Eunsol Noh, 2020
2. CNN 기반 공조 덕트 청소 로봇의 교차점 검출 알고리듬 개발, 이사랑, 홍석무 , 한국산학기술학회지,21(8), pp1-8, 2020
1. 유한요소해석을 이용한 M8 블라인드 리벳 너트 형상 최적 설계, 구본준, 최정묵, 홍석무 , 한국소성가공학회, 제 29권 3호, pp157-162, 2020
[논문] (2019)
9.[KCI]블라인드 리벳 너트 체결 적합성에 관한 연구.김찬양,홍석무,한국소성가공학회,2020(processing)
7. [SCOPUS]The Study on Alignment of 2D Camera based on Photogrammetry for DIC, Wonseop Kim, Seokmoo Hong, Journal of Advanced Research in Dynamical and Control Systems (JARDCS), 11,pp. 1995~2005,2019
5.다양한 하중 조건에서 DP980 판재의 불안정성 및 파단점 결정시 DIC Frame Rate의 영향, 노은솔, 홍석무, 한국소성가공학회지, 제28권, 제6호, pp. 368-374, 2019.
4. 허브클러치 제품의 피어싱 펀치 및 금형 형상 최적화를 위한 수치접근법, 구본준, 홍석무, 한국산학기술학회지, 제20권, 제9호, pp.517-524, 2019.
2. [SCIE] EFFECT OF MILLING TIME PARAMETER ON THE MICROSTRUCTURE AND THE THERMOELECTRIC PROPERTIES OF N-TYPE Bi2Te2.7Se0.3 ALLOYS, P. SHARIEF*, B. MADAVALI*, J.M. KOO, H.J. KIM, S. HONG, S.-J. HONG, ARCHIVES OF METALLURGY AND MATERIALS 64(2), 585-590, 2019.
1. [SCIE] Curvature area prediction for the deep drawing-ironing process of a cylindrical cup using finite element method and regression analysis C Lee, S Hong, Journal of Mechanical Science and Technology 32 (12), 5913-5918, 2019.(IF 1.345)
논문(2018)
Development of oil canning index model for sheet metal forming products with large curvature, H Kim, S Lee, M Murugesan, S Hong, S Lee, J Ki, H Jung, N Kim, Journal of Physics: Conference Series 896 (1), 012064
FE analysis of refrigerator drop test and the optimization of lower hinge geometry using equivalent static load method, M Kim, S Hong, Journal of Mechanical Science and Technology 32 (11), 5279-5283, 2018
Experimental determination of the failure surface for DP980 high-strength metal sheets considering stress triaxiality and Lode angle, M Kim, H Lee, S Hong, The International Journal of Advanced Manufacturing Technology, 1-10, 2018
- Emerging technologies in mechanical engineering Emerging technologies in mechanical engineering Conference ETME2018, Strain - and stress based path independent forming limit criteria for zirconium alloy sheet Minsoo Kim, Seokmoo Hong,2018.08, p. 587
- Emerging technologies in mechanical engineering Emerging technologies in mechanical engineering Conference ETME2018, The Experimental Study on the Alignment of 2D Images for DIC based on Photogrammetry Wonsoep Kim, Seokmoo Hong,2018.08, p. 391
- ACEX2018, 12th International Conference on Advanced Computational Engineering and Experimenting, ACE-X 2018 Conference ACEX2018,netherland, The Study on the Chevron Crack Considering Stress triaxiality in the Process of Multi-stages Extrusion, Seokmoo Hong, 2018.07
- 한국소성가공학회, 한국소성가공학회 학술대회 논문집, 2018년도 한국소성가공학회 춘계학술대회 초록집, 판재성형 및 단조공정에서 삼축응력 파단곡면에 대한 실험적 고찰 및 유한요소해석, 김준영, 홍석무, 2018.5, 56-56
- 한국소성가공학회, 한국소성가공학회 학술대회 논문집, 2018년도 한국소성가공학회 춘계학술대회 초록집, 다단 딥드로잉 공정에서 아이어닝 곡률부 면적 예측에 대한 연구 이창회, 홍석무, 2018.5, 198-198
- 대한기계학회 대한기계학회 춘추학술대회 대한기계학회 재료 및 파괴부문, 2018년도 춘계학술대회 논문집, DP980 판재의 파단한계 정밀측정을 위한 DIC 방법론, 김민수, 홍석무, 2018.4, 236-237
- 한국소성가공학회, 한국소성가공학회 학술대회 논문집, 2018년도 한국소성가공학회 춘계학술대회 초록집, 체적성형과 판재성형이 동시에 적용된 프로그레시브 공정의 유한 요소 해석, 김예은, 노은솔, 홍석무, 2018.5 41-41
■ 논문(~2017)
1.201710,다중 회귀 분석을 활용한 Tee-Pipe 버링 공정에서 찢어짐 방지를 위한 피어싱 펀치 형상 최적 설계,한국소성가공학회 논문집,"이영섭, 김준영, 강정식",1225-696X,26,5,271,276,홍석무
2.201707,LPI 차량용 연료필터 상부 하우징 냉간 단조 성형 공정에서 sink 현상 예측 및 개선,한국산학기술학회논문집,한국산학기술학회,1975-4701,18,6,395,399,홍석무
3.201707,사각 컵 배터리 케이스 바닥 벤트 성형을 위한 단조 금형 설계,한국산학기술학회논문집,한국산학기술학회,1975-4701,18,6,330,335,홍석무
5.201704,2차원 DIC 기법 적용을 위한 2D 이미지 보정 수치 해석 기법,한국산학기술학회논문집,한국산학기술학회,1975-4701,18,4,391,397,홍석무
6.201704,사각형 캔 드로잉 다단 공정에서 성형성과 제품형상을 동시에 고려한 초기 블랭크 형상 최적 설계,Journal of the Korea Academia-Industrial,Journal of the Korea Academia-Industrial,1975-4701,,,,,홍석무
7.201611,타원형 다단 딥 드로잉 제품의 성형성 향상을 위한 초기 소재 형상 최적 설계,한국산학기술학회학회지,한국산학기술학회,1975-4701,17,10,696,701,홍석무
8.201610,1.2GPa급 강판 판재 성형에서 스프링백 감소를 위한 금형 보상 설계,한국소성가공학회지,한국소성가공학회,1225-696X,25,5,301,305,홍석무
9.201610,1.2GPa 강판의 판재성형에서 주름 및 성형성 향상을 위한 다중 목적함수 최적 설계,한국소성가공학회지,한국소성가공학회,1225-696X,25,5,295,300,홍석무
10.201609,알루미늄 캔 딥드로잉에서 Bottoming을 이용한 스프링백 최소화,한국산학기술학회논문지,한국산학기술학회,1975-4701,17,9,302,307,홍석무
11.201604,3D 스캔 시 품질향상을 위한 스프레이 도포 자동화 장비 개발,한국산학기술학회논문지,한국산학기술학회,1975-4701,17권,4호,100,105,홍석무
12.201509,사각형 판재성형 시 벽두께 증육을 위한 금형 및 공정 설계,한국산학기술학회논문지,한국산학기술학회,19754701,16,9,5789,5794,홍석무
13.201508,사출금형 냉각수의 유동 패턴이사출성형품의 변형에 미치는 영향,한국기계가공학회지,한국기계가공학회,15986721,14,4,92,99,홍석무
14.[SCIE] 201506,Preform design of hybrid-forming process to make sheet metal IT products with a sharp edge,Journal of Mechanical Science and Technology,대한기계학회,1738494X,29,6,2467,2475,홍석무
15.201505,에어컨 실내기 사출 조립품의 열변형 3D측정과 유한요소해석,한국생산제조시스템학회지,한국생산제조시스템학회,2283-4846,24,2,251,255,홍석무
16.201504,공차해석을 이용한 에어컨 실내기의 조립성에 관한 연구,대한기계학회논문집 A,대한기계학회,12264873,,,,,홍석무
17.[SCIE] 201503,Effect of Metallic Glass Particle Size on the Contact Resistance of Ag/Metallic Glass Electrode,Metallurgical and Materials Transactions A,Springer,1073-5623,,,,,홍석무
18.[SCIE] 201412,Internal structural evolution and enhanced tensile plasticity of Ti-based bulk metallic glass and composite via cold rolling,Journal of Alloys and Compounds,Elsevier BV,0925-8388,615,S1,113,117,"Park, J.M./Lim, K.R./Park, E.S./Hong, S./Park, K.H./Eckert, J./Kim, D.H."
19.201411,유한요소법과 최적설계기법을 활용한 히트싱크 콜드 플레이트 최적 설계,소성가공,한국소성가공학회,1225696X,23,7,419,424,홍석무/서형준/김종문/심재원/황지훈
20.201408,HSS강판 판재성형 시 스프링백 최소화를 위한 드로우 비드 최적 설계,한국생산제조시스템학회지,한국생산제조시스템학회,22336036,23,4,350,354,홍석무/황지훈
21.201407,반도체 산업의 정밀리드프레임에 대한 프레스 및 금형 변형 예측,소성가공,한국소성가공학회,1225696X,23,4,206,210,홍석무/윤여환/엄성욱/황지훈/이동욱
22.[SCIE] 201406,Phase transformation and mechanical properties of as-cast Ti41.5Zr41.5Ni17 quasicrystalline composites,JOURNAL OF NON-CRYSTALLINE SOLIDS,ELSEVIER SCIENCE BV,0022-3093,392,,6,10,"Park, GH (Park, G. H.)/Hong, SH (Hong, S. H.)/Kim, JT (Kim, J. T.)/Park, HJ (Park, H. J.)/Seo, Y (Seo, Y.)/Suh, JY (Suh, J. Y.)/Hong, S (Hong, S.)/Park, JM (Park, J. M.)/Kim, KB (Kim, K. B.)"
23.201406,세라믹 사출공정에서 시편의 두께에 따른 기계적 강성 연구,한국산학기술학회논문지,한국산학기술학회,19754701,15,6,3396,3402,김진호/홍석무/황지훈/이종찬/김낙수
24.201406,유한요소법을 이용한 헤어핀 형 열 교환기의 튜브 확관에 대한 연구,소성가공,한국소성가공학회,1225696X,23,3,164,170,현홍철/황지훈/홍석무
25.201405,판상제품의 세라믹 사출 시 공정변수 영향 분석,한국산학기술학회논문지,한국산학기술학회,19754701,15,5,2587,2593,홍석무/김진호/황지훈/이종찬/김낙수
[2013]
26.[SCIE] 201306,Determination of the flow stress and thermal properties of ceramic powder feedstock in ceramic injection molding,JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY,KOREAN SOC MECHANICAL ENGINEERS,1738494X,27,,1815,1824,"Hwang, J/Choi, S/Hong, S/Kim, N"
27.201306,다이캐스팅 금형의 내구 수명평가와 금형강 소재 선정에 대한 연구,한국기계가공학회지,한국기계가공학회,15986721,12,3,7,12,김진호/홍석무/이종찬
[2012]
28.[SCIE] 201203,A study on the mechanical properties and deformation behavior of injection molded PMMA-TSP laminated composite,KOREA-AUSTRALIA RHEOLOGY JOURNAL,KOREAN SOC RHEOLOGY,1226119X,24,,23,33,"Wang, J/Lee, MK/Park, SM/Hong, S/Kim, N"
29.2012,Numerical Simulation of Powder Metal Forming Process Using the SPH Method,STEEL RESEARCH INTERNATIONAL,WILEY-V C H VERLAG GMBH,1611-3683,,Special SI,787,790,"Groenenboom, P (Groenenboom, P/Choi, K (Choi, Kwangyong)/Lee, I (Lee, Inhyeok)/Choi, S (Choi, Sunchul)/Hong, S (Hong, Seokmoo)"
[2011]
30.[SCIE]201112,Analysis of excessive deformation behavior of a PMMA-touch screen panel laminated material in a high temperature condition,KOREA-AUSTRALIA RHEOLOGY JOURNAL,KOREAN SOC RHEOLOGY,1226-119X,23,4,195,204,"Lee, H (Lee, Hyeon)/Wang, J (Wang, Jaeyoon)/Park, SM (Park, Seon-Mi)/Hong, S (Hong, Seokmoo)/Kim, N (Kim, Naksoo)"
31.[SCIE]201112,Prediction of thermal deformation considering the residual stresses for the PMMA-TSP laminated structure,JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY,KOREAN SOC MECHANICAL ENGINEERS,1738494X,25,12,3135,3140,"Cho, JH/Lee, MK/Park, SM/Hong, S/Kim, N"
[2009]
32.[SCIE]200908,Evaluation and prediction of the forming limit of AZ31B magnesium alloy sheets in a cross-shaped cup deep drawing process,METALS AND MATERIALS INTERNATIONAL,metals and meterial,,15,,575,584,"Choi, SC/Kim, HY/Hong, SM/Shin, YS/Lee, GH/Kim, HJ/Kim, HY/Shin, YS/Lee, GH"
33.[SCIE]200908,Evaluation and prediction of the forming limit of AZ31B magnesium alloy sheets in a cross-shaped cup deep drawing process,METALS AND MATERIALS INTERNATIONAL,metals and materials,,15,,575,584,"Choi, SC/Kim, HY/Hong, SM/Shin, YS/Lee, GH/Kim, HJ/Kim, HY/Shin, YS/Lee, GH"
34.[SCIE]200908,Evaluation and Prediction of the Forming Limit of AZ31B Magnesium Alloy Sheets in a Cross-Shaped Cup Deep Drawing Process,Metals and Materials International,대한금속·재료학회,15989623,15,4,575,584,최선철/김헌영/홍석무/신용승/이근호/김형종
35.[SCIE]200804,Finite element analysis of rotary blanking: Effects of punch geometries on cutting area and stress distribution,INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY,KSME,,9,,211,216,"Hein, C/Hong, S/Suh, J/Hoffmann, H/Kim, N"