Students

Main advisor of 2 PhD students:

1. Yu-Kai Huang, “Electrical Stimulator and Surface Electromyography Integrated Circuits for Musculoskeletal Healthcare”, KTH, admitted 2019, finished 2024, funded by SSF, Region Stockholm, and Vinnova (80%)

2. Hamidreza Rahimi, “Towards Fully Integrated Continuous Lactate Monitoring Systems”, KTH, admitted 2024, planned graduation 2029, funded by Region Stockholm/MedTechLabs (80%)

Co-advisor of 14 PhD students:

1. Julian Garcia, “Digitally Enhanced Continuous-Time Sigma-Delta Analogue-to-Digital Converters”, KTH, finished 2012 (20%)

2. Manolopoulos Vasileios, “Security and Privacy in Smartphone Based Intelligent Transportation Systems”, KTH,  (finished licentiate) 2012 (20%)

3. Sha Tao, “Power-Efficient Continuous-Time Incremental Sigma-Delta Analog-to-Digital Converters”, KTH, finished 2015 (20%)

4. Tingsu Chen, “Spin Torque Oscillator Modeling, CMOS Design and STO-CMOS Integration”, KTH,  finished 2015 (20%)

5. Janko Katic, “Efficient Energy Harvesting for Implantable Biosensors”, KTH, finished 2017 (20%)

6. Nikola Ivanisevic, “Ultra-low power Sigma-Delta converters for biomedical applications”, KTH,  2014 – present, finished 2019 (20%)

7. Muhammad Waqar Hussain, “High temperature SiC RFIC solutions”, KTH,  finished 2019 (20%)

8. Panagiotis Chaorani, “Sequential 3D integration of analog and mixed signal circuits”, KTH, finished 2019 (20%)

9. Dagur Ingi, “Spin Hall Nano-oscillators based Electronic Systems”, KTH, finished 2023 (20%)

10. Alejandro Fernandez, “Fully Integrated Bioimpedance Spectroscopy Interface for Wearable  Electrical Impedance Myography”, KTH, finished 2024 (20%)

11. Robin Juthberg, “Preliminar Title: Matrix based Neuromuscular Electrical Stimulators”, Karolinska Institutet, ongoing  2018 – 2025 (10%)

12. Nelida Ines Aliaga Sanchez, “Preliminar Title:  Compliance in Neuromuscular Electrical Stimulators”, Karolinska Institutet, ongoing 2023-2028 (10%)

13. Anna Brammås, “Preliminar Title: Continuous lactate monitoring during labour – development of a new technology”, Karolinska Institutet, ongoing, 2024-2029 (20%)

14. Leandro Trujilho, “Preliminar title: LambWave ASIC design”, KTH, ongoing 2025-2029 (20%)* 

MSc students:

1. Sezi Yamac, “Design of a CDR Circuit for a Non-Coherent UWB Receiver for RFID Applications”, 2005 *  (S)

2. Lu Zhang, “Design and Implement of Fully Printable RFID Tags Based on High Speed Time Reflections”, 2006 * (S)

3. Chao LV, “A Printable Chipless RFID Technology Based on LC Reflections within UWB swept frequencies”, 2006 (S)

4. Thimios Darvazos, “Low flicker noise mixer for WiMAX”, 2007 (S)

5. Linlin Zheng, “Printable and programmable RFID technology for passive wireless sensor networks”, 2007 * (S)

6. Johan Eriksson, “Differential Low-noise Amplifier for a DVB-S receiver”, 2007 (S)

7. Tao Sha, “Investigation of 60 GHz Radio Front-Ends in nanometer CMOS”, 2009 * (S)

8. Hans Rabén, “Design and Implementation of a WiMAX/LTE receiver front-end”, 2009 * (S)

9. Maryam Olyaei, “SOI FinFETs, characterization, modelling and applications”, 2010 (S)

10. Ying Song, “Ultra Low-power Receiver Front-End for medical applications”, 2010 (S)

11. Tingsu Chen, “RF Amplifiers for Spin Torque Oscillators”, 2011 * (S)

12. Babak Taghavi, “Single mixer I/Q downconverters”, 2011 (S)

13. Milad Razzaghpour, “Biomedical analog front-end for glucose monitoring”, 2011* (S)

14. Muhammad Wakar Hussain, “Bio-impedance sensor for implantable devices”, 2012* (S)

15. Andreas Svensson, “Inductive powering and communication for implantable devices”, 2012 (S)

16. Paolo Marozzi, “3D Electromagnetic characterization of implantable electrodes”, 2013 (S)

17. Mukul Suhas, “Integration of a novel flow boundary layer sensor into a wireless sensor network taking into account minimal space and energy consumption”, 2018 (S,E)

18. Dagur Ingi, “Macrospin-based Modeling of Three-Terminal Spin Hall Nano Oscillators”, 2018 (E)

19. Thorir Marwan, “Preamplifier Design for Active Electrodes in Single-Channel EEG Applications”, 2018 (E)

20. Olle Blomqvist, “Fiber optic USB 3.2 link with backwards compatibility: A pre-study”, 2024 (S)

21. Leire Carreras Orobengoa, “Energy Harvesting for Health Monitoring Balises: Analutical study”, 2021 (E)

22. Youjie Chen, “Micro Assembly of Radio Frequency Electronics; Characterization of Bond Wires”, 2019 (S)

23. Alejandro Fernandez, “Design of a hand-held readore for implantable applications”, 2019

24. Dimitrios Koutlis, “Estimation of Voltage Drop in Power Circuits using Machine Learning Algorithms: Investigating potential applications of machine learning methods in power circuits design”, 2023 (S)

25. Sturla Lange, “Study and Design of a DC-DC Converter for Third Generation Solar Cells”, 2018 (S)

26. Thorir Marwan Abed, “Preamplifier Design for Active Electrodes in Single-Channel EEG Applications”, 2018 (E)

27. Kevin Pettersson, “Investigation of Full-Duplex VLC Through Glass: An experimental study”, 2024 (S)

28. Odinn K. Runarsson, “Design and implementation of an energy harvesting system in a prosthetic limb”, 2023 (E)

29. Wilhelm Westermark, “Sustainable energy harvesting for low power sensor systems: on the road towards a batteryless sensor future”, 2024 (S)

BSc students:

1. Fatameh Amiri, Sara Nousier, “Optisk metod för glukosmätning – En studie för framtida icke-invasiva blodglukosmätningar”, 2017 (S,E)

2. Thomas Peterson, “Dynamic Allocation for Embedded Heterogenous Memory, An Empirical Study”, 2018 (E)

3. Dunca Andreas, Hoang Anh Quoc Nguyen, “Wireless electromyogram system”, 2020 (S,E)

4. Mahad Hassan, Fredrik Edelsärd, “Demontering av ett mekaniskt låssystem med CAN 2.0: En fallstudie I hur en CAN-buss kan användas inom dörrlåssystem”, 2020 (E)

5. Ante Larsson, Niclas Fölster, “Design och utvärdering av programvara för en Bluetoothkommunicerande lågenergienhet”, 2020 (S)

6. Anton Åbonde, Simon Salas Amnér, “Using embedded systems to optimize the care of indoors plants”, 2020 (E)

7. Mikael Hessel, “Integrating a SpiNNaker 2 prototype on an embedded platform: Hardware design and firmware modification”, 2021 (E)

8. Elias Johansson, “Current sensing software for electronic fuse applications: Analysis of two different current measurement implementations”, 2021 (S)

9. Mikael Andersson, “Röjande Signaler: en sidokanalattack via radiofrekvens mot transmissionsledning på kretskort”, 2022 (E)

10. Emil Ransed, “A heuristic approach to screw pose detection”, 2022 (S)

11. Jim Wilson, “Generative melodier för modulära syntar: En vidareutveckling av den klassiska steg”, 2022 (E)

12. Oliver Antal, “A cybersecurity audit of the Garmin Venu”, 2023 (E)

13. Jonathan Gustafson, “System support for maintenance of production equipment and advanced test environment: Proposal for Saab’s Maintenance Operation”, 2023 (E)

14. Jesper Jansson, Wilhelm Nordgren,  “Analog-mixed signal front-end for Torque signal processing: A theoretical noise analysis and signal-chain evaluation”, 2023 (S)

15. Malin Otter, Jamal Pati Bashar, “Automatic overcurrent and leakage current sensing in multiple channel NMES systems”, 2023 (S,E)

16. Ali Suleimani, “Battery Management for Automotive Testbed; system evaluation for Battery Management System”, 2023

17. Basel Mardini, “Drone Based User Tracking System: The use of beam riding for tracking and following a user”, 2024 (E)

18. Mattias Sandberg, Elis Gunnarson, “Web vulnerability Scanner: Cybersecurity”, 2024 (E)