ArCOM('write'...)

Description

Writes values to Arduino using an ArCOM serial port

• Accepts scalar values or arrays

• Accepts signed and unsigned integers of 8, 16 or 32 bits.

• Returns an error if data is out of range for the intended data type.

Syntax

ArCOM('write', Port, Data, Datatype, Data2, Datatype2,...)

Parameters

• Port: An ArCOM serial port struct, created with ArCOM('open'...).

• Data: A MATLAB variable containing data to send.

• Datatype: A string specifying the data type:

  • 'uint8'

  • 'uint16'

  • 'uint32'

  • 'int8'

  • 'int16'

  • 'int32'

• DataN, DatatypeN: Optionally, additional scalars or arrays of data can be added as pairs of additional data and datatype arguments.

  • Instead of a list of separate calls to ArCOM, this allows more efficient transmission: the data vectors will be packaged into a byte string, and transmitted with a single write call to the underlying interface.

Returns

None

Example

% 1. This sends a 32-bit unsigned integer to Arduino. Arduino is connected to an ArCOM serial port in the current workspace, named MyPort.

MyInt = 3141592;

ArCOM('write', MyPort, MyInt, 'uint32');

% 2. This sends a 100-sample sine wave (range: +/- 10,000) to Arduino as signed 16-bit integers.

MyWave = int16(sin(.1*(1:100))*10000);

ArCOM('write', MyPort, MyWave, 'int16');

% 3. This sends an 8-bit op code, a 32-bit time and a 16-bit sample with a single call to the underlying serial interface:

opCode = 56;

time = 102423;

sample = 5001;

ArCOM('write', MyPort, opCode, 'uint8', time, 'uint32', sample, 'int16');