Ajit , R. & Rejeesh, C. R. (2025). An Investigation into the Effect of Cooling on the Efficiency of Monocrystalline Solar Panels. Journal of Applied Science, Engineering, Technology and Management, 3 (1), pp. 07–10. https://doi.org/10.61779/jasetm.v3i1.2
Rejeesh C R, Tom Anto, Abhishek Agarwal, Masengo Ilunga,Elammaran Jayamani and Valliyappan David Natarajan, (2024). Materials Synthesis and characterization of nano-titanium carbide-filled Acrylonitrile Butadiene-Styrene polymer composites for electromagnetic interference shielding, Revue des Composites et des Matériaux Avancés-Journal of Composite and Advanced Materials, 34 (6), 673-679. https://doi.org/10.18280/rcma.340601 (ESCI/SCOPUS Indexed, Q3; Cite Score:1.9)
Tom Anto, Rejeesh C R, Abhishek Agarwal, Elammaran Jayamani and Valliyappan David Natarajan, (2024). Investigation of Mechanical Properties of 3D Printed Biodegradable Polylactic Acid Reinforced with Paper Microcrystalline Cellulose, Applied Science and Engineering Progress, 17 (4), 7540 (1-9), DOI: 10.14416/j.asep.2024.08.007 (Scopus Q2).
Tom Anto, Rejeesh C R, K M Praveen and Elammaran Jayamani, (2024). Effect of Borax-Boric acid treatment on Fire resistance, Thermal stability, Acoustic, and Mechanical Properties of Mycelium Biocomposites, Applied Science and Engineering Progress, 17 (4), 7271 (1-11), DOI:10.14416/j.asep.2023.11.007 (Scopus Q2).
Rejeesh, C. R., Joseph, A., & Arun Kumar, M. N. (2024). Emerging Technological Trends in the Era of AI. Journal of Applied Science, Engineering, Technology and Management, 2(01), 01–02. https://doi.org/10.61779/jasetm.v2i1.0.
Batista, R. C. & Rejeesh C. Rajendran, (2023). Computational Analysis of Thermal Performance Augmentation in Helical Coil Heat Exchangers via CuO/Water Nanofluid. Power Engineering and Engineering Thermophysics, 2(3), 139-149. https://doi.org/10.56578/peet020302.
Jose, A., Josey, N., Sidharth, K P., Henri, P., James, R. and Rejeesh C R. (2023). Automated Guided Vehicle Using Advanced Line Follower Algorithm For Transporting Heavy Payloads. Journal of Applied Science, Engineering, Technology and Management, 1(1), 01–05. https://doi.org/10.61779/jasetm.v1i1.1
Sinha, P., Agarwal, A., & Rejeesh, C. R. (2023). Computational Fluid Dynamics Analysis of the Influence of Openings on Wind Load and Structural Response in Triangular Buildings. Journal of Sustainability for Energy, 2 (2), 50-67. https://doi.org/10.56578/jse020202.
Joyal Jose, K N Uvais, T S Sreenadh, Ashwin V Deepak, C R Rejeesh. (2021), Investigations into the development of a mycelium biocomposite to substitute Polystyrene in Packaging Applications. Arabian Journal for Science and Engineering. 46 (3), 2975–2984. https://doi.org/10.1007/s13369-020-05247-2 (SCI/SCOPUS Indexed, Q1; IF:2.807).
Rejeesh, C.R. & Saju, K.K. (2018), Relative improvements in flame resistance of coir fiber boards treated with fire-retardant solution, Journal of Wood Science, 64(5), 697 - 705. https://doi.org/10.1007/s10086-018-1747-3. (SCI/SCOPUS Indexed, Q3; IF:2.658)
Rejeesh, C. R., Saju, K. K. (2018), Effect of fire retardant treatment on mechanical properties of medium density coir composite boards. Wood and Fiber Science, 50(1) 113-118. (SCI/SCOPUS Indexed, Q2; IF:1.703)
Rejeesh, C. R., Saju, K. K. (2017), Effect of chemical treatment on Fire-Retardant properties of Medium Density Coir Fiber Boards. Wood and Fiber Science, 49(3), 332–337. (SCI/SCOPUS Indexed, Q2; IF:1.703)
Anagha Ashok, C. R. Rejeesh (2019), Investigating the Biodegradability and Physical Properties of Starch Derived Bioplastic Films Reinforced with Nanosilica, International Journal of Nanoscience,18 (6), DOI:10.1142/S0219581X185 00370. (ESCI/SCOPUS Indexed, Q3; Cite Score:1.1)
Sooraj R Menon, Rejeesh C R. (2020), Improved Thermal stability of Boron treated Coir MDF boards. Journal of Polymer & Composites. 8(2): 33–40p. (ESCI/ CAS Indexed)
Amal Ramesh, Joseph Davis, Rejeesh CR. (2020), Development and Performance Assessment of a Prototype Zeer-Pot Refrigerator. Journal of Alternate Energy Sources & Technologies. 11(2): 41–45p. (CAS Indexed)
Rejeesh C.R., Anoob Jose, Chinmayakrishan G. (2017), Impact of Using Liquefied Natural Gas for Transportation in the City of Cochin: A Review. Journal of Alternate Energy Sources and Technologies, 8(3), 29–35p. (CAS Indexed)
Anagha Ashok, Rejeesh CR. (2017), Effect of Softening Agents in the Thermal and Morphological Properties of Starch Based Bioplastics. Journal of Polymer & Composites. 5(1): 15–24p. (ESCI/ CAS Indexed)
A. Ashok, C.R. Rejeesh, R. Renjith, (2016), Biodegradable Polymers for Sustainable Packaging Applications: A Review. International Journal of Bionics and Biomaterials, 2 (2), pp 1–11.
Rejeesh C R, Manu Mathew, Renjith R, (2016), Machining process simulation of SOM 125 series printing machine components using CATIA V5 Machining. International Journal of Computer Aided Manufacturing, 1 (2), pp 40–52.
Anagha Ashok, Manu Mathew, Rejeesh C. R., (2016), Innovative Value Chain Development of Modified Starch for a Sustainable Environment: A Review. International Journal of Polymer Science and Engineering, ISSN: 2455-8745, 2 (1), pp 20–32.
Ilyas N. P., Rejeesh C. R., (2015), Modelling and Thermal Analysis of Medium Density Composite Boards. International Journal of Engineering Research& Technology (IJERT), ISSN: 2278-0181, 4 (8), pp 557–559.
Jon Bonnar anak Jores, Elammaran Jayamani, Tasha Sie Ming Lai, Jeyanthi Subramanian, C.R. Rejeesh, (2024), Evaluation of mechanical property of banana HDPE composite through experiment and artificial neural network (ANN), Materials Today: Proceedings, 103, 321-327. https://doi.org/10.1016/j.matpr.2023.08.351. ISSN 2214-7853
Tom Anto, C.R. Rejeesh, (2023). Synthesis and characterization of recycled HDPE polymer composite reinforced with nano-alumina particles, Materials Today: Proceedings. 72 (6), 3177-3182. https://doi.org/10.1016/j.matpr.2022.11.190 (SCOPUS Indexed, Cite Score: 2.3)
Rejeesh, C. R., & Tom Anto, (2023). Packaging of milk and dairy products: Approaches to sustainable packaging. Materials Today: Proceedings. 72 (6), 2946-2951. ISSN 2214-7853, https://doi.org/10.1016/j.matpr.2022.07.467 (SCOPUS Indexed, Cite Score: 2.3)
Anto, T., & Rejeesh, C. R. (2021). Investigations into the tribological properties of Titanium-dioxide alumina coated mild steel. Materials Today: Proceedings. 47 (15), 5386-5390. (SCOPUS Indexed, Cite Score: 2.3)
Vijayakumar, V., Manu, N. S., Vasudevan, M. C., Kiran, M. V., & Rejeesh, C. R. (2021). Phase change materials for improved performance and continuous output in stepped solar stills equipped with HDH. Materials Today: Proceedings. 47 (15), 5064-5068. (SCOPUS Indexed, Cite Score: 2.3)
Sivaprasad, S., Byju, S. K., Prajith, C., Shaju, J., & Rejeesh, C. R. (2021). Development of a novel mycelium bio-composite material to substitute for polystyrene in packaging applications. Materials Today: Proceedings. 47 (15), 5038-5044. (SCOPUS Indexed, Cite Score: 2.3)
Ritwik, A., & Rejeesh, C. R. (2021). Mechanical property evaluation of elephant dung fiber based epoxy composites. Materials Today: Proceedings. 47 (15), 5059-5063. (SCOPUS Indexed, Cite Score: 2.3)
Abhijith R, Anagha Ashok, Rejeesh C. R. (2018), Sustainable packaging applications from mycelium to substitute polystyrene: A Review. Materials Today: Proceedings, 5 (1/P2), pp. 2139–2145. (SCOPUS Indexed, Cite Score:1.8)
Anagha Ashok, Abhijith R, Rejeesh C. R. (2018), Material characterization of starch derived bio degradable plastics and its mechanical property estimation. Materials Today: Proceedings, 5 (1/P2), pp. 2163–2170. (SCOPUS Indexed, Cite Score:1.8)
Rejeesh, C. R., Saju, K. K. (2017), Methods and materials for reducing flammability behaviour of coir fibre based Composite Boards: A Review. Materials Today: Proceedings, 4 (9), pp. 9399–9407. (SCOPUS Indexed, Cite Score:1.8)
Rejeesh C Rajendran, Tom Anto, Abhishek Agarwal, Marine Algae based starch for sustainable Bioplastics: A comprehensive review, Proceedings of International Conference on Advanced Energy Materials for a Sustainable Future (ICAEMS 2024). 22-23 August 2024, Federal Institute of Science And Technology (FISAT), India. ISBN: 978-93-91673-94-9
Tom Anto, C.R. Rejeesh, Abhishek Agarwal, Elammaran Jayamani, David NV, Investigation of mechanical properties of 3d printed biodegradable polylactic acid reinforced with paper microcrystalline cellulose, Proceedings of International Conference on Eco-friendly Fibers and Polymeric Materials” 2024 - EFPM’24 (Hybrid mode), Bangkok, Thailand, 20th February 2024, King Mongkut's University of Technology North Bangkok (KMUTNB), Thailand.
Tom Anto, C.R. Rejeesh, K M Praveen, Elammaran Jayamani, Effect of borax-boric acid treatment on fire resistance, thermal stability, acoustic, and mechanical properties of mycelium bio composites, Proceedings of International Symposium on Lightweight and Sustainable Polymeric Materials - LSPM’23 (Virtual mode), Bangkok, Thailand, 17th February 2023, King Mongkut's University of Technology North Bangkok (KMUTNB), Thailand.
Tom Anto, C.R. Rejeesh, Synthesis and characterization of recycled HDPE polymer composite reinforced with nano-alumina particles, Proceedings of 2nd International Conference on Sustainable materials, Manufacturing and Renewable Technologies (i-SMaRT 2022). ISBN 978-93-92537-38-7. 25-27 May 2022, Federal Institute of Science And Technology (FISAT), India.
Rejeesh, C. R., & Tom Anto, Packaging of milk and dairy products: Approaches to sustainable packaging. Proceedings of 2nd International Conference on Sustainable materials, Manufacturing and Renewable Technologies (i-SMaRT 2022). ISBN 978-93-92537-38-7. 25-27 May 2022, Federal Institute of Science And Technology (FISAT), India.
Ritwik A., Rejeesh C R, Mechanical property evaluation of elephant dung Fiber based epoxy composites, Proceedings of 1st International Conference on Sustainable materials, Manufacturing and Renewable Technologies (i-SMaRT 2021), ISBN 978-81-951626-3-5. 22-23 April 2021, Federal Institute of Science And Technology (FISAT), India.
Vivek Vijayakumar, N S Manu, Vasudevan M C, Kiran M V, Rejeesh C R, Phase change materials for improved performance and continuous output in stepped solar stills equipped with HDH, Proceedings of 1st International Conference on Sustainable materials, Manufacturing and Renewable Technologies (i-SMaRT 2021), ISBN 978-81-951626-3-5. 22-23 April 2021, Federal Institute of Science And Technology (FISAT), India.
Tom Anto, C R Rejeesh, Investigations into the tribological properties of Titanium-dioxide alumina coated mild steel, Proceedings of 1st International Conference on Sustainable materials, Manufacturing and Renewable Technologies (i-SMaRT 2021), ISBN 978-81-951626-3-5. 22-23 April 2021, Federal Institute of Science And Technology (FISAT), India.
Sivaprasad S, Sidharth Byju, Prajith C, Jithin Shaju, Rejeesh C R, Development of a novel mycelium bio-composite material to substitute for polystyrene in packaging applications, Proceedings of 1st International Conference on Sustainable materials, Manufacturing and Renewable Technologies (i-SMaRT 2021), ISBN 978-81-951626-3-5. 22-23 April 2021, Federal Institute of Science And Technology (FISAT), India.
Abhijith R, Anagha Ashok, Rejeesh C. R., Sustainable packaging applications from mycelium to substitute polystyrene: A Review, Proceedings of Second International Conference on Material Science (ICMS2017), 16-18 February, 2017, Tripura University (A Central University), Tripura, India.
Anagha Ashok, Abhijith R, Rejeesh C. R., Material characterization of starch derived bio degradable plastics and its mechanical property estimation, Proceedings of Second International Conference on Material Science (ICMS2017), 16-18 February, 2017, Tripura University (A Central University), Tripura, India.
Rejeesh C. R., Saju K. K., Methods and Materials for reducing Flammability behaviour of Coir Fibre Based Composite Boards: A Review, Proceedings of International conference on Recent Trends in Engineering and Material Science (ICEMS-2016), ISBN Number: 978-93-5254-230-7, March 17-19, 2016, Jaipur National University (JNU), Jaipur, India.
Rejeesh C. R., Saju K. K., "Effect of treatment of boron compounds on the thermal stability of medium density coir boards", Proceedings of 6th International conference on Advancements in Polymeric Materials (APM 2015), February 20 - 22, 2015, Indian Institute of Science (IISc) Bengaluru, India.