I can thread your barrel for standard 1/2 X 28 threads. On 10/22 barrels the front sight post is moved back and the muzzle threaded. Starting with the standard carbine 18" barrel OAL after work is slightly less than 17.5". Factory sights can be retained; taller sights may be needed to clear some suppressors.
Prices (includes insured return postage) DO NOT SEND RCVR
Threading muzzle and setback of front sight post $85
Removal of front sight post and threading of muzzle $60
Rechamber of 1022 barrels with modified factory chamber $55. (shortening of factory chamber).
I do not do chamber work to the takedown barrels at this time.
Rechamber Remington 597 is $75 and replacement with aftermarket barrels (customer provided) is $90
Contact me about other threading and chamber work.
All barrel work includes recrown as needed or requested.
Currently I am not making thread protectors. I suggest you go to DIPinc, pictured, for those and many other great products.
I can thread the muzzle of your S&W MP 15-22. Send the upper and I can safely remove your barrel, thread and reinstall barrel at no additional charge.
18" SS barrel cut and crowned to 16.5" with rear dovetail filled in with fitted aluminum blank.
Prior to use of any threaded barrel; install silencer, flash hider, muzzle break, whatever and then check through the bore to ensure clearance before firing. I cut the threads concentrically on lathe but like for you to boresight clearance prior to use if you would.
Contact me for other brand and barrel work.