Book:

  1. Samad, A., Sundar, V., Sannasiraj, SA., Halder, P., (Eds.) Ocean Wave Energy Systems: Hydrodynamics, Power Takeoff and Control Systems, Springer (Series: Ocean Engineering and Oceanography), 2021. ISBN: 978-3-030-78716-5.Link

Book Chapters:

  1. Halder, P., and Samad, A., Tip leakage effect on wells turbine, pp 555-560 in Renewable Energies Offshore, Editor: Guedes Soares, Taylor & Francis Group, London, ISBN: 978-1-138-02871-5.

  2. Halder, P., Das, T., Samad, A., and Mohamed, HM., Hysteresis Behavior for Wave Energy Conversion Device Under Alternative Axial Flow Conditions. In: Murali K., Sriram V., Samad A., Saha N. (eds) Proceedings of the Fourth International Conference in Ocean Engineering (ICOE2018). Lecture Notes in Civil Engineering, 2019, 23:717-724, Springer, Singapore. ISBN: 978-981-13-3134-3. Link

  3. Kumar, P.M., Halder, P., Samad, A., Combined Casing Groove and Blade Tip Treatment for Wave Energy Harvesting Turbine. In: Vijayan S., Subramanian N., Sankaranarayanasamy K. (eds) Trends in Manufacturing and Engineering Management. Lecture Notes in Mechanical Engineering,2021 Springer, Singapore, ISBN: 978-981-15-4745-4 2021. Link

  4. Kumar, P.M., Halder, P., Samad, A., Passive Flow Control Methods for Performance Augmentation in Air Turbines Used for Wave Energy Conversion – A Review, Ocean Wave Energy Systems: Hydrodynamics, Power Takeoff and Control Systems, Springer (Series: Ocean Engineering and Oceanography), 2021.

  5. Vijayasankar, V., Das, T.K., Kumar, P.M., Halder, P., Samad, A., Power Take-off Devices for Wave Energy Converters, Ocean Wave Energy Systems: Hydrodynamics, Power Takeoff and Control Systems (Ocean Engineering and Oceanography), Springer (Series: Ocean Engineering and Oceanography), 2021.

Refereed International Journals (Published / Accepted):

  1. Kumar, PM., Halder, P., Samad, A., Radiused Edge Blade Tip for a Wider Operating Range in Wells Turbine, Arabian Journal for Science and Engineering, 2021. https://doi.org/10.1007/s13369-020-05185-z (5-Year Impact Factor: 1.474)Link

  2. Halder, P., Kumar, PM., Coupled CAD-CFD automated optimization for leading and trailing edge of an axial impulse turbine blade, Ocean Engineering,213: 107769, 2020. link

  3. Halder, P., Takebe, H., Pawitan, K., Fujita, J., Misumi, S., and Shintake, T., Turbine Characteristics of Wave Energy Conversion Device for Extraction Power Using Breaking Waves. Energies, 2020, 13, 966. , (Impact Factor: 2.707) link

  4. Kumar, PM., Halder, P., Samad, A., Husain, A., Performance Enhancement of Wells Turbine: Combined Radiused Edge Blade Tip, Static Extended Trailing Edge and Variable Thickness Modifications, Ocean Engineering, 185:47- 58, 2019, (5-Year Impact Factor: 2.412) link

  5. Ranjith, B., Halder, P., Samad, A., High-performance ocean energy harvesting turbine design – Detailed flow analysis with blade leaning strategy. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 233:379-396, 2019. (Impact Factor: 1.694) link

  6. Halder, P., Mohamed, HM., and Samad, A., "Wave energy conversion: Design and shape optimization." Ocean Engineering, 150:337-351, 2018. (5-Year Impact Factor: 2.412) link

  7. Halder, P., Varghese, FA., Husain, A., and Samad, A., A numerical analysis of casing groove parameters on the performance of wave energy conversion device. International Journal of Aerodynamics, 6:125-136, 2018. link

  8. Kumar, PM., Halder, P., Samad, A., and Rhee SH., Wave Energy Harvesting Turbine: Effect of Hub-To-Tip Profile Modification. International Journal of Fluid Machinery and Systems, 11: 55-62,2018. link

  9. Halder, P., and Samad, A., Torque and Efficiency Maximization for a Wave Energy Harvesting Turbine: An Approach to Modify Multiple Design Variables, International Journal of Energy Research, 41:1014-1028, 2017. (Impact Factor: 3.009) link

  10. Halder, P., and Samad, A., Thévenin, D., Improved Design of a Wells Turbine for Higher Operating Range, Renewable Energy, 106:122–134,2017. (5-Year Impact Factor: 5.257) link

  11. Halder, P., Husain, A., Zunaid, M., Samad, A., Newtonian and non-Newtonian pulsatile flow through an artery with stenosis, The Journal of Engineering Research, 14: 191-205, 2017. link

  12. Halder, P., Samad, A., Kim, J.H., and Kim, K.Y., Film Cooling Characteristics of Upstream Ramp Enhanced Turbine Blade Surface Cooling, Heat Transfer Research,48:969–984,2017. (5-Year Impact Factor: 0.8) link

  13. Das, T., Halder, P., and Samad A., Optimal Design of Air Turbines for Oscillating Water Column Wave Energy Systems - A Review, The International Journal of Ocean and Climate Systems 8:37-49, 2017. link

  14. Halder, P., and Samad, A., Optimal Wells Turbine Speeds at Different Wave Conditions. International Journal of Marine Energy, 16:133–149, 2016. link

  15. Halder, P., and Samad, A., Marine Energy Turbine Performance: Effect of Blade Sweep, Energy Procedia, 90:245– 249, 2016. link

  16. Halder, P., and Samad, A., and Rhee, SH. Numerical Optimization of Wells Turbine for Wave Energy Extraction. International journal of naval architecture and ocean engineering, 9:11–24, 2016. (5-Year Impact Factor: 0.997) link

  17. Vuddagiri, A., Halder, P., and Samad, A., Chaudhuri A. Flow analysis of airfoil having different cavities on its suction surface. Progress in Computational Fluid Dynamics, 16(2):67-77, 2016. (5-Year Impact Factor: 0.952) link

  18. Halder, P., Samad, A., Kim, J.H., and Choi, Y.S., High performance ocean energy harvesting turbine design–A new casing treatment scheme, Energy, 86:219–231,2015. (5-Year Impact Factor: 5.582) link

  19. Halder, P., and Samad, A., Wave Energy Harvesting Turbine: Performance Enhancement, Procedia Eng., 116:97– 102, 2015. link

  20. Halder, P., and Samad, A., Casing Treatment of a Wave Energy Extracting Turbine, Aquatic Procedia, 4:516–521, 2015. link

Refereed Journals (Under review)

  1. Varghese, FA., Shams, M., Halder, P., Samad, A., Prasad, B.V.S.S.S., An Automated Optimization Framework for Turbomachinery Blade Shape Optimization, Sadhana Journal-Springer, 2018. (Under review).

National Conferences (Published / Accepted)

  1. Varghese, FA., Shams, M., Halder, P., Samad, A., Automated design optimization of turbine blade, National Conference on Multidisciplinary Design, Analysis, and Optimization, 23rd - 24th, March 2018, IISc, Bengaluru.

  2. Halder, P., Varghese, FA., Samad, A., Influence of the Blockage Ratio on the Performance of Marine Energy Device, LAMSYS2016 Conference, June 24-25, SDSC SHAR, ISRO Sriharikota 2016.

  3. Das, T., Halder, P., Samad, A., Wave Energy Conversion Device: Influence of Blade Profile Shape, LAMSYS2016 Conference, June 24-25, SDSC SHAR, ISRO Sriharikota 2016.

  4. Halder, P., Sabareesh, E., and Samad, A., Wells turbine stall, Proceedings of the Forty Second National Conference on Fluid Mechanics and Fluid Power, December 14-16, NITK Surathkal, Karnataka, India, 2015.

  5. Halder, P., and Samad, A., Numerical simulation of film cooling turbine blade. Ansys Convergence 2013 Regional Conference, May 17, Pune, India, 2013. (Best poster award)

  6. Halder, P., and Samad, A., CFD simulation of flow through wells turbine. National Conference on Mechanical Engineering: Retrospect and Prospect, February 2-3, Suri, West Bengal, India, 2013.

International Conferences (Published / Accepted)

    1. Halder, P., and Nagata, S, Performance Analysis of Floating Body Wave Energy Converter Using Vortex Method, OTEC magazine, March 11, 2021, Saga University, Saga 840-8502, Japan.

    2. Kumar, PM., Sadees, PG., Halder, P., and Samad, A., Unsteady RANS analysis of Wells turbine with static extended trailing edge, Proceedings of ASME Gas Turbine India Conference, December 5-6, 2019, Indian Institute of Technology Madras, Chennai, 600036, Tamil Nadu, India.

    3. Shintake T, Shirasawa, K., Fujita, J., Misumi, S., Halder, P. et. al., Results of Wave Energy Experiments in the Maldives, European Wave and Tidal Energy Conference (EWTEC-2019), Sept. 1-6, 2019, Napoli, Italy.

    4. Takebe, H., Shirasawa, K., Fujita, J., Misumi, S., Halder, P. and Shintake, T., Wave Power Measurement at Braking Wave Zone in Maldives using Horizontal-Axis Turbine WEC, European Wave and Tidal Energy Conference (EWTEC-2019), Sept. 1-6, 2019, Napoli, Italy.

    5. Kumar PM., Halder, P., and Samad, A., A tip leakage alteration technique to get high performing Wells turbine, InDA & IEEE-(OES) conference on Technologies for Renewable and Water (INDACON-2019), March 7-9,2019, Chennai, NIOT.

    6. Kumar PM., Halder, P., and Samad, A., Performance Analysis of Wells Turbine with Radiused Blade Tip, Proceedings of the 37th International Conference on Ocean, Offshore and Arctic Engineering, OMAE2018, June 17- 22, 2018, Madrid, Spain.

    7. Halder, P., Varghese, FA., B.S, GKT., Husain, A., Samad, A., Effect of Casing Groove Width on the Performance of Wells Turbine, International Conference on Applied Mechanics and Industrial Systems (ICAMIS-Oman-2016), Muscat, Oman, December 6-8, 2016.

    8. Halder, P., Samad, A., Rhee, SH., Unsteady flow and Hysteresis Behavior of a Turbine Used in a Wave Energy Harvesting Plant, Brain pool workshop, July 13, COEX-Seoul, 2016.

    9. Halder, P., Husain, A., Pulsatile flows through Stenosis, International Conference on Applied Mechanics and Industrial Systems (ICAMIS-Oman-2016), Muscat, Oman, December 6-8, 2016.

    10. Halder, P., Husain, A., Al-Rawahi, NZ, Zunaid, M., Newtonian and non-Newtonian fluid pulsatile flow through artery, International Conference on Advance Production and Industrial Engineering (ICAPIE-2016), Delhi, India, December 8-10, 2016.

    11. Halder, P., Samad, A., Seo, JH., Rhee, SH., Shim, HS., Kim, KY., Halder, P., Performance Prediction of a Turbomachinery Blade Though Numerical Modelling, Korean Society of Fluid Machinery Annual Conference, KSFMAC-2016, Nov.30-Dec.02, 2016, Yeosu, South Korea.

    12. R, S., Sadaphale, S., Halder, P.,Venkatesan, N., and Samad, A., Comparative Performance Analysis of Doubly-Fed Induction Generator with Wells and Impulse Turbines, Asian Wave & Tidal Energy Conference, October, Singapore, 2016.

    13. Kumar PM., Halder, P., Samad, A., Rhee, SH., Wave Energy Harvesting Turbine: Effect of Hub-To-Tip Profile Modification, 7th International Symposium on Fluid Machinery and Fluids Engineering, ISFMFE 2016, October 18- 22, 2016, Jeju, Korea.

    14. Halder, P., Samad, A., Rhee, SH., Kim, KY., Shim, HS.,Wave Energy Harvesting Turbine: Effect of Solidity, 7th International Symposium on Fluid Machinery and Fluids Engineering, ISFMFE 2016, October 18 - 22, 2016, Jeju, Korea.

    15. Halder, P., Das, T., and Samad, A., The unsteady flow analysis of a wave energy extracting turbine, International Conference on Computer Aided Engineering (CAE-2015), December 10-12, GITAM University, Hyderabad, India, 2015.

    16. Halder, P., and Samad, A., Effect of guide vane angle on wells turbine performance. Proceedings of ASME Gas Turbine India Conference, December 15-17, New Delhi, India, 2014.doi:10.1115/GTINDIA2014-8183.

    17. Halder, P., Performance Analysis of Ocean Energy Harvesting Turbine. Proceedings of ASME Gas Turbine India Conference, December 15-17, New Delhi, India, 2014.

    18. Halder, P., and Samad, A., Enhancement of film cooling effectiveness using upstream ramp. Proceedings of ASME Gas Turbine India Conference, December 1, IIT Bombay, India, 2012. doi:10.1115/GTINDIA2012-9672.

    19. Chandran, PMD., Halder, P., Panda, RK., Prasad, B.V.S.S.S., A Comparative Study of Film Cooling Effectiveness on a Flat Plate with Adiabatic and Conjugate Conditions for Different Hole Shapes, ASME-Turbo Expo 2012, June 11-15, 2012, Copenhagen, Denmark. doi:10.1115/GT2012-69142.

Poster Presentations/Workshop/Seminar:

  1. Halder, P., Shintake, T., Computational Study of Wave Breaking Turbine for Wave Energy Conversion, 4th Okinawa Marine Science Workshop, December 2019 (OIST).

  2. Assidiq, F., Pawitan, K., Halder, P., Takebe, H., Fujita, J., Misumi, S., Shintake, T., Numerical Study of OIST Wave Energy Generation, 4th Okinawa Marine Science Workshop, December 2019 (OIST).

  3. Andrean, H., Pawitan, K., Halder, P., Takebe, H., Fujita, J., Misumi, S., Shintake, T., Redistributing Power Spike on OIST WEC With A Guide Vane: Preliminary Experiment, 4th Okinawa Marine Science Workshop, December 2019 (OIST).

  4. Pawitan, K., Andrean, H., Halder, P., Takebe, H., Fujita, J., Misumi, S., Shintake, T., Empowering the World Through the Ocean: Surf-Zone WEC, from paper to reality, 4th Okinawa Marine Science Workshop, December 2019 (OIST).

  5. Participated “Indo-Australian Marine Renewable Energy Workshop “–organized by Dept. of Ocean Engineering, IIT Madras, India and Swinburne University of Technology, Australia, 4-5 April 2016.

  6. Participated “National Level Seminar on Offshore Energy – Present Scenario organized by School of Electrical Engineering, VIT Chennai, India, 21 January 2016.

  7. Participated in “First International Conference on Developing Unconventional Oil and Gas Resources (DUOG 2013) organized by IIT Madras, India, and LSES, London at IIT Madras, India and LSES, London, 1-3 March 2013.

  8. Participated “International Seminar on Talent Crisis in Global Oil and Gas Industry “–organized by IIT Madras, India and LSES, London, 16-17 March 2012.