HowTo

Here's how to use it.

When launched, it will immediately begin calculating your Hump-status, along with some additional work stats.

In the lower-right corner, the icon will bring up the settings screen to change the default work week.

This will bring up the Work Week editor. You can immediately start editing the work week by tapping and dragging to full in or clear out the blue squares indicating working time.

Swipe left or right to change the day you are editing.

The blocks represent half-hour increments, and should be filled in to identify your planned working time.

Filled in dark blue represents working time. Light blue areas are off time (lunch, after or before normal work time, breaks, etc.)

Additionally, the "Standard" button at the bottom will let you substitute a Standard work week.

The Standard work-week selection works like this:

The sliders at the top decide when the day starts, and how long your normal lunch break is (Which will be halfway through the day)

Then you click one of the buttons to decide which standard work week to apply.

• • 5-40 is your standard 8 hour workday, Monday thru Friday

  • 9-80A is a 9-hour work day, with 8 hour working Friday

  • 9-80B is a 9-hour work day, with an off Friday

  • Vacation is 0 hours of work this week

  • 35x5 is a 35 hour work week, 7 hours per day Monday thru Friday

  • 24x7 is 100% continuous work, all day every day

You can go back to the Custom edit screen later and update one of these standard work weeks to tweak one of these later as well.

Last tip, if you triple click the main screen, you have a few alternate representations of your work week.