03: C 10
NUMERICAL ANALYSIS PROGRAMS IN C
About the Program Disk
This README file gives instructions to the C programs on the disk. These programs are designed to run on a minimally configured computer. Minimal hard disk space plus a C compiler are all that is really needed. All of the programs are given as ASCII files. They can be altered using any editor or word processor that creates a standard ASCII file. These are commonly called a "Text Only" file. To run the programs you must have the appropriate software. The C programs follow recognized standards for the C language.
During the execution of some of the programs you will be asked questions of the form:
Has the function F been created in the program
To run the sample problems you should enter the response
Y (for Yes)
since the functions are embedded within the programs. The functions will need to be changed, however, if the programs are modified to solve other problems.
Some of the programs require the input of large amounts of data or generate extensive output. To enable the to be run quickly and efficiently, the input data can be placed in data files and the data files read by the program. When the output is likely to be extensive, the programs have been constructed so that it is convenient to place the output directly into an output file. The program will prompt you for the form of the input or output you would like to use. For example, when running the program for Neville’s method, ALGO31.C, using the defined data file ALGO31.DTA for the sample problem, you will first see a screen that states:
Choice of input method:
Immediately preceding the INPUT procedure?
1. Input entry by entry from the keyboard
2. Input data from a text file
3. Generate data using a function F
Choose 1,2, or 3 please
If the file links below will not open, use this link:
If you choose 1 you will need to enter all the data for the program from the keyboard, and any mistake in a data entry require the program to be rerun. Choosing 2 will lead to the input file ALG031. DTA. Choosing 3 causes the program to ask if the function has been defined. If you answer Y (for Yes), the program will assume that the function has been defined in the program and will use that function to produce the required data. If you answer N (for No), the program will assume that you want to change the function before continuing. Execution will consequently terminate so that the correct function can be entered into the program. Once this has been done, the program can be rerun
Copyright © 2015 by Richard L. Burden and Annette M. Burden
All rights reserved. No material this website may be reproduced, distributed, or transmitted in any form or by any means, including photocopying, recording, or other electronic or mechanical methods, without the prior written permission of the authors, except in the case of brief quotations embodied in critical reviews and certain other noncommercial uses permitted by copyright law. For permission requests, write or email one of the authors, addressed “Attention: Permissions,” at the address below.
Richard L. Burden/Annette M. Burden
Department of Mathematics & Statistics
Youngstown State University
One University Plaza
Youngstown, OH 44555-0001