Resolve Kodak Printer Error 3802

Kodak Printers are known for their performance and reliability. But sometimes, users encounter various printing issues. One such issue is error 3802. The Kodak Printer Error 3802 is caused due to the failure of the print head. Here, in this article, we will discuss how to resolve Kodak Printer Error Code 3802. If you have any query or need any assistance, then you can contact Kodak Printer Online Help.

Reasons behind Error Code 3802 in Kodak Printer

This error code mainly appears in Kodak printers when the installation of printer drivers is improper. Basically, drivers are the programs that make the peripherals of your system easier to use and allow external devices such as printers, scanners, and others to communicate with the operating system. In case, if the printer drivers are not installed correctly on your system, then this will give rise to the Error Code 3802 while using the Kodak printer.

Steps to fix Kodak Error 3802

Easy methods to troubleshoot the Error 3802 are given below: -

· Update the Printer Firmware: - First of all, you need to update the printer firmware by following the steps given below: -

1. Open the official Kodak printer website and open the download section.

2. Then, browse your model number and download the latest firmware.

3. After that, install the firmware and follow the on-screen instructions.

· Soft Reset Printing: -

1. First, shut down the printer and disconnect all the connected cables.

2. Then, wait until the printer is properly installed and press the power button for 10 seconds.

3. After that, plug in the power cable and turn on the printer.

· Clean And Reinstall The Print Head: - To clean and reinstall the print head, you need to follow the steps given below: -

1. First, open the printer doors to access the print head.

2. Then, remove the cartridges and the print head.

3. Next, clean the cartridges and print head with a cleaning solution.

4. After that, install the cartridges and print head in their position.

5. Finally, restart the printer and check if the error is resolved.

These are the easy steps you need to follow to fix this issue.