International conferences:
1. Venkatesan, M, M. Aravinthan, Das, S.K., Balakrishnan, A.R , "Fluid flow and boiling heat transfer in Mini-Channels", International Heat transfer Conference, (IHTC 14), Washington, August 2010. (IHTC14-23095), USA. DOI: 10.1115/IHTC14-23095
2. Venkatesan, M, Balakrishnan, A.R, Das, S.K., "Effect of tube diameter on Elongated Bubble Length in Mini channels", Thermal Issues in Emerging Technologies – Theory and applications, ThETA 3, December 2010, ThETA3_044, Cairo, Egypt, IEEE ExplorerDOI: 10.1109/THETA.2010.5766376
3. A.R. Balakrishnan, S.K. Das, M. Venkatesan and M. Aravinthan, "Experimental Investigation of Flow Boiling in Minichannel", 21st National and 10th ISHMT-ASME Heat and Mass Transfer Conference, Chennai, India, Dec 28-30, 2011
4. B. Pranav, B. Arun Kumar, T. Vetrichelvan, P. Deepak Raj, M. Venkatesan, M. Sridharan, "Thin Film Capacitor for Void Fraction Measurement in a Two-Phase System", International conference on Advanced Nanomaterials and Emerging Engineering Technologies (ICANMEET), IEEE Explorer DOI:10.1109/ICANMEET.2013.6609362
5. J. Navisa, T. Sravya, M. Swetha, Venkatesan. M, "The Effect of Bubble Size on Aeration Process", International conference on green energy technology”, ICGET-ABS-043, Asian journal of scientific Research 7(4), 482-487
6. S.Arunkumar, V.Kannan, M.Venkatesan,"Microcontroller based capacitance meter for a two phase flow sensor", 3rd International Conference on Advances in Recent Technologies in Electrical and Electronics, (ARTEE 2013), Bangalore, 2013, IEEE explorerDOI: 10.1049/cp.2013.2200
7. Arunaganesan S, Adhavan J, Shivakanth Reddy G, Venkatesan M, "Microcontroller based data acquisition system for cutting tool temperature measurement", IEEE International Conference on Computational Intelligence and Computing Research, (ICCIC), Madurai 2013, IEEE Explorer DOI:10.1109/ICCIC.2013.6724154.
8. Kritika Iyer, S Shridharani, S. Arunkumar, M. Venkatesan, "Application of Image processing for a Bubble Column Reactor", IEEE International Conference on Computational Intelligence and Computing Research, (ICCIC), Madurai 2013, IEEE Explorer DOI:10.1109/ICCIC.2013.6724169
9. R V N N Trilochan, D Vinodkumar Reddy, M Venkatesan, "Desalination using clay-pot based system", International conference on Innovative Technologies and Management for water security (INDACON 2014), NIOT, Chennai, 2014.
10. M.S.V Appaji,Sivakanth Reddy G, Arunkumar S,Venkatesan M,"An 8051 Microcontroller Based Syringe Pump Control System For Surface Micromachining", International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2014), NITK Surathkal, Procedia Materials Science, 5, 1791-1800, DOI:10.1016/j.mspro.2014.07.391, 2014.
11. Balachandar C, Arunkumar S, Venkatesan M, “Numerical Studies on Natural convection Heat transfer – Fins with Closed top”, International Mechanical Engineering Congress (IMEC 2014), NIT Tiruchirapalli, Applied Mechanics and Materials, vol.592-594, pp 1682-1686, DOI:10.4028/www.scientific.net/AMM.592-594.1682,2014
12. Mohan Krishna P, Santosh Shekar M, Ramakanth M, Thansekhar. M.R., Venkatesan M, “Analysis of Flow Mal-Distribution In A Cross-Flow Heat Exchanger”, International Mechanical Engineering Congress (IMEC 2014), NIT Tiruchirapalli, Applied Mechanics andMaterials Vols. 592-594, pp 1428-1432,DOI:10.4028/www.scientific.net/AMM.592-594.1428, 2014
13. K. Kathiresan, J. Adhavan, M. Venkatesan, “Experimental Investigation on Droplet Cooling Of Brakes”, International Mechanical Engineering Congress (IMEC 2014), NIT Tiruchirapalli, Applied Mechanics and Materials Vols. 592-594, pp1585-1589, DOI:10.4028/www.scientific.net/AMM.592-594.1585, 2014
14. V.Harshavardhan Reddy, Shaik Sadiq, S.Arunkumar, M.Venkatesan, “Investigation of Single Water Droplet Evaporation over Aluminium Surfaces using High Speed Camera and Image Processing” , International Mechanical Engineering Congress (IMEC 2014), NIT Tiruchirapalli, Applied Mechanics andMaterials, Vols. 592-594,pp.1642-1646, DOI:10.4028/www.scientific.net/AMM.592-594.1642,2014
15. D. Vikas, M. Venkatesan, P.S. Sivasakthivel, “Analysis of Impression Die Forging using ANSYS Explicit Dynamics”, IMEC 2014, International Mechanical Engineering Congress (IMEC 2014), NIT Tiruchirapalli, Conference proceedings, 299-302, 2014
16. Kannan V, Arunkumar S, Venkatesan M, “Artificial Neural Network based temperature Prediction in Heat sinks with Cross Cuts Fins”, International Conference on Intelligent Computing and Data Science, ICICDS, International Journal of Advanced Intelligence Paradigms, Vol. 7, Nos. 3/4, 292-301, 2014
17. Arunkumar S, Adhavan J, Venkatesan M, “Triple Recursive Artificial Neural Network based LASER pattern characterization of two phase flow”, International Conference on Intelligent Computing and Data Science, ICICDS, Paper ID : 1139, SASTRA University, 2014
18. Balachandar C, Arunkumar S, Venkatesan M, “Fuzzy Logic based Intelligent Flow Regime Identification in Two phase flows using Pressure sensor", International Conference on Intelligent Computing and Data Science, ICICDS, Paper ID: 1147, SASTRA University, 2014
19. Ramakanth M, Balachandar C, Venkatesan M, “Prediction of channel diameter to reduce Flow mal distribution in Radiators using ANN" International Conference on Intelligent Computing and Data Science, ICICDS, Indian Journal of science and technology, Vol 8(S9),341-346, 2015
20. Santhosh shekar. M, Mohan Krishna. P, Venkatesan M, “Artificial Neural Network based Prediction of Pressure Drop in Heat Exchangers", International Conference on Intelligent Computing and Data Science, ICICDS, Indian Journal of science and technology,Vol 8(S9), 86-91, 2015
21. Arunaganesan S, Adhavan J, Venkatesan M, "Flow regime identification based on combined Experimental Acoustic Measurement and Neural Network Prediction" International Conference on Intelligent Computing and Data Science, ICICDS, Paper ID: 1080, SASTRA University, 2014
22. Adhavan. J, Balachandar. C, Arunkumar. S, Venkatesan. M, "Determination of Two phase flow Slug Velocity and Length using Infrared Sensor", 5th International and 41st National Conference on Fluid Mechanics and Fluid Power, 12-14th December 2014, IIT Kanpur, India. Lecture Notes in Mechanical Engineering pp 1011-1017 Link
23. B. Boga Vishnu kanth , G. Sai Pavankumar, Arunkumar. S, Venkatesan. M, "Design of Motor Speed Control using LabVIEW for Air-flow control in Wind Tunnels", IEEE International Conference on Computational Intelligence and Computing Research (2014 IEEE ICCIC), IEEE Explorer DOI:10.1109/ICCIC.2014.7238328
24. Avinash Beerelli, Paluru Chandra dheeraj, Arunkumar S, Venkatesan M, "Automated Temperature Control in Batch Reactor using LabVIEW", IEEE International Conference on Computational Intelligence and Computing Research (2014 IEEE ICCIC), IEEE explorer DOI: 10.1109/ICCIC.2014.7238355
25. Adhavan J, Arunaganesan S, Ramachandran G, Venkatesan M, "LabVIEW based Online Phase Fraction Determination Using Dielectric Sensing", IEEE International Conference on Computational Intelligence and Computing Research (2014 IEEE ICCIC), IEEE explorer DOI:10.1109/ICCIC.2014.7238372
26. Pragadeesh M, Shanmuga Sundaram. M, Balachandar. C, Venkatesan M, "Heat transfer in Fins with Closed Top under Forced Convection Part I – Numerical Analysis", ICFTET 2015, International Journal of appliedengineering research, 10 (39), 29518-29522, 2015
27. Shanmuga Sundaram. M, Pragadeesh M, Arunkumar. S, Venkatesan M, "Heat transfer in Fins with Closed Top under Forced Convection Part II – ANN-GA optimization", ICFTET 2015, International Journal of applied engineering research, 10 (39), 29523-29527,2015
28.Chandra Dheeraj P, Avinash B, G Sai Pavan Kumar, P.S. Sivasakthivel, Venkatesan M, "Design of Two-Axis Automatic Sun Tracking System Assisted With Manual Control through LabVIEW",International conference on Mechanical and Manufacturing Engineering,ICMME 2015, Applied Mechanics and Materials Vols. 813-814 (2015) pp992-996, doi:10.4028/www.scientific.net/AMM.813-814.992
29. Arunkumar S, Harshavardhan Reddy .V, Sreevathsav. T. M and Venkatesan. M, “Hydrodynamic study of Artificial Splitting of Bubbles in a Bubble Column Reactor Part II – Numerical study”,International conference on Mechanical and Manufacturing Engineering, ICMME 2015, Applied Mechanics and Materials Vols. 813-814 (2015) pp 1023-1027,doi:10.4028/www.scientific.net/AMM.813-814.1023
30. Naveen S, Sriram T, Prithvi.S and Venkatesan M, "Hydrodynamic study of Artificial Splitting of Bubbles in a Bubble Column Reactor Part I – Image processing" International conference on Mechanical and Manufacturing Engineering, ICMME 2015, AppliedMechanics and Materials Vols. 813-814 (2015) pp 1018-1022,doi:10.4028/www.scientific.net/AMM.813-814.1018
31. G Ramchandran, K. Kathiresan, Venkatesan. M, "Brake Characteristics and Cooling Methods – A review", International conference on Mechanical and Manufacturing Engineering, ICMME 2015, Applied Mechanics and Materials Vols. 813-814 (2015)pp 949-953, doi:10.4028/www.scientific.net/AMM.813-814.949
32. Shreehari. E, Sanjay. S, Venkatesan. M, "Numerical analysis on Hollow cylindrical pin fins - natural convection",International conference on Mechanical and Manufacturing Engineering, ICMME 2015, Applied Mechanics and Materials Vols. 813-814 (2015)pp 713-717, DOI: 10.4028/www.scientific.net/AMM.813-814.713
33. Arunkumar S, Balachandar C, Venkatesan M, "Hybrid Genetic Algorithm – Neural Network – Genetic Algorithm Based Multi-Objective Optimization Technique For Design Of Heat Fins", 23rd National Heat and Mass Transfer Conference and 1st International ISHMT-ASTFE Heat and Mass Transfer Conference, IHMTC2015, 17-20 December, 2015, LPSC – ISRO, India
34. Arunkumar S, Pragadeesh M, Venkatesan M, "Integration Of Coupled Thermo-Mechanical Solver And Optimization Module For Thermal Stress Reduction In A Rolling Process", 23rd National Heat and Mass Transfer Conference and 1st International ISHMT-ASTFE Heat and Mass Transfer Conference, IHMTC2015, 17-20 December, 2015, LPSC – ISRO, India
35. K.Akash, M.Pramoth Kumar, N.Venkatesan, M.Venkatesan, "A single acting syringe pump based on Raspberry Pi (SOC)", IEEE International Conference on Computational Intelligence and Computing Research (2015 IEEE ICCIC), December 2015, IEEE explore DOI: 10.1109/ICCIC.2015.7435694
36. Keerti R, Srialamelumangai M, Padmapriya R, Mithran N and Venkatesan M, "Automated stabilized flight of quad rotor using Arduino 2560 platform", International Conference on Design and Manufacturing, ICONDM16, IIITDM Kancheepuram, Chennai December 16-17, 2016
37. R Madumitha , S Arunkumar and M Venkatesan , "Topology optimization of Pre-Mixing zone in a T shaped Micromixer for enhanced mixing", Sixth International congress onComputational Mechanics and Simulation , IIT Bombay, Powai, Mumbai, 27 June – 1July, 2016
38. R Madumitha , S Arunkumar, C Balachandar and M Venkatesan, "Numerical Heat transfer analysis of Pin fin with Ellipsoidal beads", Sixth Internationalcongress on Computational Mechanics and Simulation , IIT Bombay, Powai, Mumbai,27 June – 1 July, 2016
39. Karthikeyan KK, Krishnah S, S Arunkumar and M Venkatesan , “Numerical Analysis of Micromixers with Flow Disturbing Ribs” , Sixth International congress on Computational Mechanics andSimulation , IIT Bombay, Powai, Mumbai, 27 June – 1 July, 2016
40. R Madhumitha, Arunkumar S, Ravichandran V, Venkatesan M, "Effect of Wall Surface Roughness on Droplet Cooling Over a Rectangular Heated Plate in an Enclosure", 12thInternational Conference on Heat Transfer, Fluid Mechanics and Thermodynamics(HEFAT2016), Costa del Sol, Spain, 11 – 13 July 2016
41. R Madhumitha, Arunkumar S, Ravichandran V, Venkatesan M, "Analysis of Fluid-Structure Interaction in Micromixers with Vibrating Walls", 12th International Conference on HeatTransfer, Fluid Mechanics and Thermodynamics (HEFAT2016), Costa del Sol, Spain, 11 – 13 July 2016
42. M Pramoth Kumar, K Akash and M Venkatesan, "Scotch-Yoke mechanism for a syringe pump – A case study", International conference on Advances in Materials & Manufacturing Applications, IOP Conf. Series: Materials Science and Engineering 149 (2016) 012221 doi:10.1088/1757-899X/149/1/012221
43. Suwathy R, Karnati Manikanta Reddy, Pramoth Kumar M, M Venkatesan, "Droplet impinging behavior on surfaces Part I – Hydrogen Peroxide on Aluminium Surface", International conference on Advances in Materials & Manufacturing Applications, IOP Conf. Series: Materials Science and Engineering 149 (2016) 012219 doi:10.1088/1757-899X/149/1/012219
44. Sangavi. S, Balaji. S, Mithran. N, Venkatesan. M, "Droplet impinging behavior on surfaces Part II - Water on Aluminium and Cast Iron Surfaces", International conference on Advances in Materials & Manufacturing Applications, IOP Conf. Series: Materials Science and Engineering 149 (2016) 012220 doi:10.1088/1757-899X/149/1/012220
45. T Subha Sankari, S Sangavi, T Paneerselvam, R Venkatraman and M Venkatesan, "Forging of Naval Brass (ASTM B16) - Finite Element Analysis using Ls Dyna", International conference on Advances in Materials & Manufacturing Applications, IOP Conf. Series: Materials Science and Engineering 149 (2016) 012126 doi:10.1088/1757-899X/149/1/012126
46. Madhumitha. R, Arunkumar. S, Ravichandran V, Venkatesan M, "Finite element based multi objective topology optimization for enhanced mixing with reduced pressure drop", ASME 2016 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC 2016, Charlotte, North Carolina, USA, Doi:10.1115/DETC2016-60034
47. Sidarth S, Srialamelumangai M, Padmapriya R, Venkatesan M, "Motion Control analysis of a quad rotor system Part I – Experiments", 2016 IEEE International Conference on Computational Intelligence and Computing Research, December 15-17, 2016, Chennai IEEE Explorer DOI: 10.1109/ICCIC.2016.7919522
48. Venkatasundarakumar T S, Suwathy R, Haripriya T M, Venkatesan M, "Motion control analysis of a quadcopter system Part II – Modelling", 2016 IEEE International Conference on Computational Intelligence and Computing Research, December 15-17, 2016, Chennai IEEE Explorer DOI: 10.1109/ICCIC.2016.7919523
49. Akash K, Sangavi S, Venkatesan M, "Double acting syringe pump using a Rack and Pinion mechanism - Simulink model", 2016 IEEE International Conference on Computational Intelligence and Computing Research, December 15-17, 2016, Chennai IEEE Explorer DOI: 10.1109/ICCIC.2016.7919585
50. Tejaswi B, Sivasakthivel P S, Venkatesan M, "Image processing algorithm for droplet measurement after impingement", 2016 IEEE International Conference on Computational Intelligence and Computing Research, December 15-17, 2016, Chennai IEEE Explorer DOI: 10.1109/ICCIC.2016.7919580
51. Pragadeesh M, Suwathy R and Venkatesan M, "Numerical Analysis of Scaled Model Class 8 Trucks with Top Fairing in Gap Width", International Conference on Design and Manufacturing, ICONDM16, IIITDM Kancheepuram, Chennai December 16-17, 2016
52. Pramoth Kumar M, Nethraja Vuppala and Venkatesan M, "Analysis of actuating mechanisms for a Double acting Syringe pump", International Conference on Design and Manufacturing, ICONDM16, IIITDM Kancheepuram, Chennai December 16-17, 2016
53. Subha Sankari T, Paneerselvam T, Venkatraman R and Venkatesan M, "Analyses of Impression die forging of Aluminum 6061 using LS DYNA", International Conference on Design and Manufacturing, ICONDM16, IIITDM Kancheepuram, Chennai December 16-17, 2016
54. Thirumalaikumaran S K, Mithran N, Suwathy R and Venkatesan M, "A note on using VOF method for polymer bead manufacturing", International Conference on Design and Manufacturing, ICONDM16, IIITDM Kancheepuram, Chennai December 16-17, 2016, International Journal of Plastics Technology, 22 (1), 170-176, 2018, https://doi.org/10.1007/s12588-018-9209-8
55. Shrivignesh K, Suwathy R, Thirumalaikumaran S K, Venkatesan M, "Two phase flow of H2O2-Air Mixture in Mini Channels - Flow regimes", National Aerospace Propulsion Conference, NAPC-2017, March 15-17, 2017, IIT Kanpur, Paper No. NAPC-2017-083
56. Dhinesh K S, Subha Sankari T, Paneerselvam T, Venkatesan M, "Simulation and numerical analysis of warm stamping of 6061 Aluminum alloy", International Conference on Advances In Materials, Manufacturing And Applied Sciences, 30-31st March 2017, Chennai, Materials Today: Proceedings 16 (2019), Part 2, 2019, Pages 598-603
57. Rupak Kumar,Mithran N,Thirumalaikumaran S K,Venkatesan M, "Image Processing Technique for slug length measurement during Mixing and Separation of Two-phase Flows in T sections", International Conference on Advances In Materials, Manufacturing And Applied Sciences, 30-31st March 2017, Chennai, Materials Today: Proceedings 16 (2019) 738–743
58. Balaji S, Venkatesan M,"BLDC Motor control based on duty cycle", 2017 IEEE International Conference on Computational Intelligence and Computing Research, Coimbatore, December 14-16, 2017, IEEE Explore DOI: 10.1109/ICCIC.2017.8524307
59. P. Mohith, S. Vijaya Raghavan, P. M. Siva, N. Mithran, M. Venkatesan, "Concentration variation detection of Hydrogen peroxide using an IR sensor ", 2017 IEEE International Conference on Computational Intelligence and Computing Research, Coimbatore, December 14-16, 2017, IEEE Explore DOI: 10.1109/ICCIC.2017.8524351
60. Subhasankari T, Sharvin Infant A, Viswasundar A, M. Venkatesan, N. Mithran, "Integration of Hall sensor in a 3D printer as a limit switch", 2017 IEEE International Conference on Computational Intelligence and Computing Research, Coimbatore, December 14-16, 2017, IEEE Explore DOI: 10.1109/ICCIC.2017.8524539
61. N.Nageshwar, S.Gokula Krishnaa, S.Lakshmi Narasimhan, M.Venkatesan, "Thrust measurement using Force Sensitive Resistor", 2017 IEEE International Conference on Computational Intelligence and Computing Research, Coimbatore, December 14-16, 2017, IEEE Explore DOI: 10.1109/ICCIC.2017.8524169
62. Vishwa Krishna. R , Vasudevan C, Mithran. N, Venkatesan. M, "Image processing for slug length measurement in a serpentine channel", 2017 IEEE International Conference on Computational Intelligence and Computing Research, Coimbatore, December 14-16, 2017
63. Aravind Krishna madhavan, D.Subrahmanyam, P. R. Namratha, R. Suwathy, M. Venkatesan , "Bubble behavior in a CD nozzle – Image processing technique", 2017 IEEE International Conference on Computational Intelligence and Computing Research, Coimbatore, December 14-16, 2017, IEEE Explore DOI: 10.1109/ICCIC.2017.8524584
64. S. Divya, S. Kausalya, N. Mithran, M. Venkatesan, "Non-invasive Infrared glucometer ", International conference on Systems Design and Engineering, SASTRA Deemed University, Thanjavur, December 11-12, 2017, International Journal of Pure and Applied Mathematics, Volume 118 No. 18 2018, 2253-2257
65. S. Aafrin Sulthana, T. Marieswaran, N, Braghadesh, N. Mithran, M.Venkatesan, "Slug-bubble regime identification in a square channel using a IR Sensor", 3rd International Conference on Design, Analysis, Manufacturing and Simulation, ICDAMS 2018, Chennai, 6-7 April, 2018, MATEC Web of Conferences 172, 01002 (2018), https://doi.org/10.1051/matecconf/201817201002
66. Vijaya Raghavan S, Siva P. M., Neethish Kannaa S.P., Mohith P., Mithran N., Venkatesan M., "Measurement of hydrogen peroxide concentration using IR sensor – A numerical model", 3rd International Conference on Design, Analysis, Manufacturing and Simulation, ICDAMS 2018, Chennai, 6-7 April, 2018, International Journal of Pure and Applied Mathematics, Volume 119 No. 10 2018, 1979-1983
67. Sathiyaraj R, Rakesh R, Mithran N, Venkatesan M, "Enhancement of heat transfer in phase change material using graphite-paraffin composites" 3rd International Conference on Design, Analysis, Manufacturing and Simulation, ICDAMS 2018, Chennai, 6-7 April, 2018, MATEC Web of Conferences 172, 02001 (2018), https://doi.org/10.1051/matecconf/201817201002
68. Seetharaman S, Madhumitha R, Venkatesan M, Balakrishnan AR, "Layout Optimization of passive micro mixers with Cylindrical Obstacles", 16th International Heat Transfer Conference,, IHTC16-21811, IHTC-16, August 10-15, 2018, Beijing, China, https://www.ihtcdigitallibrary.com/conferences/ihtc16,2957e3ba57c4ca4a,5020b80651519816.html
69. Vishwak Venkatesh, Dhinesh K S, Aditya Srinivasan D, Venkatesan M, "Non-Newtonian fluid pumping using 3D printed mechanism" #205, 3rd International Conference on Design, Analysis, Manufacturing and Simulation, ICDAMS 2018, Chennai, 6-7 April, 2018, International Journal of Pure and Applied Mathematics, Volume 118 No. 20 2018, 89-93
70. Sanjay Vasanth.KB, Gokul Raj.G, Venkatesan M, "Numerical model for concentration measurement during decomposition of H2O2 over silver catalyst", #190, 3rd International Conference on Design, Analysis, Manufacturing and Simulation, ICDAMS 2018, Chennai, 6-7 April, 2018, MATEC Web of Conferences 172, 01008 (2018) https://doi.org/10.1051/matecconf/201817201008
71. Vishwa Krishna. R , Suwathy. R, Pragadeesh. M , Venkatesan. M, "Drag reduction in a Class 8 Truck - Scaled down Model ", 3rd International Conference on Design, Analysis, Manufacturing and Simulation, ICDAMS 2018, Chennai, 6-7 April, 2018 MATEC Web of Conferences 172, 01003 (2018) https://doi.org/10.1051/matecconf/201817201003
72. Vishwa Krishna R, Vasudevan C, Seetha raman S, Manoj SLN, Venkatesan. M, "Effect of sinusoidal AC electric fields on bubble shapes under pseudo-nucleate boiling conditions", National Conference on Critical Heat Flux and Multiphase Flow, Indian Institute of Technology BHU, December 22-23, 2018, https://inis.iaea.org/search/search.aspx?orig_q=RN:52014782
73. Janaki. M, Neethish Kannaa S.P, Soundarya. K, Venkatesan. M, "Two phase flow characterization using a Laser-Photo resistor arrangement", National Conference on Critical Heat Flux and Multiphase Flow, Indian Institute of Technology BHU, December 22-23, 2018, https://inis.iaea.org/search/search.aspx?orig_q=RN:52014755
74. Aruli. K.U, Anand. S, Shrivignesh. K, Mithran. N, Venkatesan. M, Effect of self re-wetting fluids on bubble coalescence, National Conference on Critical Heat Flux and Multiphase Flow, Indian Institute of Technology BHU, December 22-23, 2018, https://inis.iaea.org/search/search.aspx?orig_q=RN:52014745
75. Neethish Kannaa S.P, Janaki. M, Soundarya. K, Venkatesan. M, Effect of tube diameter on boundary layer development in a symmetrical airfoil, 7th International and 45th National Conference on Fluid Mechanics and Fluid Power (FMFP), December 10-12, 2018, IIT Bombay, Mumbai, India
76. Soundarya. K., Neethish Kannaa S.P. , Janaki. M., Venkatesan. M., Mithran. N. "Measurement of slug length using a IR transceiver during catalytic decomposition of H2O2 ", 4th International Conference on Recent Advancements in Chemical, Environmental and Energy Engineering (RACEEE 2019), February 14 - 15, 2019, Chennai, India
77. Jaladanki Srinivas, Rage Yaswanth, Neethish Kannaaa, Venkatesan M, "Liquid Film thickness measurement in mini tubes using LASER-Photo resistor", 4th International Conference on Recent Advancements in Chemical, Environmental and Energy Engineering (RACEEE 2019), February 14 - 15, 2019, Chennai, India
78. Seetharaman S, Manoj Sln, Sai Krishna P and Venkatesan M, "Condensation Heat Transfer Enhancement using an applied electric field on Structured surfaces", 25th National and 3rd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC 2019), December 28-31, 2019 IIT Roorkee, Uttarakhand
79. Sai Yashodhar Reddy M, Devaprasanth A, Sri Lalit Bala T, Venkatesan M and Mithran N, "Study of Auger and Moineau pumps for 3D clay printing", International Mechanical Engineering Congress, IMEC - 2019, 29th November - 1 st December, NIT Tiruchirapalli, Tamilnadu, India
80. Sai Krishna P, Seetharaman S, Mithran N and Venkatesan M, "An infrared sensor for measuring concentration of water-nano silica mixture", International Mechanical Engineering Congress, IMEC - 2019, 29th November - 1 st December, NIT Tiruchirapalli, Tamilnadu, India
81. Raam Kumar S, Sridhar S, Venkatraman R, Venkatesan M, "Polymer additive manufacturing of ASA structure: Influence of printing parameters on mechanical properties", 2nd International Conference on Recent Trends in Metallurgy, Materials Science and Manufacturing (IMME19), December 27-28, NIT Tiruchirappalli, India, Materials Today: Proceedings https://doi.org/10.1016/j.matpr.2020.04.500
82. T.K.Jayaraghul, K.Karthik, Appili Yaswanth , M. Venkatesan, "Nozzle flow characteristics of P.E.E.K (Poly-ether ether ketone) material used in 3D-Printing", Material TECH 2021, NIT Raipur, January 9-10, 2021, Materials Today: Proceedings https://doi.org/10.1016/j.matpr.2021.02.004
83. Renugadevi T, Hari Prasanth D , Appili Yaswanth, Muthukumar K, Venkatesan M, "Design analysis and Work load characteristics of a Micro data Center", SESBT 2021, 23rd – 24th July 2021, Vellore Institute of Technology ( VIT ) Chennai, IOP Conf. Series: Earth and Environmental Science 850 (2021) 012018, doi:10.1088/1755-1315/850/1/012018
84. Soundarya K, Monica S, Abhisheka M S and Pradikshan A K, Venkatesan M, "Vane Induced Two Phase Flow Mixing", SESBT 2021, 23rd – 24th July 2021, Vellore Institute of Technology ( VIT ) Chennai, IOP Conf. Series: Earth and Environmental Science 850 (2021) 012022,doi:10.1088/1755-1315/850/1/012022
85. Suwathy R, Anirudh Balaji N S, Haribalaji R, Venkatesan M, "Low concentration hydrogen peroxide decomposition inside a minichannel with annular silver catalyst", SESBT 2021, 23rd – 24th July 2021, Vellore Institute of Technology ( VIT ) Chennai, Materials Today: Proceedings, Volume 51, Part 3, 2022, Pages 1631-1636
86. Lakshmanan S, Venkatesan M, Computational Heat Transfer Analysis of Perforated Annular Fin With Highly Conductive Insert Under Forced Convection, 2nd National and 1st International conference on Fluid Flow and Thermal Sciences, September 24-25, 2021, SVNIT Surat, Gujarat, India, https://doi.org/10.1007/978-981-19-7214-0_28
87. Mithran. N, Sowndarya. K, Venkatesan. M , Shape and Size effects of Glass Mini-Channels on Infrared Sensors in Air-Water Two Phase Flow, 2nd National and 1st International conference on Fluid Flow and Thermal Sciences, ICAFFTS-2021, September 24-25, 2021, SVNITSurat, Gujarat, India, https://doi.org/10.1007/978-981-19-3379-0_27
88. Raghunath T, Lakshmanan S, Karthik S, Sridhar S, Marimuthu P, Venkatesan M, Cooling system for frictional heat generation reduction in spur gears, 3rd International Conference on Sustainable Energy Solutions for a Better Tomorrow (SESBT 2022), July 23 – 24, 2022, VIT Chennai
89. Baddila Geethika, Anumukonda Revanth Venkat, Kondepudi Durgesh, M. Venkatesan, Computational Heat transfer analysis of Capsulated liquid metal fins, 3rd International Conference on Sustainable Energy Solutions for a Better Tomorrow (SESBT 2022), July 23 – 24, 2022, VIT Chennai, DOI 10.1088/1755-1315/1161/1/012013
90. G.V.R. Aditya Ganesh,T. Raaja alaghappan, S. Sridhar, R. Venkatraman, M. Venkatesan Path Optimization for Nozzle by using Ant Colony Algorithm during Fused Filament Fabrication, 3rd International Conference on Sustainable Energy Solutions for a Better Tomorrow (SESBT 2022), July 23 – 24, 2022, VIT Chennai
91. Sowparnika S, Deepika S, Ankita Yadav, Shrinidhi S, Venkatesan M, Sridhar S, International Conference on Recent Advances in Design and Manufacturing (RADM-2024), National Institute of Technology, 28-30 June 2024, Patna.
92. Omprabba K C, Shrinidhi S, Sowndarya K, Venkatesan M, Effect of porous medium on splitting of bubbles for aeration process, 4th International Conference on Waste, Energy and Environment (ICWEE-2024), Sathyabama Institute of Science and Technology, 3rd – 5th July, 2024, Chennai
93. Sowndarya K, Lakshana S, Aravind S, and Venkatesan M, Machine Learning assisted Lens Optimization for IR Ray Collimation in Mini tubes, Paper id - 20, 9th International conference on recent advancements in chemical, Environmental and Energy Engineering, (RACEE 2025), SSN College of Engineering, Chennai, February 6-7, 2025
National conferences:
1. M.R.Thansekhar, M.Venkatesan, “Numerical Investigation of Convective Heat Transfer from a Fin Array”, National Conference on Fluid Flow and Control, Bharathiyar University, Coimbatore, March 2003.
2. M.R.Thansekhar, M.Venkatesan, “Laminar Free Convection in a Square Cavity with a Thin Fin on the Cold Wall”, National Conference on Mechanical Engineering, M.S.R.I.T, Bangalore, March 2004.
3. M.R.Thansekhar, M.Venkatesan,“Buoyancy induced flow in a partially partitioned square enclosure” National Conference on Fluid Flow and Control, Bharathiyar University, Coimbatore, March 2004.
4. M.R.Thansekhar, M.Venkatesan,“Natural Convection in a Cavity with Permeable Partitions”, National conference on Fluid Mechanics and Fluid Power, Jadavpur University, December 2004.
5. M. Santosh Shekar, M. Ramakanth, Mohan Krishna. P, Venkatesan. M, “Flow mal-distribution in a cross-flow heat exchanger”, Fortieth National Conference on Fluid Mechanics and Fluid Power, NIT Hamirpur, Conference proceedings, PP. 181-189, 2013
6. S. Sudarshan, K. Vasudevan, M. Pragadeesh and M. Venkatesan, "Enhanced Turbulent Heat Transfer in a Square Duct with Baffles", Seminar on Heat transfer and fluid flow (HTFF-15), IIT Madras, Chennai, Journal of Energy Heat and Mass Transfer 37, 85-94, 2016
7. Samudrala Mohan Venkatesh, R. Kishoor Kumar, R. Ashwin Kumar and M. Venkatesan, "Heat Transfer Study of Screw type Fin under Forced Convection", Seminar on Heat transfer and fluid flow (HTFF-15), IIT Madras, Chennai, Journal of Energy Heat and Mass Transfer 37, 109-118, 2016
8. R. Madhumitha, S. Arun Kumar and M. Venkatesan, "Numerical Study on the evaporation of liquid droplets in a rectangular Enclosure", Seminar on Heat transfer and fluid flow (HTFF-15), IIT Madras, Chennai, Journal of Energy Heat and Mass Transfer 37, 161-172, 2016
9. S. Sangavi, T. Subha Sankari, S. Arunkumar and M. Venkatesan, "Experimental Analysis of Impact Droplet Cooling over Stainless Steel Plates", Seminar on Heat transfer and fluid flow (HTFF-15), IIT Madras, Chennai, Journal of Energy Heat and Mass Transfer 37, 187-194, 2016
10. R.Suwathy, S.K.Thirumalaikumaran, N.Mithran, M.Venkatesan, A.R.Balakrishnan, "Two phase flow of Hydrogen Peroxide–Air mixture in Mini channels – Mixture section effects", CHEMCON 2016
11. Sanjeeva Raj U, Srikanth P M, Lakshana S, Shriram S B, Venkatesan M, "Lubricant contaminant detection using IR Transceivers", CHEM-228, Accepted, IICHE-CHEMCON 2025, Chidambaram Annamalai University, December 27-30, 2025
12. Aravind S, Girinath K, Bhuvaneshwaran M, Venkatesan M, "A mobile fluidized bed system for drying paddy", Accepted, CHEM-249, IICHE-CHEMCON 2025, Chidambaram Annamalai University, December 27-30, 2025
13. Dhinesh Sundar R, Athithya U K, Vasudevan B, Rajan N, Venkatesan M "Biochar characterization from Coconut shell and cotton stalk", Accepted, CHEM-267, IICHE-CHEMCON 2025, Chidambaram Annamalai University, December 27-30, 2025