Publications

Refereed Journals Articles

1. Shohag MS, Eze VO, Adams G, Carani LB, Okoli OI. Fully Integrated Mechanoluminescent Devices with Nanometer-Thick Perovskite Film as Self-Powered Flexible Sensor for Dynamic Pressure Sensing. ACS Applied Nano Materials, 2020. https://doi.org/10.1021/acsanm.0c01168

2. Shohag MS, Adams G, Eze VO, Ichite T, Carani LB, Okoli OI. An efficient mechanoluminescent light harvesting method using perovskite for highly sensitive flexible pressure sensor application. ACS Applied Materials & Interfaces (Under review, manuscript number: am-2019-20830v), 2020.

3. Shohag MS, Luster E, Animashaun C, Okoli OI. Additively manufactured lattice structures infiltrated with silicone for high energy absorption. (In preparation for Additive Manufacturing), 2020.

4. Shohag MS, Tran SA, Ndebele T, Adhikari N, Okoli OI. Designing and implementation of triboluminescent materials for real-time load monitoring. Materials & Design. 2018; 153:86–93.

5. Shohag MS, Jiang Z, Hammel EC, Braga Carani L, Olawale DO, Dickens TJ, Wang H, Okoli OI. Development of friction-induced triboluminescent sensor for load monitoring. Journal of Intelligent Material Systems and Structures. 2017; 29: 883-895.

6. Shohag MS, Ndebele T, Okoli O. Real-time damage monitoring in trailing edge bondlines of wind turbine blades with triboluminescent sensors. Structural Health Monitoring. 2018;18: 1129-40.

7. Shohag MS, Okoli OI. Nonparasitic behavior of embedded triboluminescent sensor in multifunctional composites. Composites Part A: Applied Science and Manufacturing. 2018; 116: 114-125.

8. Shohag MS, Dessureault Y, Ndebele T, Joshi K, Olawale DO, Dickens TJ, Okoli OI. Enhanced fabrication process for in situ triboluminescent optical fiber sensor for multifunctional composites. Measurement 2018; 121: 240-248.

9. Adams G, Eze VO, Shohag MS, Simpson R, Parker H, Okoli OI. Anti-solvent assisted preparation of self-powered triple cation perovskite photodetector. (Submitted, manuscript number is smll.201902372), Small, 2019.

10. Eze VO, Adams R, Shohag MS, Okoli OI, Silver additive incorporation for enhanced performance of inorganic CsPbIBr2 perovskite solar cells. (Submitted, manuscript number is adfm.201904037), Advanced Functional Materials, 2019.

11. Shohag MS, Hammel EC, Olawale DO, Okoli OI. Damage mitigation techniques in wind turbine blades: A review. Wind Engineering. 2017; 41:185-210.

12. Armbrister C, Shohag MS, Scheiner M, Okoli OI. The fabrication of mechanoluminescent composites manufactured via the displaced foam dispersion technique. Plastics, Rubber and Composites: Macromolecular Engineering. 2019; 48:191-200.

13. Hasan MM, Shohag MS, Azeem A, Paul SK. Multiple criteria supplier selection: A fuzzy approach. International Journal of Logistics Systems and Management. 2015; 20:429-446.

International Conferences

1. Shohag MS, Hammel EC, Olawale DO, Okoli OI. Adhesive bond failure monitoring with triboluminescent optical fiber sensor. Proc SPIE 9803, Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, Las Vegas, Nevada, USA, 20^th April 2016. p. 98034Y1-8. https://doi.org/10.1117/12.2223899

2. Shohag MS, Hammel EC, Dessureault Y-S, Joshi KS, Olawale DO, Dickens TJ, Okoli OI. Triboluminescent sensor network for load monitoring in wind turbine blades. CAMX Conference Proceedings. CAMX – The Composites and Advanced Materials Expo Anaheim, CA, September 26-29, 2016. p. 190-203.

3. Shohag MS, Ndebele T, Olawale DO, Okoli OI. Advances of bio-inspired in-situ triboluminescent optical fiber sensor for damage and load monitoring in multifunctional composite. Proceedings of the 11th International Workshop on Structural Health Monitoring. Sanford, CA, USA, 12-14^th September 2017.

4. Shohag MS, Joshi K, Ndebele T, Pollard M, Tran S, Carani LB, et al. Active sensors for load and damage monitoring in wind turbine blade: a hybrid manufacturing technique. 9th European Workshop on Structural Health Monitoring. Manchester, United Kingdom, 10-13^th July 2018.

5. Carani LB, Shohag MS, Eze VO, Adams G, Okoli OI. Embedded Mechanoluminescent-Perovskite Sensor in Multifunctional Composite (Submitted). 10^th European Workshop on Structural Health Monitoring. Palermo, Italy, 6-9^th July 2020.

6. Shohag MS, Adams G, Eze VO, Ichite T, Carani LB, Okoli OI. Mechanoluminescent-perovskite pressure sensor for structural health monitoring. Proceedings of the 12th International Workshop on Structural Health Monitoring. Sanford, CA, USA, 10-12^th September 2019. p. 1199-1206.

7. Armbrister C, Shohag MS, Okoli OI. Characterization of triboluminescent enhanced glass fiber composites manufactured via displaced foam dispersion technique. 21^st International Conference on Composite Materials. Xi’an, China, 20-25^th August 2017.

Book Chapters

1. Olawale, D.O., Fontenot, R.S., Shohag, M.S., Okoli, O.I. Introduction to Triboluminescence. In: Olawale, O.D., Okoli, O.I., Fontenot, S.R., Hollerman, A.W., editors. Triboluminescence: Theory, Synthesis, and Application. Cham: Springer International Publishing; 2016. p.1-16. [link]

2. Hammel EC, Shohag MS, Olawale DO, Okoli OI, Ravi VA. Pressurless infiltration of Al2O3 preform containing aligned two-dimensional channels with Al-Mg-Si alloy. In: Salem J, Singh D, editors. Mechanical Properties and Performance of Engineering Ceramics and Composites XI. John Wiley & Sons, Inc.; 2017. p. 207-15. [link]

Scientific Poster Presentations/Competitions

1. Shohag MS and Okoli OI. Active sensors for load and damage monitoring in composite structures. Research Competition 2018, Florida Statewide Graduate Student Research Symposium, the Florida State University, Tallahassee, Florida, 20 April 2018. (1^st place)

2. Shohag MS, Ndebele T, Tran SA, Okoli OI. Real-time damage monitoring in trailing edge bondlines of wind turbine blades with triboluminescent sensors. CAMX – The Composites and Advanced Materials Expo, 12-14 December 2017.

3. Shohag MS and Okoli OI. Triboluminescent Sensors for load and damage monitoring in composite structures. Research Competition 2017, Florida Statewide Graduate Student Research Symposium, the University of South Florida, Tampa, Florida, 21 April 2017. (2nd place)

4. Shohag MS and Okoli OI. Triboluminescent Sensors for load and damage monitoring in composite structures. Poster competition 2017, FAMU graduation week, 14^th March 2017. (2nd place)

5. Shohag MS, Hammel EC, Olawale DO, Dickens TJ, Okoli OI. Development of triboluminescent sensors for wind turbine blades. CAMX Conference. Anaheim, CA, September 26-29, 2016. CAMX – The Composites and Advanced Materials Expo 2016.

6. Shohag MS, Hammel EC, Olawale DO, Okoli OI. Adhesive bond failure monitoring with triboluminescent optical fiber sensor. Poster competition 2016, FAMU graduation week, March 2016.

7. Hammel EC, Hodges W, Campa J, Shohag MS, Olawale DO, and Okoli OI. (presented 2016, May). Identifying important processing factors of reliable advanced ceramic preforms. Paper presented at IIE Annual Conference and Expo, Anaheim, California, USA; May 21-24, 2016, IIE. (International)

Awards and Grants

1. Honorable Mention in Ph.D. category, 2018 SAMPE University Research Symposium International Competition, Dallas, Texas on October 13-18, 2018

2. Winner, Florida state-wide research competition in poster category, FAMU and FSU 2018

► 67 graduate students from different universities in Florida state were participated in this competition

3. 3^rd place in 3MT Thesis Competition, FAMU 2018

4. 2^nd place in Florida state-wide research competition, USF 2017

5. 2^nd place in scientific research poster competition, FAMU 2017

6. Research Stipend ($500), Graduate Studies, FAMU 2016

7. Dean’s Scholarship, FSU (Fall, 2014)

8. Research Assistant, High-Performance Material Institute, FSU (Fall 2014 – Present)

9. Travel Grant Scholarship, Bangladesh-Sweden Trust Fund (BSTF), 2014-2015

10. Dean’s Awards, BUET (2008-2009)

11. Dhaka Education Board Scholarship for result in HSC Examination (2007-2011)