- M. Maalekian, A. Das, A. Kodentsov, M. Biglari, Brazing of tungsten to copper, Proceedings of THERMEC 2020, June 2020, Vienna, Austria (to be published).
- M. Maalekian, A. Das, A. Kodentsov, L. Krassenburg, M. Biglari, Brazing of aluminium alloys with higher magnesium content, Proceedings of International Congress on Aluminium Brazing, May 2020, Düsseldorf, Germany (to be published).
- M. Celikin, M. Maalekian, M. Pekguleryuza, Effect of Sb additions on the creep behavior of Bi containing SAC alloys, J. Electron. Mater., vol 48 (2019) 5562-69.
- M. Maalekian, A. Das, L. Krassenburg, N. van Veen, A. Kodentsov, M. Biglari, Development of low temperature Sn-Bi based solder alloys, Proceedings SMTA International, 2019, Rosemont, IL, USA.
- M. Maalekian, developing high reliability solders for harsh environment, Proceedings SMTA International, 2018, Rosemont, IL, USA.
- M. Celikin, M. Maalekian, M. Pekguleryuza, Effect of Bi additions on the creep behavior of SAC solder alloys, J. Electron. Mater., vol 47 (2018) 5842-49.
- M. Maalekian, K. Seelig, An update on high reliability lead-free solder alloys, Proceedings of APEX 2018, San Diego 2018.
- J. Del Rey, M. Matloobi, M. Maalekian, The Development of Novel Activators for Use in Halogen Free and Water Soluble Solder Pastes, Proceedings of ICEET, 2018, Toronto, Canada.
- M. Maalekian, K. Seelig, New Pb-free solder alloy for demanding applications, Proceedings of SMTA International Proceedings, 2017, Rosemont, IL, USA.
- M. Maalekian, K. Seelig, Low silver SAC-Bi lead-free solder for reliable applications, Proceedings of ICSR, 2017, Toronto, Canada.
- A.H. Nobari, M. Maalekian, K. Seelig, M. Pekguleryuz, Effect of Ag, Ni and Bi additions on solderability of lead-free solders, Journal of Electronic Materials, 46, 7 (2017) 4076–4084.
- A. Nobari, M. Maalekian , K. Seelig , M. Pekguleryuz ,Effect of Sb on wetting behavior of near eutectic Sn-Cu solder micro-alloyed with Ni and Ge, Soldering & Surface Mount Technology, 28 (2016) 93-100.
- M. Maalekian, H. Azizi, M. Militzer, Phase field modeling of microstructural banding in steel, Metallurgical and Materials Transactions, 47(2016) 608-622.
- M. Maalekian, Y. Xu, K. Seelig, smttoday February 2016, 52-56.
- Maalekian, M., Y. Xu, and K. Seelig. Effect of Bi Content on Properties of Low Silver SAC Solders, Proceedings of SMTA International, 2015. Rosemont, IL.
- M. Maalekian, A. Nobari, K. Seelig, M. Pekguleryuz, Comparing mechanical and soldering behavior of Castin, Babbitt and alternative lead-free alloys, Proceedings of ICSR, 2015, Toronto, Canada.
- M. Militzer, M. Maalekian, T. Garcin, W. Poole, Microstructure evolution model for the HAZ of girth welds in X80 linepipe steel, Proceedings of the International Seminar on Welding of High Strength Pipeline Steels, CBMM and TMS (2013) 261-279.
- M. Maalekian, R. Radis, M. Militzer , A. Moreau, W. Poole, In situ measurement and modeling of austenite grain growth in a Ti/Nb microalloyed steel, Acta Materialia 60 (2012) 1015-1026.
- M. Militzer, M. Maalekian, A. Moreau, Laser-ultrasonic austenite grain size measurements in low-carbon steels, Materials Science Forum, (2012) Vols. 715-716, 407-414.
- M. Maalekian (Invited Author), Solid-State Transformations in Weldments, Welding fundamentals and processes, T. Lienert, T. Siewert, S. Babu, and V. Acoff (eds.) ASM Handbook, Vol. 6A, 122-145 (2011).
- M. Maalekian, E. Kozeschnik, Modelling mechanical effects on promotion and retardation of martensitic transformation, Materials Science and Engineering A, 528 (2011) 1318-1325.
- W. Poole, M. Militzer, F. Fazeli, M. Maalekian, C. Penniston, D. Taylor, Microstructure evolution in the HAZ of girth welds in arctic pipeline steels, 8th International Pipeline Conference, Volume 2, (2010) 317-320.
- M. Maalekian, E. Kozeschnik, Modelling the effect of stress and plastic strain on martensitic transformation, Materials Science Forum, Vols. 638-642, (2010), 2634-2639.
- M. Maalekian, H.P. Brantner, H. Cerjak, N. Enzinger, Friction welding of non-circular bars, Schweiss-& Prȕftechnik, JOIN Sonderband, J. Wirnsperger, M. Leibl (Eds.), ARGE Kompetenznetzwerk fȕr Fȕgetechnik JOIN, Graz, December 2009, 38-41.
- M. Maalekian, Characterization and Optimization of orbital friction welding of high carbon steel bars, Welding in the World, 53 (2009) 5/6, R109-123.
- M. Maalekian, H. Cerjak, Thermal-phase transformation modelling and neural network analysis of friction welding of non-circular eutectoid steel components, Welding in the World, 53 (2009) 3/4, R44-51.
- M. Maalekian, H. Cerjak, Modelling the Orbital Friction Welding of Pearlitic Steel Bars, Trends in Welding Research, Proceedings of the 8th International Conference, S.A. David et al (editors), 736-741 (2009).
- M. Maalekian, E. Kozeschnik, A thermodynamic model for carbon trapping in lattice defects, CALPHAD, 32, (2008), 650-654.
- M. Maalekian, Thermal modelling of friction welding, ISIJ International, 10, (2008), 1429-1433.
- M. Maalekian, E. Kozeschnik, H.P. Brantner, H. Cerjak, Comparative Analysis of Heat Generation in Friction Welding of Steels Bars, Acta Materialia, 56 (2008) 2843-2855.
- M. Maalekian, E. Kozeschnik, H.P. Brantner, H. Cerjak, Finite element modelling of orbital friction welding of eutectoid steel bars, Metallurgical and Materials Transactions, 39A, (2008), 844-852.
- M. Maalekian, E. Kozeschnik, H.P. Brantner, H. Cerjak, On the influence of hot straining of austenite in solid-state welding of high carbon steel, Welding in the World, 52 (2008) 1/2, S100-106.
- M. Maalekian, E. Kozeschnik, H. Cerjak, Heat Generation in Friction Welding, Thermal Forming and Welding Distortion, F. Vollertsen, J. Sakkiettibutra (Eds.), Strahltechnik Vol. 31, BIAS Verlag, Bremen, 2008, 375-384.
- M. Maalekian, On the modelling of friction welding process, 10. Werkstofftagung: Verarbeitungs- und Gebrauchseigenschaften von Werkstoffen - Heute und Morgen, P. Mayr, R. Radis (Eds.), Verlag der Technischen Universität Graz, 2008, 99-102.
- M. Maalekian, Friction welding- critical assessment of literature, Science and Technology of Welding and Joining, 12 (8), (2007), 738-759.
- M. Maalekian E. Kozeschnik, S. Chatterjee, H.K.D.H. Bhadeshia, Mechanical Stabilisation of Eutectoid Steel, Materials Science and Technology (2007) vol.23, No. 5,610-612.
- M. Maalekian, M.L. Lendinez, E. Kozeschnik, H.P. Brantner, H. Cerjak, Effect of hot plastic deformation of austenite on the transformation characteristics of eutectoid carbon steel under fast heating and cooling conditions, Materials Science and Engineering A 454-455 (2007)446-452.
- M. Maalekian, M.L. Lendinez, E. Kozeschnik, H.P. Brantner, H. Cerjak, The Influence of Peak Temperature and Deformation on Welding CCT Diagram of Eutectoid Carbon Steel, Advanced Materials Research, Vols. 15-17 (2007) 1008-1013.
- M. Maalekian, E. Kozeschnik, H.P. Brantner, H. Cerjak, Inverse modelling and simulation of heat generation in friction welding, Mathematical modelling of weld phenomena 8, H. Cerjak, H.K.D.H. Bhadeshia, E. Kozeschnik (Eds.), Verlag der Technischen Universität Graz, (2007), 881-890.
- M. Maalekian, H.P. Brantner, Y. Ghanimi, H. Cerjak, Experimental & Numerical Studies on Orbital Friction Welding of High Carbon Steel, MS&T 2005; Sept.25-28 Pittsburgh, PA, USA, Symposium: Joining of Monolithic Structures and Components.
- M. Maalekian, G.H. Daneshi, Prediction of Bend Angle Distribution in Roll Forming of Channel Sections, Journal of Iranian Met. Eng . Society (in Persian), 14, Dec. (2002).
- M. Maalekian, G.H.Daneshi ,The Prediction of Deformation Length ,Roll Force and Total Plastic Work in Roll Forming Channel Sections, Journal of Iranian Met. Eng . Society (in Persian), No.2, (1999)
- M.Maalekian ,A. Jaafari ,A. Nabipour , A. Hosseini ,Preparation of solar absorber surfaces with excellent solar absorbtance and IR emittance,17th International Power System Conference,28-30 Oct. 2002,Tehran-Iran.(in Persian)
- M. Maalekian and G.H. Daneshi , Longitudinal and Shear Strain Deformation in Cold Roll Forming, Proceeding of the 1st Iranian Conference of Metals and Materials Deformation, Iran, May 8-10 ,2002.(in Persian)
- M. Maalekian, A. Jaafari ,A. Nabipour , A. Hosseini ,High performance selective surfaces from ferritic stainless steel AISI 430 for the photothermal conversion of solar, Proceeding of the 6th Annual Congress of Metallurgical Society of Iran,28-30 October 2002,Tehran-Iran. (in Persian)
- M. Maalekian, M. Mehizadeh ,Microstructure Damage Evaluation and Permanent Life Assessment of High Temperature Components and Welding Zone by means of Replica, Proceeding of the 4th Annual Congress of Metallurgical Society of Iran ,Oct. 2000, 1061-1071. (in Persian)
- M.Maalekian, Roll Forming Process Analysis, (review paper),Journal of materials and metallurgy ,Sharif Uni. of Tech. Publ., No.1, 2000. (in Persian)
- M. Maalekian, G.H. Daneshi, Determination of Deformation Length in Sheet Metal Roll Forming , Proceeding of the 3 rd Annual Congress of Metallurgical Society of Iran, October 18-20,1999, 329-335. (in Persian)
- M. Maalekian, G.H. Daneshi , Forming Severity and Strain Measurement in Roll Forming Channel Sections , Proceeding of the 1st Annual Congress of Metallurgical Society of Iran ,Oct. 20-22 ,1997, 225 –232. (in Persian)
- TMS2021, Electronic Packaging and Interconnections 2021, (Lead organizer of Symposium) to be held in March 14-18, 2021 | Orlando, Florida, USA.
- TMS 2020, Advanced Microelectronic Packaging, Emerging Interconnection Technology and Pb-free Solder, Feb 2020 San Diego, California, (Symposium co-organiser, Session Chair and Speaker)
- Advanced Engineering 2019, Automotive Engineering Forum, October 2019, Birmingham, UK (Speaker)
- Advanced Engineering 2019, Medical Device Engineering Forum, October 2019, Birmingham, UK (Speaker)
- 7th European Expert Wrokshop on Reliability of Electronics and Smart Systems, 2019 EuWoRel, October 2019, Berlin (Speaker)
- SMTA International, Sept 2019, Chicago, (Distinguished speaker)
- SMTA Europe, Electronics in Harsh Environments, April 2019 Amsterdam (Distiguished speaker)
- SMTA International, Sept 2018, Chicago, (Distinguished speaker)
- LED Assembly, Reliability & Testing Symposium, November 2017, Research Triangle Park, North Carolina (Speaker)
- SMTA International, Sept 2017, Chicago, Illinois (Distinguished speaker)
- iMAT2016, 5TH International Conference on Materials Engineering and Metallurgy, November 2016, Shiraz, Iran (Keynote Speaker)
- IPC APEX EXPO 2016, March 2016, Las Vegas, Nevada (Technical BUZZ Session, Invited Speaker)
- 12. Werkstofftagung , 50 Jahre IWS, December, 2015 (Invited Speaker)
- 2nd International Conference on Oil, Gas and Petrochemical, December 2014, Tehran, Iran (Keynote speaker)
- International Seminar of Numerical Analysis of Weldability, September 2009, Austria (Speaker and Session Chair)
- Annual Assembly of the International Institute of Welding (IIW), July 2008, Austria (Invited speaker)
- CALPHAD XXXVII, International Conference on Computer Coupling of Phase Diagrams and Thermochemistry, June 2008, Finland, (Speaker)