Tenor Headless 4pc Low Res

Note: Low resolution for mobile or slow browser

An example of 3D model generated with my Gugulele OpenSCAD script…

• • Decorative headless design

  • Single rectangular through-body spine

  • Double F holes

  • X-Bracing

  • Banjo style planetary tuners

  • Hole for 1/4” pickup

  • 4 pieces using M1.6 socket head screws

  • Back Cover for servicing

  • Length: 22.2" or 565mm, Width: 7.75" or 196mm, Thick: ~3.25" or 82.5mm when back and bridge are screwed on.

If you’ve successfully printed and assembled one, let me know :-)

Third Party Parts:

• • Spine/rods e.g. http://www.acpsales.com/.125-x-.325-Rectangular-Rod.html

  • Banjo Tuners e.g. http://www.amazon.com/dp/B018AWABJ4 or http://www.ebay.com/itm/361528177703

  • Screws (M1.6x8) for bridge e.g. http://www.amazon.com/dp/B00XP4ORF2

  • Screws (M1.6x12) for fretboard long holes e.g. http://www.amazon.com/dp/B00XP4OD5Q

  • Screws (M1.6x3) for back cover, and fretboard short (mid-line) holes e.g. http://www.amazon.com/dp/B00XP4PHUG

  • Transducer pickup with 1/4” jack e.g. http://www.amazon.com/dp/B002C741BI