Research Activities, Interests & Publication

Research Guidance

• 1. Supervision of Doctoral Research Eleven Nos (ongoing with two Registered at Delhi University).

•            Completed: Total - 10, (i) Dr. Noor Zaman Khan, (ii) Dr. Namrata Gangil (iii) Dr Sandeep Rathee, (iv) Dr Tina Chaudhary, (v) M Atif Wahid, (vi) Nidhi Sharma, (vii) Manoj K Yadav, (viii) Vivek Kumar Jain, (ix) Md. Zeya Ur Rehman, (x) Tanvir Majeed (x) Firasat Hussain

•            Undergoing: (i) Vishnu Tiwari, (ii) Ashish Sharma, (iii) Jitendra Yadav, (iv) Faiyaz Mir, (v) Tariq Ahmad

  1. Supervision of Master's Dissertation: Degree Awarded - 20, One going - 02.

  2. Guidance of Bachelor's Projects: Degree Awarded - 15, One going - 02.

Voluntary Research Assistance/Guidance to students

Editor

• 1. Associate editor to "Transactions on Intelligent Welding Manufacturing", a Springer Series. 

  2. Editor to PLOS|One, an SCI Journal

     1. Editor to International Journal of Engineering and Industries..

Books (in reverse chronological order)

• • 1. Engineering Economics and Cost Analysis, Publisher: Pearson Education, 2013  (ISBN: 978813179|4777).

    2. Engineering Economy, Publisher: Pearson Education, 2012 (ISBN: 9788131763872).

• 1. Engineering Drawing (with a primer on AutoCAD), 2004. Publisher: Prentice Hall of India (now, PHI Learning). 7th reprint in 2012. (Referred/Referenced Online By).

  2. Engineering Materials and Their Manufacturing.

     1. Fundamentals of Computers (covering-OS, MS Office, Networking and Programming in C++).

Monographs (in reverse chronological order)

1. Noor Zaman Khan, Arshad Noor Siddiquee, Zahid A. Khan, Friction Stir Welding: Dissimilar Aluminum Alloys, 2017. Publisher:  CRC Press, Taylor and Francis..

Articles Published in Journals (in reverse chronological order)

RECENT PUBLICATIONS AVAILABLE ON GOOGLE SCHOLAR AND RESEARCHGATE

2017

• 1. Reshma Yasmeen Siddiquie, Zahid A. Khan, Arshad Noor Siddiquee (2017) Prioritizing Decision Criteria of Flexible Manufacturing System using fuzzy TOPSYS. Journal of Manufacturing Technology Management, DOI: 10.1108/JMTM-04-2017-0069 (Emerald).

1. Namrata Gangil, Arshad Noor Siddiquee, Sachin Maheshwari, (2017) Aluminium Based In-Situ Composite Fabrication Through Friction Stir Processing: A Review. Journal of Alloys and Compounds, 715 (25):91-104 (Elsevier).

2. Sandeep Rathee, Sachin Maheshwari, Arshad Noor Siddiquee, Manu Srivastava, (2017) A review of recent Progress in Solid State Fabrication of Composites and Functionally Graded Systems via Friction Stir Processing. Critical reviews in Solid state and Material Science, DOI: 10.1080/10408436.2017.1358146 (Taylor and Francis).

3. Sandeep Rathee, Sachin Maheshwari, Arshad Noor Siddiquee, Manu Srivastava, (2017) Investigating effects of Groove Dimensions on Microstructure and Mechanical Properties of AA6063/SiC Surface Composites Produced by Friction Stir Processing. Transactions of Indian Institute of Metals, 70 (3): 809-816 (Springer).

4. Noor Zaman Khan,  Arshad Noor Siddiquee, Zahid A Khan, Ashim K. Mukhopadhyay, (2017) Mechanical and Microstructural behaviour of Friction Stir welded Similar and dissimilar Sheets of AA2219 and AA7475 Aluminium Alloys. Journal of Alloys and Compounds. 695(2017):2902-2908 (Elsevier).

5. Noor Zaman Khan, Zahid A Khan, Arshad Noor Siddiquee, Abdulrahman M Al- Ahmary, Mustufa H Abidi, (2017) Analysis of clean Fabrication Process of Friction Stir Welding. Transactiosn of Nonferrous Metals Society of China. DOI: 27(7):1507-1516 (Elsevier).

6. Sandeep Rathee, Sachin Maheshwari, Arshad Noor Siddiquee, (2017) Issues and Strategies in Composite Fabrication Via Friction Stir Processing: A Review. Materials and Manufacturing Processes. DOI: 10.1080/10426914.2017.1303162 (Taylor and Francis).

7. Sandeep Rathee, Sachin Maheshwari, Arshad Noor Siddiquee, Manu Srivastava, (2017) Distribution of Reinforcement Particles in Surface Composite Fabrication Via Friction Stir Processing: Suitable Strategy. Materials and Manufacturing Processes. DOI: 10.1080/10426914.2017.1303147 (Taylor and Francis).

8. Noor Zaman Khan, Arshad Noor Siddiquee, Zahid A. Khan, (2017) Investigations on the effect of tool pin profile on the joint quality of Friction Stir welded Aerospace grade Aluminum Alloy. Journal of Manufacturing Science and Production, DOI: 10.1515/jmsp-2016-0042: (DeGruyter).

2016

• 1. Sandeep Rathee, Sachin Maheshwari, Arshad Noor Siddiquee, Manu Srivastava (2016) Effect of tool plunge depth on reinforcement particles distribution in surface composite fabrication via friction stir processing. Defence Technology, DOI:10.1016/j.dt.2016.11.003: (Elsevier).

  2. Sandeep Rathee, Manu Srivastava, Sachin Maheshwari, Arshad Noor Siddiquee (2016) Effect of varying spatial orientations on build time requirements for FDM process: A case study. Defence Technology, DOI:10.1016/j.dt.2016.11.006: (Elsevier).

  3. Sandeep Rathee, Sachin Maheshwari, Arshad Noor Siddiquee, Manu Srivastava, SK Sharma (2016) Process parameter optimization for enhanced microhardness of AA 6061/SiC surface composites fabricated via Friction Stir Processing (FSP). Materials Today Proceedings, DOI: 10.1016/j.matpr.2016.11.089 : (Elsevier).

1. Sandeep Rathee, Sachin Maheshwari, Arshad Noor Siddiquee, Manu Srivastava, (2016) Effect of Plunge Depth on Reinforcement Particle Distribution in Surface Composite Fabrication via Friction Stir Processing. Defense Technology, DOI: 10.1016/j.dt.2016.11.003: 1-6(Elsevier).

   1. Brijpal Singh, Zahid Akhtar Khan, Arshad Noor Siddiquee, Sachin Maheshwari (2016) Optimal Design of Flux for Submerged Arc Weld Properties Based on RSM Coupled with GRA and PCA. International Journal of Manufacturing Technology and Management. InPress (InderScience).

   2. Mohd Atif Wahid, Arshad Noor Siddiquee, Zahid Akhtar Khan, Mohammad Asjad (2016) Friction Stir Welds of Al Alloy-Cu: An Investigation on Effect of Plunge Depth. Archive of Mechanical Engineering, 63(4): 619-634 (De Gruyter).

2. Suha K. Shihab, Zahid A. Khan, Arshad Noor Siddiquee (2016) Application of Grey Relational Analysis Along with Principal Component Analysis for Multi-Response Optimization of Hard Turning. International Journal Engineering Trends and Technology, 38(5): 238-245.

3. Noor Zaman Khan, Arshad Noor Siddiquee, Zahid A. Khan, Ashim K. Mukhopadhyay (2017) Mechanical and Microstructural Behavior of Friction Stir Welded Similar and Dissimilar Sheets of AA2219 and AA7475 Aluminium Alloys. Journal of Alloys and Compounds, 695: 2902-2908(Elsevier).

• 1. Sandeep Rathee, Sachin Maheshwari, Arshad Noor Siddiquee, M Srivastava, S.K. Sharma (2016) Process Parameters Optimization for Enhanced Micro-hardness of AA6061/SiC Surface Composites Fabricated via Friction Stir Processing (FSP). Materials Today: Proceedings, 3(10) Part B: 4151-4156(Elsevier).

  2. Brinjpal Singh, Zahid A. Khan, Arshad Noor Siddiquee, Sachin Maheshwari (2016) Effect of CaF2, FeMn and NiO additions on Impact Strength and Hardness in Submerged Arc Welding Using developed Agglomerated Fluxes. Journal of Alloys and Compounds (Elsevier) [doi 10.1016_j.jallcom.2016.01.133].

  3. Brinjpal SIngh, Zahid A. Khan, Arshad Noor Siddiquee, Sachin Maheshwari, Satish Kumar Shrama (2016) Effect of Flux Composition on the Percent Elongation and Tensile Strength of Weld In Submerged Arc Welding. Archive of Mechanical Engieering (DeGruyter, Germany), 63(3): 337-354 [doi- 0.1515/meceng-2016-0019].

2015

1. Zahid A. Khan, Shihab Karim Shihab, Arshad Noor Siddiquee (2015) Analysis of chip morphology in dry hard turning of AISI52100 Alloy steel using RSM. International Journal of Machining and Machinability of Materials. 17(6), 481–506

2. Shihab Karim Shihab, Zahid A. Khan, Arshad Noor Siddiquee, Noor Zaman Khan (2015) A novel approach to enhance performance of multilayer coated carbide insert in hard turning.  Archive of Mechanical Engineering  (De Gruyter, Germany) 638(4) 539-552..

3. Arshad Noor Siddiquee, Sunil Pandey, Noor Zaman Khan (2015) Friction Stir Welding of Austenitic Stainless Steel: A Study on Microstructure and Effect of Parameters on Tensile Strength Materials Today: Proceedings 2 (4-5), 1388–1397.

4. M Mohsin, Talib, A Khan, Zahid, M Geetha,  Arshad Noor Siddiquee (2015) Exploring the Effect of Thermo-mechanical Processing on Total Elongation of a Novel Biomedical Titanium Alloy International Journal of Materials Science and Engineering 3 (2), 120-133

• 1. Noor Zaman Khan, Zahid, A. Khan, Arshad Noor Siddiquee (2015) Effect of shoulder diameter to pin diameter (D/d) ratio on tensile strength of friction stir welded 6063 aluminium alloy. Materials Today: Proceedings 2 (2015), 1450-1457

  2. Mohsin Talib Mohammed, Zahid, A. Khan, M Geetha, Arshad Noor Siddiquee (2015) Influence of thermomechanical processing on biomechanical compatibility and electrochemical behavior of new near beta alloy, Ti-20.6Nb-13.6Zr-0.5V. International Journal of Nanomedicine 10 (2015), 223-235

• 1. Khan, Suha K. Shihab, Zahid A. Khan, Arshad Noor Siddiquee (2015) RSM based investigations on effects of cutting parameters on surface integrity during cryogenic hard turning of AISI 52100. Journal of Manufacturing Science and Production (De Gruyter, Germany), DOI: doi://10.1515/jmsp.2015-0009 (ISSN: 2191-0375).

1. Noor Zaman Khan, Arshad Noor Siddiquee, Zahid A. Khan, Suha K. Shihab (2015) Investigations on tunneling and kissing bond defects in FSW joints for dissimilar Aluminum alloys. Journal of Alloys and Compounds (Elsevier), DOI: doi://10.1016/j.jallcom.2015.06.246 (ISSN: 0250-4707).

2. Mohsin T. Mohammed, Zahid A. Khan, M Geetha, Arshad Noor Siddiquee (2015) Microstructure, mechanical properties and electrochemical behavior of a novel biomedical titanium alloy subjected to thermo-mechanical processing including aging. Journal of Alloys and Compounds (Elsevier) 634(2015): 272-280  (ISSN: 0250-4707).

3. Brijpal Singh, Zahid A. Khan, Arshad Noor Siddiquee, (2015) Effect of minor additives on bead geometry and shape relationship using Submerged Arc Welding fluxes. Journal of Manufacturing Science and Production (DeGruyter, Germany), 15(2): 183-196 (ISSN: 2191-0375).

4. Mohsin T. Mohammed, Zahid A. Khan, M Geetha, Arshad Noor Siddiquee (2015) Microstructure, mechanical properties and electrochemical behavior of a novel biomedical titanium alloy subjected to thermo-mechanical processing including aging. International Journal of Materials Science and Engineering (Elsevier) 3(2): 120-133 ( (ISSN: 2315-4527).

   1. Mohsin T. Mohammed, Zahid A. Khan, Geetha M, Arshad Noor Siddiquee, Prabash Mishra (2015) Influence of thermo-mechanical processing on microstructure, mechanical properties and corrosion behavior of new metastable Beta-Titanium biomedical alloys. Bulletin of Materials Science (springer), 38(1): 247-258 (ISSN: 250-47250).

2014

1. SK Shihab, ZA Khan, A Mohammad, Arshad Noor Siddiquee,  (2014) RSM  based study of Cutting Temperature during hard Turning with Multilayer Coated Carbide Insert.Procedia Materials Science (Elsevier) 6(2014):1233-1242.

2. T Mohammad, ZA Khan, A Mohammad, Arshad Noor Siddiquee,  (2014) Surface Modifications of Titanium Materials for developing Corrosion Behavior in Human Body Environment: A Review.Procedia Materials Science (Elsevier) 6(2014):1610-1618.

3. ZA Khan, Arshad Noor Siddiquee,  NZ Khan, U Khan, GA Quadir (2014) Multi response optimization of Wire electrical discharge machining process parameters using Taguchi based Grey Relational Analysis.Procedia Materials Science (Elsevier) 6(2014):1683-1695.

4. Arshad Noor Siddiquee, ZA Khan, ,  P Goel, M Kumar, G Agarwal, NZ Khan (2014) Optimization of Deep Drilling Process Parameters of AISI 321 Steel using Taguchi Method. Procedia Materials Science (Elsevier) 6(2014):1217-1225.

5. Noor Zaman Khan, Zahid A. Khan, Arshad Noor Siddiquee, Arindam Kumar Chanda (2014) Investigations on the effect of Wire EDM process parameters on surface integrity of HSLA: A multi-performance characteristics optimization. Production & Manufacturing Research (Taylor & Francis), 2(1): 501-518 (ISSN: 2169-3277).

6. S Lal, S. KUmar, Zahid A khan, Arshad Noor Siddiquee,  (2014) Optimization of Wire electric discharge machining process parameters on material removal rate  for Al7075/Sic/Al2O3 hybrid composite. Journal of Engineering Manufacture (Sage), DOI: 10.1177/0954405414533511.

7. Arshad Noor Siddiquee, Sunil Pandey (2014) Experimental Investigation on Deformation and Wear of WC tool during Friction Stir Welding (FSW) of Stainless Steel. International Journal of Advanced Manufacturing Technology (Springer), DOI 10.1007/s00170-014-5846-z.

8. S Lal, S. KUmar, Zahid A khan, Arshad Noor Siddiquee,  (2014) Multi-response optimization of Wire electric discharge machining process parameters for Al7075/Sic/Al2O3 hybrid composite using Taguchi based grey relational analysis. Journal of Engineering Manufacture (Sage), DOI: 10.1177/0954405414526382.

9. Suha Karim Shihab, Zahid A khan Aas Mohammad, Arshad Noor Siddiquee,  (2014) A review of Turning of Hard Steel used in Bearing and Automotive Applications. Production and Manufacturing Research (Taylor & Francis), 2(1):24-49.

10. Suha Karim Shihab, Zahid A khan Aas Mohammad, Arshad Noor Siddiquee,  (2014) Cryogenic Hard Turning of Alloy Steel with multilayer Hard Surface Coated (TiN/TiCN/Al2O3/TiN) Insert using RSM. International Journal of Current Engineering and Technology (INPressco International Press), DOI: http://dx.doi.org/10.14741/ijcet/spl.2.2014.48.

11. Suha Karim Shihab, Zahid A khan Aas Mohammad, Arshad Noor Siddiquee,  (2014) Investigations on Effects of CNC Dry Hard Turning Process Parameters on Surface Integrity: A Multi-Performance Characteristic Optimization. Journal of Manufacturing Science and Production (DE GRUYTER, Germany), DOI 10.1515/jmsp-2013-0019.

2013

1. Shahrul Kamaruddin, Zahid A. Khan, Arshad Noor Siddiquee, Yee-Sheng Wong (2013) The impact of variety of orders and different number of workers on production scheduling performance A simulation approach. Journal of Manufacturing Technology Management (Emerald), 24 (8): 1123-42.

2. V.K. Saini, Zahid A. Khan, Arshad Noor Siddiquee, (2013) Multi Response Optimization of process parameters in Electric Discharge Machining of High Strength Low Alloy Steel (HSLA). VIVECHAN: Internaional Journal of Research, 4 (2013): 78-90.

3. Arshad Noor Siddiquee (CorrespAuth), Zahid A. Khan, Jagat Tomar (2013) Investigation and optimization of machining parameters for Micro-countersinking of AISI 420 Stainless Steel. International Journal of Mechining and Machinability of Materials (IJMMM). (Publisher: Inderscience) (Accepted).

4. S Suha K, Zahid A. Khan, Aas Mohammad, Arshad Noor Siddiquee (2013) Application of Response Surface Methodology For determining Cutting Forces in Hard Turning using Castrol Coolant. Advanced MAterials & Characterization, 3(1): 27-36.

2012

1. Mohsen Talib, Zahid A. Khan, Arshad Noor Siddiquee (2012) Influence of Thermal and Thermo-mechanical Treatments on Mechanical Compatibility of Biomedical Titanium Alloys: A Review.International Review of Mechanical Engineering, 6(7) (Publisher: Praiseworthy Prize, Italy): ISSN (Print) 1970 - 8734.

2. Shahrul Kamaruddin, Zahid A. Khan,  Arshad Noor Siddiquee,  Wong Yee Sheng (2012) The impact of variety of orders and different number of workers on production scheduling performance: a simulation approach. Journal of Manufacturing Technology and Management (Publisher: Emerald). (Accepted).

3. Zahid A. Khan, Arshad Noor Siddiquee (CorrespAuth), Manzoor Hussain Sheikh (2012), Selection of optimal condition for finishing of centreless-cylindrical ground parts using grey relational and principal component analyses, Int. J. Maaterials and product technology(IJMPT), 43( 1/2/3/4) (Impact Factor/ Ranking), (Publisher: Inderscience) ISSN (Online): 0268-1900- ISSN (Print): 1741-5209.

4. Nitin Sharma, Shahzad Ahmad, Zahid A. Khan, Arshad Noor Siddiquee (2012) Optimization of Cutting Parameters for Surface Roughness in Turning. International Journal of Advanced Research in Engineering and Technology, 3(1), 86-96. (Publisher: Intl Assoc for Engg & Mgt) ISSN 0976-6499.

5. V.K. Saini, Zahid A. Khan, Arshad Noor Siddiquee (2012), Advancements in Non-Conventional Machining of Aluminum Metal Matrix Composite, International Journal of Engineering Research & Technology, 1(3), 1-24, (Publisher: Research India Publications) ISSN: 2278-0181

6. Arshad Noor Siddiquee (CorrespAuth), Zahid A. Khan, Shahrul Kamaruddin, (2012), Optimization of In-feed Centreless Cylindrical Grinding Process Parameters using Grey Relational Analysis, Partanika  Journal of Science & Technology , 20(2): 257-268. (Publisher: University Putra Malaysia Press) ISSN: 0128-7680.

2011

1. Pankul Goel, Zahid A Khan, Arshad Noor Siddiquee (CorrespAuth), Shahrul Kamaruddin, Rajeev Kumar Gupta (2011), Influence of Slab Milling  Process Parameters on Surface Integrity of HSLA: A Multi-performance Characteristics Optimization., International Journal of Advanced Manufacturing Technology (Publisher: Springer), Accepted. DOI: 10.1007/s00170-011-3763-y. (Impact Factor), ISSN: 0268-3768 (print) ISSN: 1433-3015 (electronic) . 

2. N.C. Fei, S. Karamuddin, Arshad Noor Siddiquee,  Zahid A. Khan (2011), Experimental Investigation on the Recycled HDPE and Optimization of Injection Moulding Process Parameters via Taguchi, International Journal of Mechanical and Materials Engineering (IJMME), 6 (1), pp 81-91 (Impact Factor) (Publisher: University of Malaya, Malaysia) ISSN: 18230334. 

3. Shahrul Karamuddin, Sok Yee Khoo, Zahid A. Khan, Arshad Noor Siddiquee, (2011), The Effect of Layout Design on Productivity: An Empirical Study, International Journal of Productivity and Quality Management (Publisher: Inderscience), 7 (4), pp 484-500. (Impact Factor) ISSN (Online): 1746-6482  -  ISSN (Print): 1746-6474.

4. Shahrul Karamuddin, Kok-Wui Boon, Zahid A. Khan, Arshad Noor Siddiquee, (2011), The Effect of Layout Design on Productivity: A Simulation evaluation, International Journal of Agile Systems and Management (Publisher: Inderscience), 4 (4), pp 342-363. , (Impact Factor) ISSN: 17466474, 17466482.

5. Mr. Ashish Karnwal, M. M. Hasan, Naveen Kumar, Arshad Noor Siddiquee, Zahid A. Khan,  (2011), Multi response Optimization of Diesel engine performance parameters using Thumba biodiesel blends by applying Taguchi method and grey relational analysis, International Journal of Automative Technology (Publisher: Springer), 12(4): 599-610, (Impact Factor) ISSN: 1229-9138 (print), ISSN: 1976-3832 (electronic) .

2010

1. Ashish Karnwal, Naveen Kumar, M M Hasan, Rajeev Chaudhary, Arshad Noor Siddiquee, Zahid A. Khan, (2010), Production of bio-deisel from Thumba oils: Optimization of process parameters,Iranica Journal of Energy and Environment, 1(4), 352-358 (Babool University of Technology) (ISSN 2079-2115).

2. Ashish Karnwal, Naveen Kumar, Mohd. Muzaffarul Hasan, Arshad Noor Siddiquee, Zahid A. Khan, (2010), Performance evaluation of a medium capacity deisel engine on thumba biodeisel and deisel blends, Journal of Biofuel, (Publisher: Indianjournals.com)1(2), ISSN: 1759-7269, Print ISSN: 17597269 1759 7269.

3. Ashish Karnwal, Naveen Kumar, Mohd. Muzaffarul Hasan, Zahid A. Khan, Arshad Noor Siddiquee,  (2010), Some experimental studies on utilization of Jatropha Curcus and Pongamia Pinata bio-diesel blends in an agriculture diesel engine, International Journal of Theoretical and Applied Mechanics,(Publisher: Springer), Volume 5, Issue 1 (2010), Pp 15-25 (ISSN 0973-6085).

4. Arshad Noor Siddiquee(CorrespAuth), Zahid A Khan, Z Mallick, (2010), Grey relational analysis coupled with principal component analysis for optimization design of the process parameters in in-feed centreless cylindrical grinding, International Journal of Advanced Manufacturing Technology (Publisher: Springer), Volume 46, Issue 9 (2010), Page 983 {(Citations to this Article)(total citation = 5)} (Impact Factor), ISSN: 0268-3768 (print) ISSN: 1433-3015 (electronic) . 

5. Zahid A Khan, S. Kamaruddin, Arshad Noor Siddiquee(CorrespAuth), (2010), Feasibility study of use of recycled High Density Polyethylene and multi response optimization of injection moulding parameters using combined grey relational and principal component analyses, Materials And Design (Publisher: Elsevier), 31(2010) 2925–2931 {(Citations to this Article)(Total citation = 6){, (Impact Factor) ISSN: 0261-3069.

2006-2009

1. Mallick, Zulquernain, Ahmed Hameed Kaleel, Arshad Noor Siddiquee, (2009) An expert system for predicting the effectc of noise, pollution on grass trimming task using fuzzy modeling, International Journal of Applied Environmental Science (Publisher: Research India Publications), 4(4), 389-403 (Print ISSN 0973-6077, Online ISSN 0974-0260).

2. Mallick, Zulquernain, Arshad Noor Siddiquee, Abid Haleem, (2008) Computing with Special Reference to Readability Tast under the Impact of Vibration, Colour Combination and Gender,Journal of Human Ergology (Publisher: Centre for Academic Publications, Japan), 37(2), 57-66 (ISSN 0300-8134).

3. Mallick, Zulquernain, Haleem Abid and Siddiquee Arshad Noor, (2008) Ergonomic Evaluation and Optimization of Levels of Temperature, Viewing Angle and Viewing Distance on Text Readability Task,Journal of Mechanical Engineering (Publisher: University Teknologi Mara, Malaysia), 5(1), 17-27 (ISSN: 1823 5514).

4. Mallick, Zulquernain, Irfan Anjum Badruddin, Haleem Abid, Siddiquee Arshad Noor and Khaleed H Tandur, (2007) Ergonomic Evaluation of Data Entry Task Performance Under The Influence of Noise and Task Structure - The Effect of Gender, International Journal of Mechanical and Materials Engineering (Publisher: University of Malaya, Malaysia, 2(2), 161-172 (ISSN 1823-0334).

5. Mallick, Zulquernain, M.M. Hassan, Zahid A. Khan and Arshad N. Siddiquee, (2006), Effect of Gender On Human Performance Under The Impact of Polluted Mobile Humen - Computer - Interaction Environment, Asean Journal on Science & Technology for Development, 23(1&2), 43-55 (ISSN: 0217-5460).

Reviewer to the following Journal

1. Materials And Design

2. International Journal of Advanced Manufacturing Technology

Associate Professor, Dept of Mech Engg, Faculty of Engineering & Technology Jamia Millia Islamia, New Delhi - India Phone : +9111-26981717 (Ext-2425). 

This Web Site Designed, Developed and Maintained by ARSHAD NOOR SIDDIQUEE