2. Gun Holsters


Every holster made to order
 
Each holster is hand made from a custom template for that specific pistol and wet molded for a close fit.

I specialize in traditionally made leather holsters for classic and vintage pistols.

Choose from the range of options below to customize your holster.

Any prices shown for pistols are for a standard model 
(regular weight leather, riveted fittings, single row stitching & front snap retention strap).

Since I make every holster to order I can easily accommodate all sorts of custom requests and design something new from scratch for you. 

LEFT OR RIGHT HAND?
         
    All holsters can be made for either Left or Right handed use.

LEATHER
 
All holsters are made from hand-dyed high quality veg-tan tooling leathers:

- Regular weight (2.5 mm / 5 to 6 oz.)

- Medium heavy (2.8 mm / 7 to 8 oz.)

- Heavier weight (3.0 mm + / 8 to 9 oz.)

See the Colour Options section on this page for available colours for the leather.

SEAM 

All seams are hand saddle-stitched with heavyweight linen thread and have burnished edges. 

See the Colour Options section on this page for available stitching colours.
 
    Single stitch row seam                                        Double stitch row seam - add £6 to £8 GBP to base cost.

    

Rivets can be added to seams for increased strength.



CARRY OPTIONS
 
OWB – (Outside waist band) - belt carry

Standard belt loop - fixed with double cap steel rivets hammered flush with the inner face of the leather (these won't scratch or mark the pistol).

  

Stitched belt loop - add £6 to £8 GBP to base cost of holster.
  

Belt loops can be set at an angle for cross draw.
 
IWB (Inside Waist Band)

IWB Loop(s) can be permanently fixed with rivets, stitched or fitted with press studs for easy removal of holster from belt.

       

Most models can be fitted with a front metal clip for IWB use - add £12 GBP to base cost of holster.
 
     
  

 
POCKET
       
Pocket carry versions can be made for most small and medium frame models. 

Can be left plain (not wet molded) to break up pistol outline in the pocket.

Can be made ‘rough side out’ to aid pocket retention and ease of draw.

     

 
COLOUR OPTIONS
 
Leather 

Holster leather can be dyed in any of the following colours:

Black 

Red (1 & 2)
Olive Drab (3)
Blue (4 & 5)
Green (6 & 7)
Yellow




Brown - 10 shades available - note colour darkens with leather cream applied:

No cream                                        With cream
 
Interior of holster can be dyed a different colour to exterior.                       
         
Stitching 
 

       White thread can also be dyed blue, green or the same shade as the leather.

RETENTION STRAP

Back strap snap
 
Back thumb snap - closing over back strap or hammer
         
Front strap

   

PRESS STUDS

S spring press studs

Ring spring (large & small) press studs
   

All press studs available in plain Steel, Gunmetal or Brassed finish