Log de arranque Livebox Inventel (DV4210) Firm 5.03.2-sp

Log de arranque de Livebox, conectando por el puerto serie

Cuadro de texto

96432SDRAM16bit_5GX101201234Hardware version 0x8A BLUE5G.6

56+678ESA: 00:16:ae:5a:02:b8

WEP KEY : F15C51EA3CC60ACFC3B9A533B8

Auto-negotiation timed-out

10 MB Half-Duplex (assumed)

Ethernet eth0: MAC address 00:16:ae:5a:02:b8

IP: 10.7.58.112, Default server: 0.0.0.0

Hardware version 0x0A BLUE5G.6 WITHOUT_OPTION

Factory Settings Recovery Switch OFF High

RedBoot(tm) bootstrap and debug environment [ROM]

Non-certified release, version release-wanadoo-fr - built 16:25:10, Jun 20 2006

Platform: Blue_5g (MIPS32 4Kc)

RAM: 0x80000000-0x81000000, [0x80445fb0-0x80fe2000] available

FLASH: 0xbe400000 - 0xbec00000, 128 blocks of 0x00010000 bytes each.

== Executing boot script in 0.200 seconds - enter ^C twice to abort

RedBoot> fis load -b 0x80010000 -m cramfs -f Image user_fs

Partition is : 0xbe430000 - 0x720000

mlen : 0x3c9038

begin_tag : 0xbe7f9000, end : 0xbe7f9038

Verif OK

Looking for Image in cramfs user_fs partition

cramfs_load : b 0x80010000, c 0xBE430000, s 0x00720000, f Image

.............loaded 0x1900FC bytes

Return with root_try==0

RedBoot> exec -c "boot_loader=RedBoot root=1F01 mem=16M" 0x80010000

root_try == 0 : leave boot cmd alone

Now booting linux kernel:

Base address 0x8000fc00 Entry 0x80010000

Cmdline : boot_loader=RedBoot root=1F01 mem=16M hwversion=BLUE5G.6-WITHOUT_OPTION redbootversion="release-wanadoo-fr-Jun 20 2006-16:25:10"

arcs_cmdline: boot_loader=RedBoot root=1F01 mem=16M hwversion=BLUE5G.6-WITHOUT_OPTION redbootversion="release-wanadoo-fr-Jun 20 2006-16:25:10"

Boot loader : REDBOOT

@ prom init

CPU revision is: 00029107

Primary instruction cache 16kb, linesize 16 bytes (2 ways)

Primary data cache 8kb, linesize 16 bytes (2 ways)

Linux version 2.4.17 (bfo@bfo) (gcc version 3.2.2) #1 Wed Sep 14 13:37:26 CEST 2005

Determined physical RAM map:

memory: 00fa0000 @ 00000000 (usable)

User-defined physical RAM map:

memory: 00fa0000 @ 00000000 (usable)

On node 0 totalpages: 4000

zone(0): 4000 pages.

zone(1): 0 pages.

zone(2): 0 pages.

Kernel command line: boot_loader=RedBoot root=1F01 mem=16M hwversion=BLUE5G.6-WITHOUT_OPTION redbootversion="release-wanadoo-fr-Jun 20 2006-16:25:10"

bcm_console_setup

Calibrating delay loop... 254.77 BogoMIPS

Memory: 13812k/16000k available (1429k kernel code, 2188k reserved, 96k data, 60k init, 0k highmem)

Dentry-cache hash table entries: 2048 (order: 2, 16384 bytes)

Inode-cache hash table entries: 1024 (order: 1, 8192 bytes)

Mount-cache hash table entries: 512 (order: 0, 4096 bytes)

Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)

Page-cache hash table entries: 4096 (order: 2, 16384 bytes)

Checking for 'wait' instruction... unavailable.

POSIX conformance testing by UNIFIX

mpi: No Card is in the PCMCIA slot

PCI: Fixing up bus 0

Linux NET4.0 for Linux 2.4

Based upon Swansea University Computer Society NET3.039

Initializing RT netlink socket

Starting kswapd

pty: 256 Unix98 ptys configured

brcmboard: brcm_board_init entry

New led 8, mask : 0x00000001

New led 0, mask : 0x00000002

New led 9, mask : 0x00000004

New led 6, mask : 0x00000008

New led 1, mask : 0x00000010

Module bcm63xx_cons.c v1.0

date: Sep 14 2005 time: 13:37:40 - FPERIPH:50000000

block: 64 slots per queue, batch=16

PPP generic driver version 2.4.1

DBW flash: probing 16-bit flash bus

Physically mapped flash: Probing for AMD compatible flash...

mfr_id 0x00000001, dev_id 0x0000227E, dev_id2 0x00002210, dev_id3 0x00002200

Found AMD AM29BDS643D

table[i] : mfr_id 0x00000001, dev_id 0x0000227E, dev_id2 0x00002202, dev_id3 0x00002200, long_dev_id 1

Found AMD AM29LV640MB

table[i] : mfr_id 0x00000001, dev_id 0x0000227E, dev_id2 0x00002210, dev_id3 0x00002200, long_dev_id 1

Found AMD AM29LV640MB

Physically mapped flash: Found 1 x 8MiB AMD AM29LV640MB at 0x0

mtd_info :

type 3, size 0x00800000, erasesize 0x00010000, name Physically mapped flash, index 0, numeraseregions 3

mtd_info->priv : amd_flash_private : device_type 2, interleave 1, numchips 1, chipshift 23<5> mymtd is : 80f52120

Support for extended flash memory size : 0x00800000 ; ONLY 64MBIT SUPPORT

RedBoot partition for 64MBit non aligned Flash

Using RedBoot partition definition

Creating 5 MTD partitions on "Physically mapped flash":

0x00000000-0x00030000 : "RedBoot"

0x00030000-0x00750000 : "user_fs"

0x00750000-0x007f0000 : "jffs_system"

0x007f0000-0x007ff000 : "FIS directory"

0x007ff000-0x00800000 : "RedBoot config"

usb.c: registered new driver usbdevfs

usb.c: registered new driver hub

NET4: Linux TCP/IP 1.0 for NET4.0

IP Protocols: ICMP, UDP, TCP, IGMP

IP: routing cache hash table of 512 buckets, 4Kbytes

TCP: Hash tables configured (established 512 bind 1024)

Linux IP multicast router 0.06 plus PIM-SM

NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.

Ebtables v2.0 registered<6>NET4: Ethernet Bridge 008 for NET4.0

VFS: Mounted root (cramfs filesystem) readonly.

Freeing unused kernel memory: 60k freed

init started: BusyBox v0.60.4 (2003) multi-call binary

Algorithmics/MIPS FPU Emulator v1.5

SYSINIT

INVENTEL version : v5.03.2-sp

Mounting proc filesystem ...

Mounting tmpfs filesystem ...

> NORMAL BOOT <

+ [ ! -e /etc/rc.d ]

+ /bin/rm -f /tmp/touch.test

+ /sbin/insmod prod_test.o

Using /lib/modules/prod_test.o

insmod: init_module: prod_test: Device or resource busy

+ [ 1 = 0 ]

+ [ mtd0 = mtd0 ]

+ cat /proc/mtd

+ grep jffs_system

+ sed -n s/\(mtd\)\(.*\):\(.\)*/\2/p

+ /bin/mount -t jffs2 -o rw /dev/mtdblock2 /mnt/jffs2/jffs2_3

+ /bin/rm -f /tmp/touch.test

+ /bin/touch /tmp/touch.test

+ [ ! -e /tmp/touch.test ]

+ /bin/rm -f /tmp/touch.test

+ [ -e /tmp/touch.test ]

+ [ ! -f /mnt/jffs2/jffs2_3/etc/issue ]

+ cat /mnt/jffs2/jffs2_3/etc/issue.bluedsl

+ grep version

+ x=INVENTEL version : v5.03.2-sp

+ echo x=INVENTEL version : v5.03.2-sp

x=INVENTEL version : v5.03.2-sp

+ cat /etc_ro_fs/issue.bluedsl

+ grep version

+ y=INVENTEL version : v5.03.2-sp

+ echo y=INVENTEL version : v5.03.2-sp

y=INVENTEL version : v5.03.2-sp

+ [ INVENTEL version : v5.03.2-sp = INVENTEL version : v5.03.2-sp ]

+ /bin/echo Up to date version ...

Up to date version ...

+ [ ! -f /mnt/jffs2/jffs2_3/etc/finished ]

+ exit 0

Mounting other filesystems ...

cp: /etc/crontab_root: No such file or directory

+ echo Switching to RUNLEVEL 1 ...

Switching to RUNLEVEL 1 ...

+ runlevel_manage 1

+ local previous

+ runlevel=1

+ [ -f /var/run/runlevel ]

+ previous=N

+ [ 1 = N ]

+ [ ! -f /etc/rc1.d/K* ]

+ continue

+ echo 1

+ echo 68

+ [ ! -f /etc/rc1.d/S05hardware ]

+ [ 1 != N ]

+ suffix=hardware

+ stop=/etc/rc1.d/K[0-9][0-9]hardware

+ previous_start=/etc/rcN.d/S[0-9][0-9]hardware

+ [ -f /etc/rcN.d/S[0-9][0-9]hardware ]

+ sh /etc/rc1.d/S05hardware start

Using /lib/modules/2.4.17/kernel/modulesrc/atmapi.o

atmapi: init_module entry 0xc00ad060 Sep 14 2005 13:40:08

Using /lib/modules/2.4.17/kernel/modulesrc/drivers/char/adsl/impl2/adsldd.o

adsl: adsl_init entry

Using /lib/modules/2.4.17/kernel/modulesrc/drivers/atm/impl1/blaa.o

blaadd: blaa_detect entry

Using /lib/modules/2.4.17/kernel/modulesrc/drivers/net/enet/impl2/bcm_enet.o

Resetting DSP and 2nd eth ..

GPIOio : 0xe9ffffc1

GPIOio : 0xe9fff181

bcm6348enet: bcmenet_module_init

bcm6348enet: bcm6348_net_probe

EnetInfo[1].ucPhyType = 3

EnetInfo[1].ucPhyAddress = 31

Broadcom BCM6348B0 Ethernet Network Device v0.1 Sep 14 2005 13:40:11 Internal PHY

bcm6348enet: bcm6348_init_dev

bcm6348enet: init_buffers

bcm6348enet: init_dma

bcm6348enet: init_emac

mii_AutoConfigure

BMCR : 0x3000

BMCR : 0x3100

mii_GetConfig

BCM6348_ENET: Auto-negotiation timed-out

BCM6348_ENET: 10 MB Half-Duplex (assumed)

eth0: MAC Address: 00:07:3A:FF:FF:FF

Broadcom BCM6348B0 Ethernet Network Device v0.1 Sep 14 2005 13:40:11 External PHY

bcm6348enet: bcm6348_init_dev

bcm6348enet: init_buffers

bcm6348enet: init_dma

bcm6348enet: init_emac

BMCR : 0x3000

BMCR : 0x3100

BCM6348_ENETMAC2 : AutoConfiguration Start

mii_AutoConfigure

BMCR : 0x3100

mii_GetConfig

BCM6348_ENET MAC2 : Auto-negotiation timed-out

BCM6348_ENET MAC2 : 10 MB Half-Duplex (assumed)

BCM6348_ENETMAC2 : Configuring for HALF-DPLX

eMiiConfig : 0x0000

eth1: MAC Address: 00:07:3A:FF:FF:FF

Using /lib/modules/2.4.17/kernel/modulesrc/drivers/net/usb/impl2/bcm_usb.o

USB MAC ADDRESS belongs to 00:16:AE:5A:02:BA

USB HOST MAC ADDRESS belongs to 00:16:AE:5A:02:BB

Broadcom BCM6348B0 USB Network Device v0.3

usb0: MAC Address: 00 16 AE 5A 02 BA

usb0: Host MAC Address: 00 16 AE 5A 02 BB

Using /lib/modules/2.4.17/kernel/modulesrc/drivers/net/wl/impl2/wl.o

PCI: Enabling device 00:01.0 (0004 -> 0006)

wl0: Broadcom BCM4318 802.11 Wireless Controller 3.91.7.0

insmod: no_console.o: no module by that name found

Using /lib/modules/switch.o

Switch module creating proc entry

Using /lib/modules/watchdog.o

Watchdog init Build: Sep 14 2005 13:42:42

Usage: ledctrl led_name led_state

Supported led names:

Adsl

Wireless

Voip

SelfTest

Lan

Led1

Led2

Led3

Led4

Led5

All

Supported led states:

Off

BlinkOnce

SlowBlinkContinues

FastBlinkContinues

+ [ ! -f /etc/rc1.d/S10adsl ]

+ [ 1 != N ]

+ suffix=adsl

+ stop=/etc/rc1.d/K[0-9][0-9]adsl

+ previous_start=/etc/rcN.d/S[0-9][0-9]adsl

+ [ -f /etc/rcN.d/S[0-9][0-9]adsl ]

+ sh /etc/rc1.d/S10adsl start

adsl start ...

+ [ ! -f /etc/rc1.d/S20backlight ]

+ [ 1 != N ]

+ suffix=backlight

+ stop=/etc/rc1.d/K[0-9][0-9]backlight

+ previous_start=/etc/rcN.d/S[0-9][0-9]backlight

+ [ -f /etc/rcN.d/S[0-9][0-9]backlight ]

+ sh /etc/rc1.d/S20backlight start

Update Backlight state

Off

Advanced

Device open failed: Address family not supported by protocol

+ [ ! -f /etc/rc1.d/S30network ]

+ [ 1 != N ]

+ suffix=network

+ stop=/etc/rc1.d/K[0-9][0-9]network

+ previous_start=/etc/rcN.d/S[0-9][0-9]network

+ [ -f /etc/rcN.d/S[0-9][0-9]network ]

+ sh /etc/rc1.d/S30network start

BcmAdsl_Initialize=0xC00BC418, g_pFnNotifyCallback=0xC00D0B90

kerSysGetSdramSize : 0x00FE0000

AdslCoreHwReset: AdslOemDataAddr = 0xA0FE504C

kerSysGetSdramSize : 0x00FE0000

Local network configuration ...

Ethernet network configuration ...

eth0: bcm6348_net_open

eth0: bcm_set_multicast_list: 00001003

eth1: bcm6348_net_open

eth1: bcm_set_multicast_list: 00001003

Hostname configuration : WANADOO-02B8

device usb0 entered promiscuous mode

eth0: bcm_set_multicast_list: 00001103

device eth0 entered promiscuous mode

eth1: bcm_set_multicast_list: 00001103

device eth1 entered promiscuous mode

br0: port 3(eth1) entering listening state

br0: port 2(eth0) entering listening state

br0: port 1(usb0) entering listening state

+ [ ! -f /etc/rc1.d/S40http_server ]

+ [ 1 != N ]

+ suffix=http_server

+ stop=/etc/rc1.d/K[0-9][0-9]http_server

+ previous_start=/etc/rcN.d/S[0-9][0-9]http_server

+ [ -f /etc/rcN.d/S[0-9][0-9]http_server ]

+ sh /etc/rc1.d/S40http_server start

Websrv start ...

+ [ ! -f /etc/rc1.d/S50wl_bcm ]

+ [ 1 != N ]

+ suffix=wl_bcm

+ stop=/etc/rc1.d/K[0-9][0-9]wl_bcm

+ previous_start=/etc/rcN.d/S[0-9][0-9]wl_bcm

br0: port 3(eth1) entering learning state

br0: port 2(eth0) entering learning state

br0: port 1(usb0) entering learning state

+ [ -f /etc/rcN.d/S[0-9][0-9]wl_bcm ]

+ sh /etc/rc1.d/S50wl_bcm start

br0: port 3(eth1) entering forwarding state

br0: topology change detected, propagating

br0: port 2(eth0) entering forwarding state

br0: topology change detected, propagating

br0: port 1(usb0) entering forwarding state

br0: topology change detected, propagating

nas_wksp_alloc_workspace: allocated NAS workspace 4476 bytes

nas_wksp_parse_cmd_line: nwksp.port 34954

nas_wksp_parse_cmd_line: nwksp.pid /var/run/nas.pid

nas_wksp_parse_cmd_line: nwksp.lan br0

nas_wksp_parse_cmd_line: nas[0].interface wl0

nas_wksp_parse_cmd_line: nas[0].hwaddr 00:16:ce:86:11:2d

nas_wksp_parse_cmd_line: nas[0].psk F15C51EA3CC60ACFC3B9A533B8

nas_wksp_parse_cmd_line: nas[0].mode 4

nas_wksp_parse_cmd_line: nas[0].ssid ee

nas_wksp_parse_cmd_line: nas[0].wsec 3

nas_wksp_parse_cmd_line: nas[0].wep.index 2

nas_wksp_parse_cmd_line: nas[0].wep F15C51EA3CC60ACFC3B9A533B8

nas_wksp_parse_cmd_line: unknown option -A, ignored

nas_wksp_parse_cmd_line: nas[0].gtk.rekey 0

nas_wksp_parse_cmd_line: nas[0].ssn.timeout 0

nas_wksp_parse_cmd_line: nas[0].disable_preauth 1

nas_wksp_open_wpa: br0: opened wpa socket 5

nas_wksp_open_wpa: br0: opened preauth socket 6

nas_wpa_open: wl0: opened wpa socket 7

nas_wksp_open_eapol: br0: opened eapol socket 8

nas_eapol_open: wl0: opened eapol socket 9

nas_wksp_open_host: host: opened loopback socket 10

nas_set_key: wl0: index 0, flags 0, len 0

nas_set_key: wl0: index 1, flags 0, len 0

nas_set_key: wl0: index 2, flags 0, len 0

nas_set_key: wl0: index 3, flags 0, len 0

nas_set_key: wl0: index 1, flags 2, len 13

nas_set_key: wl0: using 128 bit key algo

nas_wksp_dispatch_packet: br0: include wksp wpa socket 5 in fdset

nas_wksp_dispatch_packet: br0: include wksp eapol socket 8 in fdset

nas_wksp_dispatch_packet: br0 include wksp eapol preauth socket 6 in fdset

nas_wksp_dispatch_packet: host: include wksp host socket 10 in fdset

Setting SSID "ee"

device wl0 entered promiscuous mode

br0: port 4(wl0) entering listening state

+ [ ! -f /etc/rc1.d/S60dhcp_dns_server ]

+ [ 1 != N ]

+ suffix=dhcp_dns_server

+ stop=/etc/rc1.d/K[0-9][0-9]dhcp_dns_server

+ previous_start=/etc/rcN.d/S[0-9][0-9]dhcp_dns_server

+ [ -f /etc/rcN.d/S[0-9][0-9]dhcp_dns_server ]

+ sh /etc/rc1.d/S60dhcp_dns_server start

dnsmasq configured as dhcp server

dnsmasq start ( DNS / DHCP server ) ...

+ [ ! -f /etc/rc1.d/S60pair ]

+ [ 1 != N ]

br0: port 4(wl0) entering learning state

+ suffix=pair

+ stop=/etc/rc1.d/K[0-9][0-9]pair

+ previous_start=/etc/rcN.d/S[0-9][0-9]pair

+ [ -f /etc/rcN.d/S[0-9][0-9]pair ]

+ sh /etc/rc1.d/S60pair start

+ [ ! -f /etc/rc1.d/S60upnp ]

+ [ 1 != N ]

+ suffix=upnp

+ stop=/etc/rc1.d/K[0-9][0-9]upnp

+ previous_start=/etc/rcN.d/S[0-9][0-9]upnp

+ [ -f /etc/rcN.d/S[0-9][0-9]upnp ]

br0: port 4(wl0) entering forwarding state

br0: topology change detected, propagating

+ sh /etc/rc1.d/S60upnp start

Starting pairing manager

No ADSL, default: abc0

Update Backlight state

Off

Advanced

Upnp init ...

MyConfig in /etc/upnp.conf:

Debug=0

descDocName: gatedesc.xml

xmlPath: /etc/linuxigd

g_iptables: /usr/sbin/iptables

g_forwardChainName: upnp

g_preroutingChainName: upnp

g_upstreamBitrate: 0

g_downstreamBitrate: 0

TGU: IpAddress: 192.168.1.200

+ [ ! -f /etc/rc1.d/S80bluetooth ]

+ [ 1 != N ]

+ suffix=bluetooth

+ stop=/etc/rc1.d/K[0-9][0-9]bluetooth

+ previous_start=/etc/rcN.d/S[0-9][0-9]bluetooth

+ [ -f /etc/rcN.d/S[0-9][0-9]bluetooth ]

+ sh /etc/rc1.d/S80bluetooth start

Device open failed: Address family not supported by protocol

Function cleanup_link_keys

wifi_nb : 0

0 link keys removed

/sbin/wlctl mac none

/sbin/wlctl kickall

wl0: Operation not supported

var unrecognized name, type -h for help

/sbin/wlctl macmode 0

INFO : IGD root device successfully registered.

Using /lib/modules/2.4.17/kernel/drivers/usb/usb-ohci.o

PCI: Enabling device 00:09.0 (0000 -> 0002)

usb-ohci.c: USB OHCI at membase 0xc015bb00, IRQ 20

usb-ohci.c: usb-00:09.0, PCI device 14e4:6300

usb.c: new USB bus registered, assigned bus number 1

hub.c: USB hub found

hub.c: 2 ports detected

Status : 0

Using scsi_mod.o

SCSI subsystem driver Revision: 1.00

Using sd_mod.o

Using usb-storage.o

Initializing USB Mass Storage driver...

usb.c: registered new driver usb-storage

USB Mass Storage support registered.

Using nls.o

Using fat.o

Using vfat.o

INFO : Advertisements Sent. Listening for requests ...

mount: Mounting /dev/sda1 on /webs failed: No such device or address

telnetd: starting

port: 23; login program: /bin/sh

Using /lib/modules/bt_reset.o

Bluetooth configuration ...

killall: hcid: no process killed

killall: hciattach: no process killed

killall: sdpd: no process killed

killall: dund: no process killed

killall: pand: no process killed

Using /lib/modules/bluez/bluez.o

Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>

Using /lib/modules/bluez/l2cap.o

Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>

Using /lib/modules/bluez/rfcomm.o

BlueZ RFCOMM ver 1.1

Using /lib/modules/bluez/bnep.o

BlueZ BNEP ver 1.2

Written 2001,2002 by Clement Moreau <clement.moreau@inventel.fr>

Written 2001,2002 by David Libault <david.libault@inventel.fr>

Using /lib/modules/bluez/hci_uart.o

Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>

Using /lib/modules/bluez/sco.o

Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>

choix canal com et Verification du boot\n

rmmod: tty_spi: No such file or directory

Using /lib/modules/tty_spi.o

usage: insmod tty_spi spi_cs=N

CS=0 date: Sep 14 2005 time: 13:42:42, speed 1

hardware version returned by bootloader: 0x31303032

Using /lib/modules/tty_spi.o

usage: insmod tty_spi spi_cs=N

CS=0 date: Sep 14 2005 time: 13:42:42, speed 2

Mode: bcsp

Hardware version: 0x31303032 - Software version: 0x33313537

Bluetooth is OFF in this configuration. Disable scan and exit.

+ [ ! -f /etc/rc1.d/S99printkoff ]

+ [ 1 != N ]

+ suffix=printkoff

+ stop=/etc/rc1.d/K[0-9][0-9]printkoff

+ previous_start=/etc/rcN.d/S[0-9][0-9]printkoff

+ [ -f /etc/rcN.d/S[0-9][0-9]printkoff ]

+ sh /etc/rc1.d/S99printkoff start

Setting printk off

+ rm -f /var/run/rc.pid

Sysinit done

Please press Enter to activate this console.

WANADOO-02B8 login: root

BusyBox v0.60.4 (2003) Built-in shell (ash)

Enter 'help' for a list of built-in commands.

Page updated

Google Sites

Report abuse