Русский

עברית

==================================

[28/06/2025]  NEW!!! The site is updated with the description of PINTA v329[B2] device and videos

of experiments with the improved prototype. Scheme/description free downloads.

==================================

    [20/02/2024]  NEW!!! Article is updated with the final chapter 24.

[28/06/2025] Additional changes in part XIX.

==================================

-----------------------------------------------------------------------

Article for free downloading in DOC  format  is updated [28/06/2025] with v24 .

Article for free downloading in PDF format  is updated [28/06/2025] with v24 .

==============================================================================

To download this article for free as DOC file, click here.

===============================================================================

To download this article for free as PDF file, click here.

=====================================================================================================

Yuri Smolyansky

What is a man? Man is a set of

highly organized energy fields

in material body.

                  Asher Rav-Moded.

   If at first the idea is not absurd, it is hopeless.

                                                   Albert Einstein                                                      

Hartmann’s Lines.

Victory over the GPZ (Geo-Pathogen Zone).

Part I.

Introduction, general information on GPZ and Hartmann’s lines

    Anyone, who ever had the deal with planting the plant, knows that seed, been planted in the ground, behaves differently: one quickly grows and bears fruit, the other - dries up, left in the ground, and the third, barely went up, becomes sick. Even, if you plant a tree in a good soil and with proper care for it, but it will not guarantee that this tree will develop properly and will bring you healthy fruits. It is important to choose for this purpose the appropriate for this plant "healthy" place. Also, a person who states for a long time in a "bad" site is experiencing fatigue, or even illness. The first time I thought about all this was in 1989, when I faced with this phenomenon “live”. As a student, I lived for a month in the village Morohorovo in the Gomel region of Belarus, where our institute group helped in harvesting potatoes. The house owner showed me one apple tree, planted by him in the yard, which was affected by an "unknown disease". A hostess was sick with continuous and not passing headaches. In the yard was a well, probably under the house was underground water spring... to bind together these three facts, and to understand the common cause for them, I needed to carefully study the phenomenon of GeoPathogenic zones, for short - GPZ.

     So, we know that from pathogenic zones plants and people are sick. It has been known about these areas for a long time ago. In ancient times, it was determined as a "good" place for a bed, where in a new house a dog laid down on the floor. So, animals also "feel" good and bad places. Actually, people, also, can "see" such zones. In the old days they were determined by dowsers, holding a fresh wicker in their arm. Later came the dowsing in which with the aim to determine the GPZ, people also used a frame or a pendulum. In our time, scientists from Russia have created an electronic device IGA-1, by which GPZ may be defined, but more accessible and easier still remains to use dowsing techniques, one of which we’ll describe in this article.

    Natural fields of the Earth form geopathogenic zones (GPZ), which are local geophysical anomalies. The entire surface of the globe is covered with grids of electromagnetic lines with a width of about 10 cm and a cell pitch of 2.5x2 m - the Hartman network, 5x6 m-Curry network, 16x16 m, etc. These grids, overlapping each other, create a complex picture of geophysical anomalies on the Earth’s surface, and at the points of their intersection small foci of 10x10 cm in size are formed, where the radiation intensity increases sharply. Prolonged staying in which (work or sleeping places) contribute to poor health and the development of serious diseases such as cancer, sclerosis, arthritis. In geopathogenic zones, people can experience cardiac arrhythmia, blood pressure and body temperature change. Especially a lot of research in this area was carried out in Germany, Switzerland, Belgium, France, Austria. In 1976, in Germany, the fundamental book of E. Hartmann was published, called “DISEASE AS A PROBLEM OF LOCATION”, summarizing the long-term results of the author's work on the study of the influence of geopathogenic zones on human health.

    Inspection of apartments and workplaces at enterprises using the equipment developed in Ufa - the IGA-1 indicator - made it possible for the first time in world’s practice to reveal the relationship between the size of the geopathogenic grid and human health. It was determined that people living on grids with mesh sizes from 80 to 120 cm are more likely to have health problems and experience unexplained ailments. This can be explained by the greater likelihood of network crossings with smaller mesh sizes getting into the workplace or sleeper. In addition, the device allows you to determine geopathic spots with a size of 0.5 ... 2 m², which were not previously recorded and have not been studied. It turned out that a prolonged stay in these areas leads to a depressive state and hallucinations. Moreover, cases of cancer diseases of people living in apartments located under each other, as well as cases of suicide, were noted in places of intense earth radiation. The latter occurred against the background of prolonged depressive states, and a characteristic dependence was also noted on the fact that the beds of these people were in geopathogenic zones.

    Thus, geopathogenic effects pose a great danger to health and should be taken into account in our daily lives along with other environmental factors.

    Employees of the Center for Innovative Technologies "Equator" (Omsk) and The Department of Oncology of the OGMA, under the patronage of the Ministry of Health of the Omsk Region, on the basis of the Omsk Regional Oncology Center in 2006 conducted biomedical research to study the degree of influence of geomagnetic and technogenic radiation on the human body as an important cause of cancer pathology. The IGA-1 device was used for it.

Fig. 1-1. The influence of the Hartman and Curie network on cancer. The most dangerous are the places where the Hartman network node coincides with the Curie line.

       Buildings also "sick" from the zones. It is known that the buildings, which declared to be in the emergency state, suddenly collapsing buildings, buildings for destruction – are situating at large GPZ. It is either breaks or underground facilities such as subway, underground lakes, rivers, dry river bed, drained swamps, crossing the water flows, the crash site of the large size meteorites, ore deposits, deposits of radioactive elements, etc.

       GPZ-related faults - it is usually large areas of land with negative emissions. And if the house is on the fault, you will need to spend a lot of effort (and a lot of money) for protection. More often “bad” places associated with small negative areas which form a grid network. The most famous is so-called grid of Hartman. Networks, writes G. Kapitsa, are differently oriented, have a different width and intensity, and although their existence is undeniable, the nature of such networks, or arrows, is unknown. Unlike faults of extending wide stripes and stains, harmful zones of Hartmann grid considered intersection points of horizontal and vertical lines.

       Hartmann grid covers the entire surface of the planet by the lines with a width of 20 to 40 cm; the result is a rectangle 2 x 2.5 m (2 m from north to south and 2.5 meters from east to west). You understand that the mesh size 2 x 2.5 m can’t be avoided, by no apartment, no matter how small it is, from such a trapping network you can’t run and can’t hide.So, how can we define it? It is very simple.

  You can also make by yourself your frame or pendulum. To make a frame, you can take a copper wire about 20 cm long and 1.36-1.5 mm in diameter (approximate dimensions), clean the wire from the insulation and straighten it so that there are no bends. Bend it at a right angle (90degrees) about 7 cm from the edge (2: 1 ratio) and insert it into the case from a ballpoint pen, from which the writing unit was previously removed, with the smaller side of the bent wire inside. Our frame is ready. See photos below.

    As for my dowsing, I used the following construction of the pendulum: the old Soviet semiconductor diode КД202Д (suitable plummet weighting 6.0g, can be replaced by  any appropriate screw-nut) suspended on thread or rope through the eye for solder (thread of 55cm length) on the other hand is fixed on a conventional wooden match.

--------------

*Plummet’s weight may be 20-30g and is very individual from case to case.

**About of 80% of Earth’s population possesses the ability for Dowsing (bio-location). So, never mind that you couldn’t do it.

  (For better understanding, see photo 1)

photo 1.

    Take in your arm a frame or (preferably) a pendulum, orient towards north-south or east-west and slowly walk around the home, without changing direction. When you pass the peak point, the frame starts to deviate (a pendulum – fluctuates on Hartman lines and rotates in the node at the intersection of lines). If you notice such an activity, mark this place on the plane of the apartment, or just remember it. If the attempt is successful, then change the direction on the perpendicular to initial, and check again. Draw the resulting line also on the plan. The point of intersection will give you a lattice site. Now, draw the rest of the network that passes through your house.

     Keep in mind that walls, furniture and other things in the apartment, do not delay and do not reject the harmful radiation. Emissions from underground go vertically upwards, the height of your home from the ground, too, does not matter: GPZ equally strong both on the ground and on the top floor.

       Having identified the pathogenic zone with a frame, we should test it with the pendulum: the charge of a zone can be negative or positive. And in both cases - it is not good. Moreover, if the area comes with a "+" sign, it's even worse! In such areas the number of cancer patients is the highest recorded. Negative Zone is less harmful, but you are provided in it with headaches, constant colds and fatigue. On the positive node radiation, pendulum starts to rotate in a clockwise direction, and negative-node - anti-clockwise.

       If during the past few years, you were more likely to get sick, often uncomfortable, and the night dream fails to give a rest - it is also a signal. It is an alarming signal. It is necessary to carry out simple tests to find the source of the problem. Many here can show you pets and small children. If the dog does not lay in some places, to avoid them, it is a dangerous place. If there fish is dying, birds and hamsters are bald and sick - it's a bad place. If your child does not want to sleep there and in the dream is flipped across the bed - think. This is not “just”. This is also a signal. It needs to pay your attention.

       People have tried to neutralize the GPZ in many ways: by pyramids, mirrors, charged water, cactus, etc. But all these methods are either inconvenient or operate for a limited time with a fading effect. I bring to your attention my method of neutralizing the GPZ: by means of a permanent magnet of a certain polarity (more on this - below). And, of course, we’ll spice this article with a little bit of physics.

    If all you have a good health and you do not complain if you sleep a full sleep, the GPZ, you have, is everything all right. Or treat yourself to five percent minority, which is able to negotiate with the zone. And in the worst case - start systematic work with GPZ. It is something you can't take out of the apartment, you still can not remove, so proceed from the fact like that it is as impossible as to move the wall. Just do not use these areas to rest or sleep…

    For clarity, let’s sum up the first part in the table of GPZ and my “right-hand rule” for pathogen energy direction determination:

 -------------------------------------------------- --------------------------------------------------------------------------------

| (-) | Counterclockwise | ascending node   | energy comes from the earth |takes energy

 -------------------------------------------------- ---------------------------------------------------------------------------------

| (+) | Clockwise            | descending node | energy from space to ground |over-energizes

 -------------------------------------------------- --------------------------------------------------------------------------------

   “Right-hand Rule” for pathogen energy direction determination according to pendulum oscillation:

========

* NOTE: For those holding the pendulum with the LEFT hand, the pendulum will rotate in the opposite direction. Accordingly, change the hand for our rule to LEFT. The destination of the fingers (large for energy flow, the rest for rotation of the pendulum) will be the same.

Part II.

Theory and practice. (Author's hypothesis and experiments)

    As is known, according the manifestation of the properties of the magnetic field all structures are dividing onto:

- Ferromagnets (K> 1) [magnetic lines accumulate in them], for example: a simple magnet.

- Paramagnetic (K = 1) [magnetic lines pass through it, or does very poorly interacting with the structure] non-magnetic material, liquids, gases.

- Diamagnetics (K <1) [structure pushes out of itself the magnetic field] - superconductors.

    Let’s dwell on the last case. For the first time Superconductivity was observed during the discovery of the superfluidity of liquid helium at cryogenic temperatures. We are more interested in some ceramics electric superconductivity at very low temperatures, namely - levitation (a phenomenon hovering body while pulling out magnetic field).

    For the reasons of Synergy, I take the liberty to suggest (hypothesis) that the Hartmann lines have the same, superconducting structures, such as the crystal structure of superconductors. What flows through the channels (in areas at the intersection of the lines), I can not see with the naked eye . Maybe because it is flowing at a speed greater than the speed of light, and perhaps for other reasons (energy of unknown to modern science bearers), but somehow I'm sure it must be something like the flow of fermions in a superconductor structure (leave they look for the future generation of physicists )…

    But let us return to our sheep ... I think I was distracted. If the structure of the channel of the Geo-Pathogen Zone (GPZ) at the intersection of the lines of the grid Hartmann - a superconductor, then it should not tolerate such violence, as the magnetic field . Therefore, finding the GPZ by the above dowsing (biological location) boldly introduce into it a magnet. Voila! Your problematic GPZ is destructing almost instantly (the future physics can look at the same place the glow of Cherenkov-Vavilov, if we are dealing with a carrier of energy, that is really moving at a superluminal velocity). But we still do not see, and why we need it? We just need to get rid of the GPZ to sleep well.

    And thus (by introducing magnetic media into the zone), you can destroy (destructure) both top-down and bottom-up structure of the GPZ. That is, my method acts on the structure and not on the energy carrier.

        The results summary.

    1. What is a magnet suitable for the neutralization of the GPZ? For this purpose is suitable enough strong magnet (~1Tesla) of any shape, made of any material.

    2. How much time to keep the magnet in the zone? Experiments were carried out for durations of 2 hours , 1 hour, 30min, 15 minutes, 30 seconds. After the withdrawal of the magnet from the GPZ, I observed the same zone crystallization for all periods. It was not possible to make measurement less than 30 seconds, because exactly so much time was required the pendulum to stop after entering permanent magnet into a zone. 

        Therefore, I believe that it is enough ½ minutes (30 seconds).  

    3. For how long does one such exposure lasts? Zone should be up to 5 days to fully recover, judging by the results of my experiments.

(Different GPZ [both, negative and positive] crystallization curve after magnets withdrawal is shown on Figure 2)

  4. Well, if you leave the magnet in the area, and do not remove it, the problem will be solved in radical way, i.e. GPZ is not restored. (I did so, ‘cause it’s better, to my mind).

  5. Note, that the magnet as zone destructor is only effective in a vector way, that is, the area to meet with the magnetic field is maintained. Let me explain with an example.

     Example. We have a descending GPZ [+] when energy is directed from space to the ground (the pendulum rotates clockwise), and we want to neutralize it. When this magnet is put on the floor, in the center of the projection of the rotation of the pendulum, the oscillation (rotation of the pendulum in the dowser's hand ) STOPs.  It means, that this Geo-Pathogen Zone is NEUTRALIZED. 

  But it is only in the area of ​​the field and after meeting GPZ with magnetic field. On the lower floors, pendulum oscillations are not observed. But, if we’ll lift pendulum over a magnet by the height of about 1-1.5 meters, we obtain the rotation of the pendulum with the same radius, and thus, adverse effect on humans is of the same intensity. It should be remembered, and to neutralize the descending GPZ [+] choose to place the magnet into the highest point of the building (attic, roof), and for the ascending [-] - respectively, a lower (basement) – to STOP the GPZ interference after magnet.

 (For an explanation see Figure 3)

    Here, the Neutralizing Magnet’s POSITIONING is VERY IMPORTANT, because nothing changes if it is placed in a wrong manner – the Zone is not affected, and the situation may even become worse.

 So, for Descending [+] GPZ, the neutralizing Magnet must be placed with the Northern Pole (which turns in the Northern direction in a free positioning, or pulls to it the Compass’ Arrow, which turns to the South) DOWN-direction, towards to the neutralizing (protecting) space. (For best understanding see Figure 3.)

Other-hand, for Ascending [-] GPZ, the neutralizing Magnet must be placed with the Northern Pole UP-direction, also towards to the neutralizing (protecting) space. (For best understanding see Figure 3.)

    Here, the Neutralizing Magnet’s POSITIONING is VERY IMPORTANT, because if it is placed in a wrong manner – the Zone is reversed, and the situation may even become worse.

 For Your attention, enlarged picture of magnet see on Figure 3a.

 ( Figure 3a )

Displacement of Geographic and Magnetic Poles on Earth, see on Figure 3*.

                                                                                               (Figure 3*)

Part III.

Conclusions on experiments and further applications.

Findings:

1. GPZ (geo-pathogen zone) at the intersection of the Hartmann lines is a field structure of electromagnetic origin.

2. GPZ destructs after a meeting with the permanent magnetic field, i.e., interacts with it.

3. GPZ restored again in accordance with the crystallization curve shown in Figure 2 during up to 5 days at deducing from it the magnetic field.

Applications:

    Who knows, this article only slightly lifts the curtain over one of the mysteries of nature -  Hartman's lines and GPZ. First of all, it will help make our humanity healthier  and also opens horizons for further study, in which you may receive something from science fiction: the gravitational engine working on a new form of energy, and can implement teleportation, deep space communications or time machine. But, let me leave it all to a new generation of physicists… :-)

     In the light of my recent research and experiments carried out by me in 2017, I want to warn fans of wearing various magnetic jewelry, whose position in space relative to the GPZ is not always beneficial for the wearer.

    With extreme caution we must deal with magnetic bracelet having alternating polarity magnets. This bracelet may have a twofold effect on GPZ as reducing the energy flux of pathogenic and amplifying it, depending on the orientation in space.

    The general recommendation for wearing magnetic jewelry – to be outside the geo-pathogenic zones, which are observed at the intersection of the Hartmann lines.

    Magnets of different strengths, materials and configuration were tested. To neutralize the zone, I used a single usual ferrite magnet of the speaker of the TV ~ 1.05-1.2 Tesla

(see. Photo 2)

 Magnets for neutralization with marked polarity.

 Part IV.

The spatial model [GPZ-magnet]. The experiment for the enthusiasts.

12 February 2015, Thursday, 21:30

06 December 2015, Sunday, 21:00 [Updated]

   For the spatial interaction model of GPZ with the magnetic field of the permanent magnet (1 Tesla), we’ll conduct the following experiment.

    - Find the descending [for the convenience of the experiment] geo-pathogen zone GPZ(+) through dowsing.

    -Introduce into it our magnet (1 Tesla) for its destruction. (Please, observe the correct polarity). In the area of ​​the magnet (and after meeting with it) GPZ destructs, i.e. it is destroyed.

    -Remove [after 30sec] our magnet and study by our pendulum space over its former location, subjected to interactions [GPZ-magnet].

The scheme given below (see Figure 4)

    -As the starting point of reference we’ll take height above the magnet at which the oscillations occur with radius of 1cm. We’ll measure the diameter of the oscillation of the pendulum every 10cm, raising the pendulum over the former location of the magnet. From the obtained data we’ll build a chart (see. Figure 5)

Conclusions.

1) The diameter of the oscillation of the pendulum increases linearly with increasing of height. This can be seen from the graph, it is a straight line.

2) Extending the graph to the intersection with the axis OY, get the border, after which the oscillations are not observed. (H = 30 cm, d = 0 cm). 

3) Now, for clarity, we will show all this on the resulting figure describing the spatial model, resulting from our experiments. 

(Fig. 6) [see below] 

Plain language: the flow of geo-pathogen energy is STOPPED about 30cm before meeting with a magnet in its field, it does not pass through, and after - in the area of ​​my experiments (two floors + loft) - is not restored. It would be interesting to check on the high-rise building (7-9 floors) - but I have no such possibility, and who has - please check and be sure to write to the address at the end. Many thanks in advance!

BE HEALTHY!

===================================================================================================

(Fig. 6)

===========================================================================================

Part V.

19-October-2015, Monday, 20:30

Time model GPZ - Earth's magnetic field.

     On the Internet, some researchers describe experiments which study GPZ during geomagnetic storms, which resulted in the recorded "activity" of geo-pathogen zones at the intersection of grid of Hartmann lines. Zone as if "breathes", subtracting and adding the intensity, "fading" and "flaring". This fact can be explained just by my assumption in the light of the electromagnetic nature of the GPZ, as well as the spatial interaction model GPZ-magnet. According to the observations of scientists, Earth's magnetic field is not constant over time, and changes under the influence of solar activity, the so-called solar wind. In view of this facts changes the figure of  Kp - planetary magnetic index

(for details - see the SPACE WEATHER PREDICTION CENTER)

    The intensity of the flow of energy in the Geo-Pathogen Zone at the intersections of the Hartman lines grid, and specifically, the diameter of the GPZ (the diameter of rotation of the pendulum in hand of dowser), is directly proportional to the distance between the GPZ and magnet (static magnetic field). The smaller the magnetic field, the greater the intensity of the pathogenic field of GPZ. Conversely, the larger the field of a permanent magnet (the Earth), the less pathogenic field of GPZ. Earth's magnetic field "breathes" – also "breathes" the GPZ, in which they are located (see Part IV, Figure 5).

    When the intensity of the magnetic field of the Earth decreases, GPZ is restored and grows, "crystallizing" itself again (see Part II, Figure 2).

===================================================================================================

Part VI.

(According to the Internet)

Wildlife and geo-pathogen zones.

    In the literature there are many facts on the influence of geo-pathogen zones (GPZ) on flora and fauna.

-Roses, which grow in the garden, die in the GPZ.

-Poisonous plants (hemlock, autumn crocus, hulwort) grow best on GPZ.

-Houses built over the underground "water veins" at risk of destruction of wood fungi.

-Apple and cherry trees in the nodes of GPZ develop poorly. "Cancerous growths" appear on them.

-In places of GPZ humus in the soil at a depth twice as much as close to such places.

-Oak, nettles and ferns grow well especially in places of GPZ.

-In the places of GPZ don’t grow cucumbers, celery, tomatoes, peas.

-Solitary oaks grow mainly on the lines of the GPZ, or nodes, where they are better developing.

-Jay hides acorns mostly in the nodes of the GPZ. This is for finding it  in winter under the snow, in the area of ​​a circle with a diameter of not more than one meter.

-In the nodes of the GPZ are also found pine cones, extirpated by woodpecker.

-If after sunset swarm of flies or mosquitoes winds pillar on some place, there is underground water.

-Horse and dog in this place are digging the ground.

-Magpies build their nests on the GPZ units.

-Bees swarm in trees near the GPZ.

-Hymenoptera for the resettlement changes the selected components of the GPZ.

-Wild red ants build nests, taking into account the lines of GPZ. The main track to the anthill coincides with their direction.

-Storks build nests in the nodes of the GPZ. Lightning in the nest stork never strikes, although they are held high above the ground.

-Pets avoid the GPZ. Animals are hosts of GPZ and unable to move, driven into a corner.

-Cloven-hoofed mammals in knots of GPZ are ill. Cows milk yields are reduced, sick udder inflamed joints. The die-off begins in the cattle and animals die.

=+That at the nodes at the intersection of the lines Hartmann observed the greatest interference during a lightning storm.

= + [27/12/2020 + 28/09/2021] Sick cats are "healing themselves" in the GPZ.

My cat, who caught a cold after the Israeli winter rain, preferred a "home" place on a soft sofa to a place on the floor with a carpet, in which the GPZ (+) is located, which I had previously probed with the help of a pendulum and plotted on the plan of the house. Moreover, I want to note that some time before that, she, as usual, visited me in my home office and tried to "break through" to another strong GPP (+), located at the intersection of the lines of the Curie network of the 2nd order, about the neutralization of which I wrote in this article. But, coming closer, and realizing that the torsion field there was "frozen" with the help of hologram paper (see Part X), she lost any interest in it. 

===================================================================================================

Part VII. (added 28-02-2017)

    If you're bored without the GPZ in your life, which was neutralized all this time, then I got good news: geopathogenic zone is restored almost as instantly as disappeared if only to change the polarity of the magnet. That is enough to turn the magnet onto reverse side, and GPZ stream at the point of intersection of Hartman lines begins to flow again. Here comes the conclusion, that "jets" that flow in the GPZ are magnetic field structure and have a polarity. This brings us closer to unraveling the nature of Hartmann's lines and the GPZ as a single structural magnetic flux on the planetary level…

    And, now let’s have a little experience from the area of unscientific fantastic. We have a multi-storey building. On the top floor we’ll find and mark GPZ(+) that represents himself, in a new light, as the downward flow of some "magnetic jets." On the ground floor there is dowser beneath it with a pendulum or, in the near future, a kind of device, such as, for example, IGA-1, showing us the presence and absence of "geomagnetic jet" in geopathogenic zone. Inserting into a marked GPZ on the top floor the magnet of  certain polarity, the flow is stopped, and it is fixed by our dowser / device on the ground floor (a pendulum stops rotating). This is our "zero". Let’s overturn the magnet on the top floor, changing polarity, and restore the conductivity of the channel, thus providing "Jets" again to flow into it, and restoring the GPZ. The operator fixes the appearance of the rotation of the pendulum. This is our "one". Having accurate synchronized clock on every floor, we can at regular intervals to capture any absence in the flow of GPZ / pendulum rests / logic zero / no signal, or its availability / pendulum rotates / logic one / signal. Thus, we can already realize one of our old ideas, described above in a joking manner: far field communication, by alternating the polarity of the magnet in the GPZ. Although it is for someone undedicated can look either like telepathy* or as something completely supernatural. :-)

    Well, if you replace a magnet with solenoid, which is connected to the telegraph, it is necessary to talk about the patent on a new type of communication. However, to the invention of gravitational engine is so far, far away. Let’s leave its implementation to a new generation of physicists.  :-)

-------------------

* Thus it is possible to arrange a session of "telepathy", defining what pole (South or North) upwards (marked with a colored label) is our magnet in the GPZ (+).

 ===================================================================================================

(added 11-Dec-2017)

Part VIII. (GPZ, pendulum and the correct mirror location to neutralize the zone).

      Perhaps the explanation of the nature of the Earth's geo-pathogenic zones (GPZ) is rooted to the very beginning of the creation of the World, described in the first chapter of Genesis, taken from the Bible, the Old Testament. We will not delve further; just let’s take their torsion field nature to faith.

    We’ll leave the proofs of this axiom to the future generation of physicists. :-)

    We will check whether the mirrors affect on the GPZ and find out which side they should be located in order to neutralize the harmful effect of the zone. For this, it is absolutely necessary to find the GPZ and to determine its polarity, as described by me at the beginning of the article. It’s no matter, if we use a special electronic device (also mentioned at the beginning), or we produce a dowsing with a frame or a pendulum – both are correct. Further, in the direction of swinging of pendulum and the rule of the right hand (also described at the beginning of the article), we determine the direction of the flow of the GPZ. Let's say that we have a GPZ (-) going up from the Earth. Next, we’ll bring the mirror into it with the reflecting surface DOWN, towards the neutralized stream, and perform a check with a pendulum upper the mirror. Evrica! Oscillations are not observed - the pendulum is calm. The zone is neutralized. Let's check how soon it will recover after we’ll remove our mirror from it. By simple manipulations with stopwatch, we determine that the pendulum starts rotating in the GPZ literally IMMEDIATELY after the mirror is removed from it, and gains full strength and radius of rotation in a matter of minutes. Thus, it turns out that there is another mechanism for neutralizing and recovering (non-crystallization) of the GPZ. Note for clarity that if the mirror is flipped by the back side, no neutralization will occur, and the pendulum will dance above the mirror, as if nothing had happened. Everything described here is displayed in the illustration (Fig. 7) for greater clarity.

     Let’s investigate this mechanism in more detail. Now, let’s take the GPZ (+) to check what is happening with the reflected flow in the GPZ (+). We’ll arrange the mirror DOWN, and above it we’ll perform a pendulum check. Surprisingly, the pendulum changed the direction of rotation and rotates in the opposite direction with the same amplitude (radius). It otherwise means, that the geo-pathogenic energy flow is REFLECTED by our mirror. When the mirror is removed from the GPZ, the pendulum gradually slows down and starts to rotate as it was before the mirror placing into the GPZ - in the opposite direction. All this happens almost instantly, for a minute or two. (It is clear that the zone is instantly restored when the mirror is removed). That is to prove that the zone (+) behaves in relation to the mirror as well as the zone (-). Here I want to add that our experiments with a mirror prove (or rather indicate) the torsion nature of the field in the Hartmann lines, and in the existing geo-pathogen zones at their intersection.

    Again, as in the case of the magnetic neutralization of the geo-pathogen zones described by me in the first chapters of the article, it is IMPORTANT for us to correctly identify the zone and correctly install the reflecting mirror. So, for the GPZ (+), in which the pendulum rotates clockwise, the mirror needs to be placed UPPER from you, in attics, roofs and upper floors with its reflecting layer (in which are watching) UP. And, respectively, for the GPZ (-), in which the pendulum during the dowsing in the operator's hand rotates counterclockwise, as in Fig. 7 (a), the mirror for neutralization should be placed BELOW from you, on the lower floors, in basements, etc., with the reflecting mirror layer placed DOWN. After correct neutralization it is necessary to carry out a pendulum check again, and to make sure that it is calm (does not rotate) in the place of the former GPZ. (All this, I’ve described in detail and with illustrations in the first chapters of this article.)

================================================

 added 12-Dec-2017

Part IX. (A story with the magnetic neutralization of the geo-pathogenic zones at the intersection of the Hartmann lines in the sight of the Torsion Field Theory).

     In fact, the phenomenon of the existence of the Earth's geo-pathogenic zones and their neutralization with the introduction of a permanent magnet, subject to the polarity specified by me above, is much more complicated, and requires revision.

    In view of the inconsistencies in explaining from the point of view of classical Physics, the necessary revision of the article about the magnetic neutralization of Hartman lines in the light of the theory of the Torsion (information) Field has matured.

    So, let's try to explain the phenomenon of Hartman's lines and their magnetic screening using the Torsion Field theory. To do this, let us use its brief exposition, taken from the sources listed below, as well as our own intuition and erudition.

    First of all, we need to get acquainted with some phenomena of “Quantum Magic” briefly described on pp. 148-157 of Anatoly Pavlenko's book “Biosafety Electronics. A step beyond the horizon of official science.” [***]. I will briefly say that there is described the phenomenon of entangled quantum states, as a result of which a torsion field appears and disappears between the two halves, onto which a common annular magnet is divided. I believe that such a state of non-locality, or, in another interpretation, quantum entanglement, exists in the Hartmann lines. They unite THAT, which was a “single whole” during the creation of the World by Creator, described in the first chapter of the Bible in Genesis. In the Jewish TANAKH, this place is called “BeREISHIT”. But, let's not eat into letters and let's leave it for the future generation of physicists. :-)

    So, let's continue. I admit that the Hartman lines and, accordingly, geo-pathogenic zones arising at their intersection, have a Torsion nature. Constant magnets also have a Torsion (information) field in addition to the magnetic field. This hypothesis was first put forward by Davis and Rawls. They modified the traditional field model of the magnet by adding a torsion component. More details can be found on pages 160-162 of the above-mentioned book [***]. According to the modified model, the north pole of the magnet (N) shows the RIGHT spinning torsion field, and the south pole (S) - LEFT. For those who can not find or buy this book, let's try to depict our results in the illustration (Fig.8).

    We’ll add that this magneto-torsion model finds confirmation in my experiments on neutralizing the geo-pathogenic zones, proceeding from the fact that by means of dowsing and simple geometric constructions a conical structure (Fig. 5, 6) of the torsion fields at the poles of the magnet is determined. After dowsing over the poles of the magnet, I also saw that the pendulum is rotating clockwise over the north pole of the magnet (N), and counterclockwise over the south pole (S). And the very fact of the torsion field deflection in the zone (- / +) corresponding to the polarity of the magnet (is like the inclusion of a semiconductor diode in the reverse direction, breaking the electric circuit, where our magnet acts as a diode, and ALWAYS LEFT SPINNING pathogenic field acts as an electric circuit) that the phenomenon has a torsion nature.

================================================== ============================

23/01/2018

Part X. (One successful attempt to neutralize the Geo-Pathogen Zone [GPZ], the torsion component of computer radiation and the radiation of a cellular phone.)

         STAGE ONE (added 23/01/2018)

    As far away, as during the experiment with the reflection of the torsion field by the mirror, I found that my computer unpardonably  emits a pathogenic left torsion field that forms above the processor-fan area, and its vector is directed from the computer upwards (in detail, how to find it with a pendulum, described in the first chapter of this article). And, this is despite the fact that it is covered with a display-cover. What to do? Putting a magnet? - it's dangerous - you can demagnetize the hard disk and lose all the information ... Mirror? It also works by reflecting the torsion component and stopping the rotation of the pendulum, but it is very cumbersome and it can be accidentally broken up, God forbid! And it was also removed. The pendulum without protection, again revolves in a few minutes, like in a strong geo-pathogenic zone ... Statistics are horrifying: if people stay sick and die from a long stay in the GPZ, then what to do with the computer besides which we sit for hours at work and at home?

    And then I remembered the experiments on quantum teleportation ... described in the book in Russian by Anatoly Pavlenko "Biosafety electronics. A step beyond the horizon of official science. "[***] (pp. 87-104). In this book there is a chapter "Review of existing means of protection against the negative impact of mobile phones", which, among other things, describes the Swiss FOSTAC chip and the holographic resonator SPINOR, produced by Ukraine. At first, after thinking that I could buy something similar in a local store of mobile accessories, I went there, but after they wanted to "dissolve" me into some dubious protective liquid in a spray bottle, sprayed directly onto a mobile phone, I realized that, as usual, I "could not run away" from serious research ...

    First of all, when I got home, I decided to examine my new mobile Galaxy J5 with a pendulum. No reaction of the pendulum. Neither at a cellular call, nor at connection Wi-Fi through Skype. What is it? I started looking for a "protective chip", which, perhaps, was already implemented in my cell phone. And very soon found it on the back of the phone case. There I found an ordinary hologram sticker from the manufacturer of the case, which attests to the originality of its origin. I took off my case and checked my phone with a pendulum again. The pendulum "danced", as it was supposed to, and in my eyes I felt habitually "stabbed". Then I realized that the cause of stopping the pendulum was a conventional hologram sticker from the manufacturer, which "accidentally" turned out to be ON THE RIGHT PLACE, protecting me from the torsion component of electromagnetic radiation.

    Without going into the details of the production of holograms, I will only assume that such a protective effect is achieved through the use of a laser as a reference wave in the manufacturing of a hologram, that’s why is the cause of it’s "freezing" effect of the torsion field. The laser, projected onto the hologram product, acts as a narrow-band filter, without letting a broadband pathogenic torsion wave pass through ... But, let's leave something for the future generation of physicists for their work. :-)

    Further, I checked with my pendulum various types of hologram-containing objects shown in the photo, for the purpose of "freezing" the DIFFERENT (by definition) pathogenic radiations, namely, GPZ (geo-pathogenic zones), computer radiation (over the processor) and cell phone radiation (also containing a powerful processor). And I came to the conclusion that pathogenic radiation in all cases has the same TORSION nature, which can be detected by the method indicated in the first chapter of this article - the usual pendulum and my right hand rule - and neutralized by means of ordinary hologram products (pictured), setting them like a mirror or a magnet (described earlier).

    I am sure that you have plenty of such things that long ago you have wanted to throw into a garbage container, as annoying or unnecessary. Get them out of closets, lofts and sheds and use it for a new purpose ... For Your Health! And, with God’s help!

==============================================================

STAGE TWO (15-16-17/10/2019, published 26/10/2019); [© & Patent Pending :-)]

    So, apparently, it's time to start the second stage. To do this, you need to acquire a special treasured wrapping paper on which a hologram pattern is projected. Exactly like in the photo below; or, very similar to it.

:-) Voila! Now let's do a series of experiments with it.

Experiment No. 1. Neutralization of pathogenic torsion component of radiation of a cell phone.

    We shall check the torsion component of the radiation of the cell phone with a pendulum. To do this, place it directly above the screen. The pendulum begins to rotate counterclockwise. Using my rule of the right hand (see the beginning of the article), we determine the direction of the field. It goes up from the screen, and when we talk on the phone (correct!) into the ear and into the brain. But we do not want to get a carcinogenic disease, and close the cover of the case with the hologram paper during the conversation. Check with the pendulum on the other side, the one to the ear. The pendulum rotates for half a minute along a decaying trajectory and calms down. This suggests that our “protective chip” is working and the torsion field is “frozen”. When we open the cover to dial the subscriber, the pendulum comes into rotation again, but in the opposite direction - the field “unfreezes”. And, if we linger for more than half a minute, rotations resume with the same amplitude and in the primary direction. :-(

     To prevent this from happening, we’ll cut out our “protective chip” in the shape of the case and so as not to block the camera, and insert it into the back cover of the case. Do not worry about the direction of the torsion component: it "freezes" and thus, too. The main thing here - it is (not necessary precisely!) to place it in a torsion stream. For clarity, another photo is attached.

    Now, we’ll insert the phone into the case and use it for a long time, after checking with the pendulum that no oscillations occur during any operating conditions of the cell phone. We also remember that the neutralization of the pathogenic torsion field occurs in the called party, when calling from your device (the effect of quantum teleportation of protective properties). :-)

-------------------------------------------------- --------------------------------------------------

Experiment No. 2. Neutralization of computer pathogenic radiation.

    Here we act on the trodden path. For convenience, we simply wrap the computer with hologram paper, but so that the ventilation and the jacks of the devices do not close. It looks something like this for me.

-----------------------------------------------------------------------------------------------------

Experiment No. 3. Neutralization of pathogenic torsion component of the modem and Wi-Fi radiation.

    For a complete set, now we must neutralize the pathogenic torsion component of the modem and even the Wi-Fi spectrum radiation. Just put a cut out piece of hologram paper under the modem so that it does not interfere with the heat transfer and the periphery. Here - at your choice. Everything works the same as in previous experiments.

----------------------------------------------------------------------------------------------------

Experiment No. 4. Neutralization of Geo-Pathogen Zones (GPZ).

    This is the last thing. We know that being in the GPZ area for a long time disrupts sleep and affects health and well-being. This is our old enemy, which we had previously neutralized with mirrors and magnets. Let's check how things are now in a new light. Just as before, we find the Hartman lines and GPZ at their intersection. In the old fashioned way, we determine the direction of the pathogenic flow using my right-hand rule. We need this for the subsequent verification by the pendulum of the effectiveness of our new method. We cut out a square of 10x10 cm (approximate sizes), you can wide enough a strip of 10x4 cm from the same wrapping paper with a hologram pattern, and put it in the center of rotation of the pendulum in the GPZ. Moreover, it does not matter which side with respect to the pathogenic flow - our "trap" acts as a symmetric filter. And, another surprise: the pathogenic stream in the GPP column “freezes” in both directions: both up and down; and it doesn’t matter at all where the hologram trap is located - above or below the neutralized space. You can check all this yourself (with a frame, a pendulum or an electronic device IGA-1 or like) and make sure yourself that my method works.

    I think that in the future, this is the most acceptable and convenient method for neutralizing of Geo-Pathogen Zones and pathogenic torsion radiation from computers, modems, cell phones and the like equipment. :-)

---------------------------------------------------------------------------------------------------

Experiment No. 5. Neutralization of pathogenic microwave radiation.

    Today I looked at the "adverse" microwave oven. I placed a piece of hologram paper onto the casing from the outside of the magnetron and fixed it with a magnet. Full set. :-)

==============================================================

updated (29/05/2019)

          *** Some Genius and Heuristic CONCLUSIONS (for a new generation of physicists J ):

    1. Based on the Theory of Physical Vacuum, advanced by Academician Amosov, all the space inside us and around us contains of dual virtual particles - fitons. The phiton is born from a virtual photon that forms a pair of virtual particles - an electron-positron. Further, virtual particles move in one orbit simultaneously, with opposite spins rotating in antiphase in one orbit towards each other. This generates two magnetic moments, directed in parallel to one side. When they meet at the end of the trajectory, both virtual particles annihilate, forming a virtual photon. Vacuum is not a void, but consists of fitons that constantly undergo reincarnations of materialization-annihilation. In general, the vacuum is electrically neutral due to the spontaneity of these rebirths and their huge number and lack of organization. If conditions arise for vacuum polarization (longitudinal or transverse), then an electromagnetic wave may arise in it or, in the second case, a gravitational field.

    2. Without external (third-party) effects the phiton is neutral. It does not radiate or absorb. But with an external electromagnetic, gravitational, or other field effect on the fiton, the orbits of the electrons of which it consists, shift and a torsion field arises. All living and non-living physical objects have torsion fields, they interact with each other in space and outside it, sometimes slowing down or speeding up the flow of time processes. The whole Universe, the whole World consists of fitons. Radio signals in Cosmos vacuum are transmitted through fitons. Void does not exist. Everything in the World is connected and filled with phiton interactions or, in other words, torsion fields.

    3. By their physical action, Torsion fields are either Constructive (+) or Destructive (-). In the majority in our world Torsion fields are destructive (99%), but there are also constructive (1%). Destructive fields are harmful to humans, they cause illness and aging of the body, constructive, on the contrary, rejuvenate, causing a peculiar effect of slowing down time. Destructive fields rotate the pendulum in the dowser’s hand counterclockwise and are associated with the Left torsion field. Both torsion fields are vector. To determine the destructive field, I developed the rule of the right hand, described in detail at the beginning of this article. The Constructive Field is also vector, but it rotates the pendulum clockwise and is associated with the Right Torsion Field. The permanent magnet has both the Left Torsion Field (South Pole) and the Right (North) - described in detail and illustrated in Part IX of this article.

    4. All PATHOGENIC radiation is the LEFT (Destructive) Torsion field arising from various factors, being it Hartmann Networks or Curie, harmful radiation from computers and cell phones, natural fracture (crack, underground water) or artificial (tunnel, subway, water supply) , underground or above-ground DEFECTS OF A STRUCTURE, at the boundaries of separation of which there are displacements in the fitons, provoking the appearance of the Left (Destructive) Pathogenic torsion field, harmful to humans.

    5. The left torsion field (pathogenic) can be detected by dowsing or other methods (Chapter I) and neutralized as described in this article.

==============================================================

22/07/2018

Part XI. (Neutralization of Hartmann lines - instead of P.S.)

    So, as I promised a long time ago, I conducted the last series of experiments using my knowledge on dowsing, and here I publish their results.

    The Hartmann line disappears if the nodes on its sides are neutralized.  

    I want to clarify once again that the positive node of the GPZ (+) needs to be neutralized from above, above the protected space, and the negative node of the GPP (-) - below the level, respectively. After proper neutralization, both the nodes and Hartmann lines that were between them are disappearing.

-------------------------------------------------- --------------------------------------

    Now, let’s proceed to the neighboring nodes of Hartman. As it turned out, the Hartmann line disappears between two properly neutralized nodes, the pendulum is stable. The GPZ point, located on one straight line and between two neutralized nodes, is visibly weakened.

      What happens to the GPZ node (+, -) located at the intersection of two neutralized Hartmann lines? How do I know? Let's leave something for a new generation of Physicists !!! :-) And maybe we'll find out by ourselves?

 ================================================================

03/05/2020

Part XII.

Kurri lines and zones. Detection and neutralization.

    Kurri Grid, named for the Swiss physician Dr. Manfred Kurri, who opened it in the 50s, is located at angles of - 45 and +45 degrees to the coordinate grid, form a square network with a side of about 4 meters. The width of their lines is about 30cm. It is also an electrically charged line of natural origin. It is established that if you sleep at these intersection points, you can be susceptible to many organic diseases, including cancer.

For information. M. Curry Network (Curie) (D-Network)

    Diagonal. It is formed by parallel strips (walls), directed from south-east to north-west and perpendicular to this direction from north-east to south-west, diagonally crossing the rectangular Hartman grid. There are several orders of stripes of a diagonal grid. Every 14 parallel thin stripes of the first order, a few cm wide, is the 15th strip of the second order, about 30 cm wide. Subsequently, such an alternation continues, so after 14 second-order bands there is the 15th band of the third order, about 1 m wide, after 14 third order strips

a fourth-order band passes, about 3 m wide, etc. In this way, cells of the first-order strips are formed, with dimensions of 4-6 x 4-6 m; second - about 90 x 90 m, the third - 1250 x 1250 m, the fourth - 17500 x 17500 m, etc.

    At the intersection of the bands, Curry nodes or D-zones with sensible geopathogenic effect are situated. When evaluating the geopathogenic effect only those strips are taken into account, which starting from the second order, that is, of a width of 30 cm or more.

--------------------------------------------------------------------------------------------------------------------

Pictured: Rectangular Hartman grid and diagonal Curie grid.

----------------------------------------------------------------------------------------------------------------------

[21.12.2019] I discovered a zone of the Curie diagonal grid (in my home office after moving the furniture). The Curie zone is determined by the pendulum according to the rule of the right hand, described at the beginning of the article. I defined it as an (-) upstream. It is quite powerful, about second order, judging by the width of the strip 30cm and the diameter of the pendulum 20cm. So, I was obliged to act. I checked out that it is neutralized as well as the Hartman zone - by placing hologram paper in it or magnets of a certain polarity (described earlier). I decided to neutralize this D-Zone with hologram paper and to observe what was happening. 12 weeks have passed, that is 3 months.

 [25.03.2020] As it was noted earlier, Curie zones can be neutralized by methods applicable to the neutralization of the Geopathogenic Zones of the Hartman grid. But, in the light of the results of the last experiment in which the zone on Curie line was neutralized, it is NOT RECOMMENDED to do this, because the geopathic situation in the surrounding environment is getting WORTH after the neutralization. The pendulum rotates near the neutralized zone; cardiovascular failure appears after a long staying in this place. Based on these signs, I come to the conclusion that next to the neutralized, there is an induced, secondary zone, which represents an even greater danger. It is worth noting that when I was neutralizing the Hartman zones (GPZ), only positive effects were observed. Therefore, I removed the neutralizer from the Zone on Curie line, freed up space and continued to observe.

  [5.04.2020] After the “crystallization” of the zone, when the pendulum began to describe circles of the initial diameter over the GPZ, unexpectedly, I received “help” from my domestic cat Markitta, which was also interested in neutralizing the GPZ. J When I was working at a computer in my office, she ran to me at a trot, and layed down straight on Curie GPZ next to my desk. There she stayed for about 10minutes - half an hour. This did not escape from my attention, and after she left the “Curie knot” and went outside, I tested this place with a pendulum. You won’t believe it, but it stood calmly. So, in half an hour, the cat, effortlessly, with benefit for herself and harmless to others, neutralized the Curie zone, which I could not cope with for 12 weeks. J Of course, I double-checked everything, and every time the same was repeated: after the cat’s visit, the pendulum in the Curie knot calms down. Now I’ve got interested: how long does it take to completely neutralize and how quickly the Curie zone “crystallizes” after that. The resulting graph is depicted in the illustration below.

    It is worth noting that the Curie node recovered after neutralization 4 times faster than the Hartman nodes (36 hours via 5-6 days).

     But this is not scary, while my cat regularly visits me at my home office and “checks” the geo-pathogenic situation, neutralizing the ill-fated Curie node. But in subsequent visits, she lies already next to it, on the Curie line. Possibly, she knows better. :-)

====================================================================

[16/05/2020] After careful rechecking and drawing the lines and the Curie zone on the apartment plan, it turned out that the real Curie node is about 1 meter from the place of my previous activity, which I wrote about earlier in this article [25/03/2020]. I allowed the Currie knot to crystallize completely and reinstalled the hologram neutralizer into it. It was a week ago. I am currently observing reactions and behaviors, that generally have positive trends. It is clear that for definitive conclusions, it will take some more time to observe and filter such inadequacies as weather, seismic conditions, seasonal changes in the Earth's torsion fields (space factor), well-being and so on.

[23/05/2020] Recent dowsing tests indicate that Curie Zones are also successfully neutralized using two techniques that I found earlier. I use them to neutralize the GPZ at the intersection of the Hartman grid lines. These are: magnetic neutralization and freezing of the torsion field using hologram paper (described above in this article). So, the CORRECT neutralization of the second-order Curie zone will be considered the neutralization of the Curie node located at the intersection of TWO Curie lines of the same, second, order. In the place of their intersection, it is necessary to install a neutralizer, it is better to use hologram paper, due to its large size. Moreover, the installation of the neutralizer in another place, for example, at the intersection of the Curie line with the Hartmann line (where the rotational activity of the pendulum is also observed) is INCORRECT and WRONG. Such an incorrect installation leads to a displacement of the network lines and getting a WORTH geo-pathogen situation as a whole from that was observed earlier, until the error was eliminated.

    Therefore, be very careful to be exact!

-------------------------------------------------------------------------------------------------------------------------

=====================================================================

((Observations and studies are to be continued!!!))

======================================================================

===========================================================

[14-18-19/08/2020]

Part XIII..

Additional studies and experiments to neutralize the GPZ.

    To begin with, let's discuss "non-disposals".

    The first "non-disposal" are ordinary CDs (compact discs) and DVD-disks of various capacities, both single-layer and double-layer; both burned out and idle. All of them absolutely do not affect the flows of pathogenic energy, both ascending and descending - they do not reflect them and do not delay in any way.

    Further, the second "refusenik" is a tablet. Or maybe for accuracy, my AKAI tablet. Perhaps, it constructively contains a mirror (as one of the layers of the screen), which reflects all pathogenic radiation into the direction of the face while reading, but, on the other hand, the lower part does not emit a torsion component, so that you can “painlessly” put it on your knees.

    The third is the Blue Tooth radiation and all kinds of gadgets that use it to communicate and transfer information among themselves. This radiation is not blocked by hologram paper, as Wi-Fi radiation and other radiation containing harmful torsion components (such as microwaves) are blocked. I try to limit the use of Blue Tooth as much as possible until a means is found to neutralize it.

    Now, a few words about my latest experiments and observations.

    In order to fight against the corona-virus pandemic, we everywhere, in all public places, practice measuring of body temperature when entering the premises. The thermometer is an electronic non-contact, based on the effect of measuring the displacement of the wavelength directed at the body and reflected from it. In the beginning, our “experts” measured the temperature at the temple and forehead. So, they say, more precisely. Then they switched to measuring of hands. I, while possessing certain supersensitive abilities, all this time "was short-circuited" at each such measurement. What's the problem here? So I racked my brains until recently I found the reason.

    Having at my disposal a laser pointer (red laser 650nm), equipped with an additional blue LED lamp for checking the authenticity of bills (the dignity of a bill, applied with a special paint, becomes visible under illumination) and an ordinary home GPZ (-), I conducted several experiments with them.

    Experiment 1. Illumination of the ascending GPZ(-) with a 650nm red laser.

When the GPZ is illuminated with the light of a red laser, an increase in the radius of rotation of the pendulum is observed when it is simultaneously examined using dowsing. Conclusion: there is an increase in the flow of pathogenic energy.

    Experiment 2. Illumination of the same GPZ with a violet LED to check the authenticity of banknotes (pictured below).

When the GPZ is illuminated with a violet LED, the radius of rotation of the pendulum in the hand of the dowser decreases, up to a complete stop. Conclusion: there is a decrease of the torsion field flow.

    When the specific lighting is turned off, in both cases, there is a normalization to the parameters that were before both experiments.

     It should be noted that this stops both the left and right torsion fields. This corresponds to experiments with blue lamp illumination of a highly purified aluminum disc. The disc generates an alternating torsion field and stops generating when it is illuminated with a blue operating lamp (see Materials of the III International Scientific and Practical Conference "Torsion Fields and Information Interactions - 2012" http://www.second-physics.ru/node/29 (“ABOUT SOME PHENOMENA OF THE PHYSICAL NON-MATERIAL WORLD” (p. 143) Pavlenko A.R., Pavlenko A.A.)).

    Possibly, the generation of the biofield by the human body also stops when it is illuminated with such a violet light, which has been repeatedly recorded by me. But, this should not worry us especially, since the generation of the field by both man and disk resumes when such illumination is stopped. Whether it is harmful or not, decide for yourself.  :-)

    Experiment 3. Next, let's try the blue fabric as a GPZ neutralizer. And then a surprise awaits us: when the ascending GPZ (-) is covered with blue matter (I used a work volunteer T-shirt with the Intel logo 100% cotton), the rotation of the pendulum above it slows down and stops altogether. The same conclusion suggests itself: in this case, the flow of the left (pathogenic) torsion field stops.

    So, maybe this is due to the influence of my biofield on the GPZ (the shirt was in use before)? Let us check this in the next experiment.

    Experiment 4. For the next experiment, we use an inorganic, previously unused blue object. I took a plastic pad for office supplies (pictured). I placed it in the same ascending GPZ (-) and checked it with a pendulum from above: and again I’ve got a slowdown in rotation, followed by a complete stop.

    Experiment 5. Overlapping of the same GPZ (-) with red clothes or red cardboard/ plastics does not increase, but even decreases the flow of the left torsion field. Apparently, in the experiment with a red laser have meaning the coherent nature of the radiation.

======================================================

======================================================

[24.10.2020] Further, based on the last series of experiments conducted on 2/09/2020, a table of results is published. Overlapping of the Geo-Pathogen Zone with flat inorganic materials (to exclude the form factor) of various colors. White color does not diminish the influence of the GPZ (the pendulum rotates in the same way), black - almost completely neutralizes (the pendulum is calm). It is possible that this is a function of the external lighting of the GPZ.

   Material COLOR                         Overlap factor

           Black                                         100%

           Blue                                               100%

          Green                                      50% -70%

         Yellow                                     30% -40%

           Red                                       20% -30%

          White                                                0%

-----------------------------------------------------------------------------------------

[21.11.2020] This suggests an obvious conclusion: a simple, "stylish" blue LED backlighting of a working processor in a computer is a technically competent solution that "freezes" the torsion component of pathogenic radiation and significantly improves the ergonomics of the operator’s nearby. Let us also recall the catch phrase from the famous children's cartoon: "Dear parents! Take your children away from our blue screens!" If the screen glows blue, or it has a prevailing black background (night mode), it is obvious and experimentally confirmed by dowsing, that the torsion component of pathogenic electromagnetic radiation will also be "frozen".

   Let's go back to our "refusnik" (outlaw)... Remember? The BlueTooth speaker does not stop emitting pathogenic torsion radiation when its case is illuminated outside with a blue LED source, both during pairing and during broadcast. Our other "refusenik" - AKAI tablet - when switching from day light, screen theme to inverse night, with a dark background and white text, slows down and stops the rotation of the pendulum while checking with dowsing. You see, there is one less "refusenik". It is not excluded that in the case of BlueTooth, the torsion field will also freeze when the transmitting antenna is directly illuminated from the inside. But this is up to the manufacturers.

--------------------------------------------------------------------------------------------------------------------

Updated [28/10/2021]

The old tablet – “refusenik” AKAI was replaced by an improved tablet with a new screen technology (without a mirror layer), which fits perfectly into the framework of my hologram technology for freezing the pathogenic component of the torsion field. So, if you put a sheet of hologram paper under the working tablet (in the photo), then the rotation of the pendulum above its screen stops, and it becomes much more pleasant to work (at least for me), and also to our health. 

======================================================= 

EXPERIMENTS and OBSERVATIONS are to be CONTINUED!!!

======================================================= 

Part XIV.

FINAL RESULTS. [14/12/2020]

Let's briefly summarize and put things in order in the head.

1. People have long known "bad" places for living and for growing cultivated plants. These places feel different pets and define dowsers. You can also define them with a frame or a pendulum. They are also registered by specially designed for this purpose, electronic devices (IGA-1, VEGA, SEVA, etc.). If you stay in such a "bad" place for a long time, serious illnesses can develop.

2. In our case, we’ll use a pendulum. The pendulum over the geopathogenic zone is rotating according to my right-hand rule. If the dowser is left-handed and holds the pendulum in his left hand, then we change the instructions in the rule accordingly. This rule of pendulum’s rotating determines the direction of the pathogenic energy flow. You need to know this for correct neutralization later.

3. The surface of the Earth is covered with invisible energy grids with different orientations and cell sizes. We will take into account the Hartman and Curry networks. Networks conditionally consist of lines and zones at their intersection. On the lines of the grids, the pendulum swings along the line, and at the intersections it rotates. The larger the radius of rotation, the stronger the zone.

4. How to properly neutralize geopathogenic zones in an apartment? First, we define the Hartman grid and put it on the plan. By the rule of the right hand, we determine the direction of the energy flow when the pendulum is rotating. We mark it on the plan as well. It is only necessary to neutralize the GPZ, which interfere, that is, in those places where people are for a long time - beds and workplaces. We do not touch what does not interfere. Also, we do not touch the lines of the networks, but neutralize only the zones at their intersection. I also strongly recommend not to neutralize the pendulum-rotating zones at the intersections of different types of networks, for example, Hartman and Curry. Let me remind you that the size of the Hartman cell is 2.0 by 2.5 meters and pathogenic zones are located at the intersections of the network lines. You need to neutralize the zones at the tops of the cell. The line also weakens if it is between two neutralized (adjacent) zones. After that, we look for the Curry network. How to do it correctly is described in detail in Chapter 12 of this article. We are only interested in lines and zones of the 2nd order (or higher) with a line thickness of about 20 cm (or more). Let me remind you that improper neutralization can lead to even worse consequences, including cancer. On the other hand, a permanent staying in a GPZ for 3 to 7 years for most people leads to severe and irreversible consequences. Therefore, it is up to you to decide on the neutralization of the GPZ.

5. So, all the zones and lines of the Hartman and Curry networks have been found, plotted on the plan, and you decided to neutralize some of them. In this article, there are several ways that I have found and developed for this.

    Method 1. Magnetic neutralization. The polarity of the magnet in relation to the flow in the zone and the place of installation (above or below the apartment) are important. An incorrect installation aggravates the pathogenic situation in the neutralized zone.

    Method 2. Mirror reflection. As with method 1, it is important to correctly determine the direction of the pathogenic flow and, in accordance with this, correctly install the mirror. The pathogenic flow is absent behind a correctly installed mirror and changes direction (but does not disappear) in front of it.

    Method 3. Hologram freezing. Placing a hologram-containing object in the GPZ freezes the pathogenic flow in the "channel". Pole polarity or flow direction determination is not required. Freezing occurs in both directions. The most "cute" and "elegant" way. It can also be used to neutralize pathogenic streams from electronic equipment - computers, displays, tablets, cell phones, microwave ovens, modems, including Wi-Fi. In such cases, the teleportation of protective properties has been experimentally and instrumentally proved.

    Method 4. Partial and complete blocking of the flow as a function of external lighting.

-------------------------------------------------- ---------------------------------------------

I think the topic is not over.

Updates will be posted as needed.

I wish you all success and good health!

============================================================

==============================================================

(18/07/2021-8/08/2021-5/09/2021)

Part XV.

Computer Tomography and Neutralization

of its torsion pathogenic component.

To begin with, unexpectedly in January 2021, I had a complication of the curvature of the cervical vertebrae, earned over many years of employment at computers (often not at all in the most ergonomic conditions). It manifested itself in severe pain in the back and neck, suddenly "shooting" when getting up from a "lying" position and when going to bed, when putting on a shirt, when talking on the phone, when brewing tea, and in many other cases with the appearance of significant distortion in the cervical section of the spine.

In Israel, all visits to specialist doctors (and I needed an orthopedist) begin in the family doctor's office. The family doctor, having listened to me attentively, and having looked into the computer where the history of my illness was kept, sent me to a Computer Tomography, as there were prerequisites for this in the form of an X-ray picture with deviations recorded on it more than 5 years ago.

Pains in the neck and back bothered me greatly, and I, having phoned several hospitals in which this procedure was performed, ordered a queue in one of them in the shortest possible time, or rather, on February 23, 2021.

Knowing that during the CT procedure there is an intense irradiation of the organ of examination with powerful X-rays (the dose received is approximately 50 times that of the fluorography), and remembering the unpleasant consequences of a simple X-picture 5 years ago, I thought about how to protect myself, although would be from the torsion pathogenic component of CT (computed tomography), which must be present when a person is irradiated with a device during examination.

Having read earlier materials of scientific and practical conferences on information interactions held in various cities of Russia, since 2009, I was familiar with the effects of the appearance and termination of the generation of torsion fields of both polarities by a highly purified aluminum disk, in particular, the termination of generation when combining disk with its photograph, as well as when this disk is illuminated by the blue light of an operating lamp. In both cases, the torsion fields generated by the disk ceased (due to quantum entanglement). Eureka! Exactly what I need! During the examination, you had to have a photo ID with you. Fine! I added a piece of hologram paper from my arsenal of neutralizers, described in detail here. I put it under my photo ID. I put the certificate in my breast pocket so that during scanning it would fall into the scattering stream of radiation from the CT machine. I also took a picture with my smartphone against the background of the CT machine. This is just to be on the safe side in case my holographic "neutralizer" doesn't work.

Before the very check, I asked the staff if my "neutralizer" would interfere with the examination, and received permission to conduct an "experiment". Upon completion, I was assured that the picture came out "photogenic". After a while, having received the burned disc with the test results in my hands, I went home.

At home, I began to "observe" myself to see if I would have any consequences from the received dose of X-ray radiation. To determine the approximate value of the dose, I used the following numbers. The fluorography dose is 370 mBer. Multiply by 50. We get 18.5 Ber. This is what came from the apparatus. Weighting coefficient Ke = 0.12 for bone marrow and lungs. Multiply by it again. We have an effective equivalent dose for the whole organism equal to 2.2 Ber. This is approximately the dose of permissible exposure of personnel for six months. Not too scary. It is also far away till 10 Ber (one-time permissible emergency exposure of the population). Blood tests taken 2 weeks later were completely normal, as expected at such low doses. The only deviation from the norm was a slight disturbance in the phases of sleep (I noticed that my night dreams were not remembered as usual), due to which I did not fully get enough sleep, but this completely disappeared after 14 weeks (when the effect from the initial radiation was less than 10%). This is despite the fact that a part of the body was scanned from the crown of the head and almost to the heart. Also, I did not observe in myself a typical increase in appetite, apparently caused by damage to the energy membranes of the body (aura) and the need to restore them after irradiation.

Conclusion: the pathogenic component of the torsion radiation of the apparatus during the examination with Computer Tomography can be easily neutralized by the methods described above, and I can say that I succeeded.

===================================================================================================================

=============================================================

27/12/2020 - 3/11/2021

Part XVI.

Focusing and inverting the energy flow in the GPZ pillars by the crystal.

  In our time, various crystal products have become an integral part of the interior of city apartments. In our apartments you can often see chandeliers, vases and various serving items - glasses, wine glasses, decanters, candy bowls, etc. from this alloy of glass with lead (26% PbO).

We use some objects by rearranging them and returning them to their place. Others, such as chandeliers, are constantly staying in one place.

  A year ago, I began to conduct experiments with crystal and GPZ. It all started when one of our neighbors decided to move to another apartment, throwing a luxurious crystal chandelier onto the street. My mother borrowed crystal balls from there, which originally served as pendants for decoration (pictured below). After a while, I came up with the idea to place a crystal ball in the place with the GPZ and to study the behavior of the energy flow in this place with the help of a pendulum and dowsing.

What was discovered? What is the behavior of a pendulum in a GPZ of various orientations before, during and after the presence of crystal in it? Let's choose one GPZ(+) and one GPZ(-) and add a crystal ball to them for a short time up to several minutes. Of course, both zones were active before. After entering the crystal into the zone, the pendulum quickly slows down and begins to rotate in the opposite direction with a radius of about 1/10 (10%) of the initial activity. While the crystal is in the GPZ, the rotation in the opposite direction is maintained. The nature of this reverse rotation remains a mystery to me. So this is one of two things: either the direction of the flow changes to the opposite, or, more interestingly, the energy of the flow becomes positive. Is it possible? After removing the crystal object from the GPZ, the pendulum rotates in the opposite direction with a radius of about 90% of the original (before the experiment). I will try to represent everything that happens graphically. The following points are observed in the illustration below:

  (0) is the initial reference point before the experiment, when the pendulum constantly rotates in the usual direction,

  (1) - the point of introduction of the crystal into the GPZ,

  (2) - the point of residence of the crystal in the GPZ,

 <3> - measurement diagram 10 minutes after the crystal was taken out of the GPZ,

 <4> - measurement diagram after 1 day (24 hours) ---- "----,

 <5> - measurement diagram after 2 days (48 hours) ---- "----,

 <6> - measurement diagram after 3 days (72 hours) ---- "----,

 <7> - measurement diagram after 4 days (96 hours) ---- "----.

Each subsequent diagram schematically shows one complete cycle of rotation of the pendulum from stopping: the rotation is cyclic, starts from a state of rest, with an increasing amplitude, reaches a maximum, and fades to zero, then the rotation continues in the opposite direction from the usual (the sign "-" indicates on rotation in the opposite direction), increases, reaches its maximum, and, conversely, fades to zero. After that, the cycle is repeated. The oscillation period also changes over time. For accuracy, see the table below.

So, I watched both GPZs for three weeks, checking the rotation of the pendulum in both directions in a day or two, until I discovered that after the above time period, everything returned to normal: the amplitude and direction of rotation of the pendulum, both here and there, returned to the original parameters.

But, if we really want to do this immediately, then we will simply illuminate the place of the GPZ with the light of the blue spectrum, like it gives us a flashlight for checking the authenticity of banknotes or an old blue lamp that our grandmothers and great-grandmothers used for paramedical purposes in the last century.

During the observation, I noticed the synchronization of the cycles of rotation of the pendulum in all neighboring GPZs, in which there were previously crystal balls. And also reverse rotation in neighboring geo-pathogen zones, which were not affected at all. This suggests that neighboring geo-pathogen zones form groups in which the impact on one geo-pathogen zone of the group is enough for it to spread to the rest. Previously neutralized GPZs, whether by magnetic neutralization or by hologram freezing, showed no activity during my three-week observation. The pendulum in them remained motionless all this time.

In parallel with observing the behavior of the GPZ in the first few days, I monitored the geomagnetic situation using data from the NOAA USA website. A summary schedule is provided below.

    Comparing the dates in the table and the summary chart, you can find out that the two-way rotation of the pendulum did not stop until the magnetic storm. You can also see in the table that the total "swing" of the radiuses in these 3 days before the geomagnetic storm is 100%, and after that the rotation returns to the usual positive phase.

CONCLUSIONS: Use crystal household items. Where they are (under and above them) is a safe place from the point of view of a geo-pathogenic situation. And the positive effect partially persists after moving them. If there is a crystal chandelier hanging above your desk in your office, or you sleep in its projection onto the bed - it is good, even if it is on the floor below, with a neighbor. Crystal goods and crystal objects neutralize pathogenic radiation, and this fact should please their manufacturers in Bohemia.:-)

=============================================================

TO BE CONTINUED...

=============================================================

             Part XVII.

          Crystal and CRT.

And now, the promised continuation.

From the "malicious" "refuseniks" - devices, with which I fought for many decades, there was a CRT display of a household TV and a personal computer (Cathode-Ray Tube). These are very old "members of the orchestra", but I think that they still deserve attention, since the harm from them, which their users sometimes do not even know about, is really great.

What are the symptoms? When using a CRT as a computer display and a TV screen, the following symptoms can be observed: thirst, increased water intake, stinging and pain in the eyes, headaches, sleep disturbances, insomnia, disturbed blood supply to the arms and legs, metabolic disorders, slow metabolism, exacerbations of chronic diseases, mental decline, cognitive impairment, etc. This list is far from complete, and it can go on and on. These violations manifest themselves very individually, and are rarely associated with their real cause.

Studies using the Russian IGA-1 device revealed strong left (pathogenic) torsion fields emanating from CRT devices during their use, and established their counteractions and negative effects on the cells of the human body entering these fields, which, on the contrary, have right torsion fields.

Here I consider it is appropriate to cite an excerpt from the book by Anatoly Pavlenko "Biosecure electronics. A step beyond the horizon of official science." (pp. 61-62):

"Apparently, in the presence of an external left TF (Torsion Field) of the monitor, torsion DES (double electric layer) appear in the user's brain - structures that repeat the spatial-frequency structure of the influencing external TF. These new torsion structures - the result of the interaction of the individual TF of the user and TF of the monitor - are reflected as control signals for certain physiological functions, which leads to known disorders in the body .In some users, the interaction of the above-mentioned TF, along with disorders in the body, can be expressed in unmotivated and unpredictable behavioral reactions, the mechanisms of which can legitimately be considered as hidden foci of excitation that are formed at the subconscious level...

In addition, it is possible that some psychogenic (psychotropic) effect on the PC user is possible. It is expressed in the inhibition of reactions, in the appearance of a feeling of insecurity, fear, cheerfulness, anger, etc.

Thus, under the influence of the left TF of the video monitor, the cells of the body and entire systems undergo certain structural and physiological rearrangements, which lead to the emergence of psychogenic stress, to a decrease in the ability to adequately respond to external influences, including the actions of people around.

The influence of various factors of  CRT leads the body to the formation of complex systemic responses, which is fully consistent with the conclusion of those, who experts on the need to consider working with a PC, with Wi-Fi, being in geo-pathogenic zones and in the zone of negative impact of base stations of mobile phones as stress-factor".

Thus, we have a history of CRT research by Ukrainian specialists, who, using the Foll frequency device also recognized abroad proved the harmful and pathogenic effect of CRT screens on humans. The book recommends the use of the “FORSTAT” device for protection against pathogenic effects from the aforementioned and other electronic devices.

I got the idea to try using the crystal balls from the chandelier from the previous chapter as protection against the harmful effects of CRT screens on humans. But where to find a CRT TV in Israel at the end of 2021, when everyone is using flat LED screens? But, I was lucky here too, when I noticed a similar rarity in the gatehouse at the entrance of our Looky park. The guard at the entrance kindly allowed me to carry out the necessary experiments and take the necessary photographs. After that, I transferred them to my tablet and tested the action of the crystal with a pendulum. I bring to your attention the results.

In the first photo (before adding the crystal), the pendulum above the tablet screen rotates clockwise. In the second photo, when the crystal ball lies on the table under the screen, the direction of rotation of the pendulum is reversed, counterclockwise. In the third photo, the crystal ball is already above the CRT TV, and the pendulum is also rotating counterclockwise. In the fourth, last picture, where the interlaced frame change is clearly visible, the pendulum rotates with amplitude of 10% of the original, in the reverse direction, counterclockwise. 

This suggests that crystal products, as in the case of GPZs, invert and then focus the flow of pathogenic torsion energy emanating from CRT screens, and in the case when there is no other protection, they can be used to neutralize the pathogenic component of torsion fields arising in CRT screens of household TVs and personal computers. In simple terms: if you have a beautiful crystal vase or other crystal glassware, put it on your TV, and it will protect you from the dangerous effects of pathogenic radiation and possible health problems. 

(21/12/2021)

==========================================================================================================

====================================================

Part XVIII.

TF (Torsion Fields) of various monitors as form factor.

To understand the torsion pattern that occurs in CRT monitors, TFT and LED displays, I consider it necessary to refer again to the book of the remarkable Ukrainian scientist A. Pavlenko "Biosafe electronics. A step beyond official science", which reveals the reasons for the emergence of left TF and pathogenic radiation from modern monitors in the light of the theory of Physical Vacuum.

  << Recently, the problems of form have begun to attract the close attention of scientists associated with research on holography, Physical Vacuum.

The form can be the subject of concrete scientific study due to the fact that concrete material structures always have really existing forms. In the physical sense, the concept of form can be interpreted as a wave (field) structure, the contours of which depend on the spatial features of a particular object.

Figure 10 shows the torsion fields of objects with different geometric shapes. If the diameter of the cylinder is more than half of its height, then such a cylinder will create a right field along its ends, and in the middle there will be a narrow strip of the left field.

If the diameter of the cylinder is less than half of its height, then such a cylinder will create a left field along its ends, and in the middle there will be a narrow strip of the right field. The left torsion field exists inside the cone (Fig. 11), at a height of 2/3 from the base of the cone, the field is absent, and then there is the zone of the right torsion field.

In addition, the “field” activity of physical objects (structures, devices, substances, objects, physical fields, etc.) is known, for example, laser beams are highly coherent electromagnetic fields in the visible range of the spectrum, which also manifests itself in the informational influence on a person. 

Fig. 10.

TF of cylinders with different ratios of diameter and height. 

Fig. 11.

Torsion fields of the cone

Next, we shall consider the processes of polarization of the Physical Vacuum by electronic devices in more detail.

For example, a cathode ray tube of a turned off monitor polarizes the physical vacuum in such a way that there is a left torsion field on the side of the phosphor - a shaped field of virtual electrons, which in its propagation from the screen of the cathode ray tube does not differ significantly from the torsion field, for example, the walls of a building, and from the side of the cathode there is an insignificant right field.

A high accelerating voltage (27-30 kV) applied to the CRT anode carries out the charge polarization of the Physical Vacuum, which leads to the appearance of the left TF in front of the monitor and a right one behind the monitor.

In other words, the monitor is a TF generator with a symmetrical TF in opposite directions.

The deflecting system of a CRT, which scans the electron beam across its screen, is a ring structure, i.e. there are organized ring electromagnetic processes that contribute to the overall TF of a PC monitor, TV. In addition, the electron beam itself can be represented as a long cylinder, which also gives out conical left TFs in both directions (Fig. 12). 

Fig.12.

The electron beam moving towards the phosphor polarizes the Physical Vacuum in such a way that in the direction of the electron beam movement a left torsion field propagating over long distances is formed, since the virtual electrons of the physical vacuum born outside the cathode ray tube are repelled by the beam electrons of the tube itself. From the side of the cathode, respectively, the right torsion field arises.

The formation of the left TF was experimentally found during the bombardment of the CRT phosphor with electrons, which occurs in the presence of a high accelerating voltage on the first anode of the CRT during the image scanning on the screen. However, when in PC monitor or TV, Tesla transformer is used in the high-voltage unit, the phosphor field becomes right. The reasons for this change remain to be checked in the future with the development of monitors that have a minimal negative impact on humans.

From a physical point of view, electroluminescence is the glow of a phosphor, when the electrons of the latter excited by an accelerated electron beam emit light quanta, moving from one allowed orbit to another, i.e. change their energy state in the direction of decreasing energy, and changing the orientation of spins in space. This dynamic process is a factor that generates a wave of left TF that negatively affects a person.

When the PC monitor, TV and other similar devices are turned off, the spatially split particle and antiparticle in phytons automatically return to a symmetrical nested state, since the sources of perturbation considered above disappear, i.e. the spatially split state is unstable and can be maintained only in the presence of perturbation sources. However, the molded (form-factor) TF remains.

The structure of the screen panels of TFT displays is similar to the already considered structure of passive matrix displays (LCD). The main difference is in the replacement of two glass plates with strips of electrodes on one glass plate with a set of transistors formed on it in a layer of amorphous silicon. Each transistor is "responsible" for one pixel of the monitor image.

Transistor control currents polarize the Physical Vacuum in such a way that a left torsion field is formed in the direction of the front plane of the plasma panel, since virtual electrons born outside the panel are repelled. On the opposite side of the panel, respectively, the right torsion field appears.

Liquid crystal monitors (TFT-monitors) have an incomparably low level of EMR, but in terms of TF they are comparable to CRT monitors. Depending on the type of monitor, it contains 1÷2.0 (up to 8.3 in 4K displays) million pixels, which are hollow cylinders in which the height is greater than the diameter. It is known that such structures generate left TFs from the ends.

Therefore, the topographical effects of static TF are associated with hollow cylinders that carry this type of configuration to a large scale, resulting in the TF of powered TFT monitors being comparable to those of CRT monitors.>>

So, we found out that CRT, LCD and TFT monitors generate a left torsion field in the direction of the operator. Left torsion fields are harmful to humans because their DNA has a right margin. To prevent the harmful influence of the TFT monitor, we will use the crystal object in the same way as we did in the previous part 17. Photos of the monitor without/with crystal are shown below. 

In photo of the monitor from left (without crystal), the pendulum, when remotely checked through the tablet, rotates counterclockwise over the image of the computer monitor turned on (left TF), and in the right photo (with crystal), it practically stands still. This once again confirms the same behavior of the pendulum when working with the GPZ (Chapter 16) and CRT (Chapter 17).

Well, now, finally, let's discuss a little the very remote work with the tablet. To do this, you need to know that opposite right and left TFs behave radically opposite to opposite electric charges or magnet poles. As is known from the course of school physics, opposite poles of a magnet (electric charges) attract, and the same poles repel. With torsion fields, the opposite is true: like-named ones attract (and intensify), and opposite-named ones repel. Thus, TFT-monitors producing left TF amplify left TFs (negative effects of GPZ, etc.), which we look to identify using the distant method. And we benefit from this.

    If the monitor screen was producing only the right TP, then it would be practically impossible to identify through it the pathologies of a map, photograph, plan or other objects. We may experiment in the future with a PocketBook screen that uses E Ink Pearl technology to create an image without electronic control (the battery is consumed only when the image changes).

P.S.:

I am pleased to inform everyone interested in working with the remote dowsing method, as well as those concerned about the exposure of the operator to the left TF (torsion field) from the monitors used in this case, that after a series of experiments with the PocketBook that is at my disposal (model 622, diagonal 6"), I found that this method works like a photograph, and the monitor of the device is "neutral" and does not emit unwanted "background" left TF.

Also, in continuation of the experiment with a crystal ball and a TFT monitor, I carried out a similar test with the LED monitor of my home 4K Smart-TV. Photos are not published due to the identity of the results. The crystal ball also "folds" the left TF of the working monitor and inverts it. The pendulum above the photo with crystal is standing steal. [02/03/2022]

===================================================================================================

[12/07/2022]

Part XIX.

Crystals and minerals in the GPZ.

It has long been suggested to test the influence of various crystals on the flows of pathogenic energies in the GPZ. To begin with, let's take ordinary kitchen salt and place it in our experimental GPZ (-) (photo 3), the flow of which, I remind you, is directed from bottom to top, and the pendulum is twisted counterclockwise. Salt in my subconscious is associated with the red and green colors of the spectrum. After bringing the jar of salt into the GPZ, we will test the space above it with a pendulum. The rotation of the pendulum stops. After that, we’ll remove the salt and check again. After a short period of time (about half a minute), the circular rotation of the pendulum above the GPZ gradually resumes. The mechanism of the impact of salt crystals on the GPZ, according to external signs, is similar to the termination of the flow of torsion energy when the GPZ is illuminated with blue light, which I described earlier in this article.

The same result can be achieved by using sugar instead of salt. Sugar is associated with the violet color of the spectrum.

The layer of substance in the jar during the experiments with sugar and salt was several centimeters, the material of the jars was plastic, and the diameter was about 8 centimeters.

After successful experiments with domestic sugar and salt, let's move on to experiments on minerals.

For further tests, we will use the minerals at our disposal, which are semi-precious and precious stones used in jewelry: labradorite, chrysoprase and diamond. The first two are set in silver and are rings. The last stone, in the amount of 11 pieces, is encrusted in the dial of a Raul Russo watch (Diamond Collection), and, judging by their low cost, is artificially obtained (means, it is cirkonit) But, this does not upset us much - let's conduct an experiment with what is available.

So, we put our minerals in turn into the GPZ (-). All of them stop the rotation of the pendulum above it, and when been withdrawn from the GPZ, the rotation of the pendulum is restored with the same diameter in a short period of time, about half a minute.

Conclusion: the minerals tested above, as well as crystals of edible salt and sugar, when been put in the GPZ, stop the rotation of the pendulum in the dowser’s hand and, thus, it can be suggested that they neutralize the flow of pathogenic torsion energy.

[08/07/2022]

In our additional experiments with GPZ(-) will use mono-crystals of sugar 1.5-2 cm each, packed in a plastic bag. Photos of GPZ(-) without and with sugar crystals are shown below (photos 3 and 4). Also in photos 1 and 2 (top) are illustrations of mono-crystals before unpacking.

I want to note that all the photos before / after / during the neutralization process given in this article are “active”. It means that each reader can check them with a pendulum and make sure by himself that all of the above is correct and true.

After experiments with various crystals, we were convinced that all of them, when been put into the GPZ, stop the rotation of the pendulum in the hand of the dowser. This leads to the idea that the energy flow in the GPZ is a structured space with a chaotic distribution of information (whose entropy is equal to one). Further, when crystals with an ordered structure that repeats itself many times are put into, the energy flow is harmonized, as a result of which the process ceases to be chaotic (random), as well as damaging DNA information structures, and, as a result, pathogenic.

Based on this, we will conduct another experiment with GPZ (+). Recall that in it, according to my rule of the right hand, the flow is directed from top to bottom. Let's bring our mineral labrador into this GPZ (+) and check the space with a pendulum BEFORE the flow meets the mineral. The pendulum in this case also stops rotating and stops. It means that the flow of pathogenic energy is harmonized in both directions. Eureka! We have found another way to neutralize GPZ and pathogenic energies around us. No wonder, probably, the ancients were so fond of wearing various minerals of all forms. :-)

[23/01/2023]

  Let's add to our list of minerals experiments with a crystal of rock crystal (a kind of quartz), which I conducted a few days ago. To do this, we will input the above-described single crystal [photo on the right] into our experimental home GPZ (-) [photo on the left]. In this case, the rotation of the pendulum in the GPZ decays, as in previous experiments with food crystals and noble stones.

[26/09/2024] Pearls and shells, like crystals, neutralize the GPZ.

==========================================================================================================

[12/06/2025]

Solar panels and PTR.

Recently, in the Bulgarian Dowsing Group, in which I am a member, a question was asked, whether solar panels installed on the roof of a house are harmful.

After a short study, which consisted of placing a solar panel from a pocket calculator in the active GPZ (geo-pathogenic zones) on the territory of my house with subsequent measurements and testing with a pendulum, it fixed out that solar panel elements are effective neutralizers of PTR (pathogenic torsion radiation), since the rotation of the pendulum, when such elements are introduced into the active GPZ, stops.

The effect on the GPZ is due to the crystalline structure of the solar panel, which is similar to the crystals and minerals placed in the GPZ.

Thus, solar panels installed on the roof of a house are not a threat, but protection from the PTR (pathogenic torsion radiation) observed in the GPZ (geo-pathogenic zones).

[28/06/2025]

===================================================================================

[14/07/2022]

Part XX.

Ceramic infrared plates and neutralization of their pathogenic radiation.

    A long time ago, at the very beginning of my research on neutralization the pathogenic component of the torsion radiation of various GPZs and "harmful" electronic devices, Henry, the driver of my regular bus, who at that time bought a Ceramic InfraRed plate for cooking at home, knowing about my hobby, asked if is it harmful, and if so, how can it be corrected within the frames of my activity... In response, I asked him to send me a photo of this stove, but after thinking a little, I decided to postpone it, because I was afraid that a powerful IR radiation from a running stove can damage his cell phone camera sensors.

And, as if on cue, I come across a cardboard box from under an identical IR tile with a great photo, which I retake with my cell phone (pictured). Using a remote dowsing method, I determine with a pendulum that both sections radiate a pathogenic torsion field directed UPWARDS during operation, with the smaller section radiating a more powerful stream. Due to the fact that the flow of the pathogenic field is directed upwards, all the food cooked on the stove, without exception, gets into it, and this is very harmful for the one who cooks and the one who eats it. If a dish prepared on such a stove contains water (which has a certain "spin-electronic memory"), and water is present in most products, and is also used when cooking them, then, undoubtedly, all food prepared in this way, to put it mildly, will not be healthy, but pathogenic ...

What can we do to avoid this? In order for my friend Henry and his entire family, as well as all people who use IR stoves, to eat healthy food cooked on them, I propose to refer to the previous part of this article, which describes how crystals and minerals of various substances neutralize the flow of pathogenic radiation in GPZ.

According to what I have stated above, it is necessary to put into the streams of the pathogenic field (it is possible from the back side of the emitters, under the IR stove) some hard-melting crystalline substance. At first I thought of recommending small sheets of mica for this purpose. But, having "googled" this mineral on the Internet, I found that, despite the fact that the melting point of mica is +1330 ° C, it retains its properties only up to a temperature of +800 degrees. At higher temperatures, the sheets swell, as a result, performance is lost, and this is undesirable. The second candidate was quartz. The melting point of quartz is 1713-1728°C, which is enough to withstand the heat of our IR tile and fit into the gap underneath without interfering to the process. Using a special encyclopedia of colored stones, I can report that the varieties of quartz are rock crystal, amethyst, smoky quartz, morion, citrine, ametrine, prasiolite, rose quartz, opal and chalcedony. However, I in no way limit your creative erudition. Any hard melting crystals or mono-crystals, available to you, that do not interact with food, will do.

  I wish you all good health and success in your home experiments!

TO BE CONTINUED…

======================================================================

[25/04/2023]

Part XXI.

Luminophors and fluorescents.

  In this section, we will leave our neutralized GPZ alone and turn to such exotic concepts as phosphors. For reference, I will inform you that these are substances that glow in the dark after being illuminated with light. Phosphor paint is used to put numbers and marks on the hands and dials of watches, on the panels of various instruments, speedometers in cars that glow in the dark. Phosphors are added to plastic in the manufacturing of jewelry. Well, of course, it was used in old CRT televisions, applied to the back of the screens to produce an image when they were "bombarded" with a beam of accelerated electrons. Also, fluorescent daylight lamps are covered with its variety, giving white light in the presence of ionized gas inside the lamp when turned on. Of course, this should also include multi-colored gas-discharge advertising on the streets of our cities, etc., etc.

  Let's set ourselves the goal of investigating this phenomenon from a torsion point of view. To do this, we select several examples of phosphors from the list above. We have at our disposal a SEIKO alarm clock with a luminous dial (photo on the left) and a piece of jewelry - a single bead that I found 40 years ago (photo on the right). For the purity of the experiment, we will provide complete darkness during shooting and preliminary illumination for photo-accumulation.

  The resulting images are examined by our pendulum. In both cases, it rotates COUNTER-CLOCKWISE, and, consequently, the energy emanating from objects is negative and pathogenic.

  Upon further investigation, it turns out that pathogenic energy comes from the objects under study also under normal lighting.

  What can we do to neutralize the harmful effects? Let's turn to one of my methods described above in this article for neutralizing pathogenic radiation. It is enough to "load" our piece of jewelry with a crystal object (pictured below), as the rotation of the pendulum stops. This is another plus for lovers of crystal masterpieces.

  What about alarm clocks? To diversify the method, we put a ring with the Labrador mineral next to it (pictured below). The proximity to the noble stone did not affect the behavior of the pendulum when checking the photo by the remote method - it continues to rotate counterclockwise, indicating pathogenic radiation.

  Next, we will also check the available fluorescent lamps (pictured below). The pendulum also rotates counterclockwise here, indicating negative pathogenic radiation. Therefore, it is recommended to use other types of lamps (LED, incandescent) or place the lamp under a crystal lampshade.

[24.02-1.03-25.04/2023]

=======================================================================

=====================================================

[20-29/09/2023]

  Continuing the theme of luminophores and fluorescents, I would like to point out that not everything is so bad if you look at the dial with glow-in-the-dark elements through the sapphire crystal glass. Many watch models from leading manufacturers are now equipped with sapphire crystal glass. This idea is quite expensive, but it pays off when the manufacturing company wants to protect the dials of its watches from scratches and cracks caused by careless handling and accidents.

  Soon after purchasing such a watch, I decided to test with my radiesthesia pendulum the effect of sapphire crystal on the harmful torsion radiation that occurs when the dial, which has fluorescent markers, is illuminated (see photo). 

  To my deepest satisfaction, the pendulum above the photo did not rotate. This means that the glass is truly sapphire, and it neutralizes harmful torsion radiation coming from fluorescent (luminous) elements.

  I conducted the second experiment with watches, placing them in the GPZ (-) at my home testing ground. The pendulum stopped rotating in this case as well, indicating that the sapphire glass on the watch can serve as a neutralizer of geo-pathogenic zones when added, like mono crystals and precious stones.

[10/10/2023]

=====================================================

[07/05/2023]

Part XXII.

BlueTooth and protection against its PTR.

  Returning to the topic of "malicious refusenicks", we recall that electronic equipment using the BlueTooth protocol for communication and data transfer has not yet succumbed to any persuasion, and has not given the possibility of protection against PTR (Pathogenic Torsion Radiation) that occurs during its operation. However, this problem was also solved, with God’s Help.

  To begin with, let's check with our pendulum the field above the working BlueTooth speaker. The pendulum rotates rapidly COUNTER-CLOCKWISE. According to my Rule of the Right Hand, described at the very beginning of the article, we determine the direction of the flow of pathogenic energy - from the speaker up. Now let's try to neutralize it in one of the ways described in this article, namely, by introducing a crystal fragment into the scattering antenna flow. As it turned out when re-checking the pendulum, the flow of PTR at the same time changes its direction to the opposite, it means, it is reflected by the crystal but does not stop. Then a brilliant idea came to my mind: I put the second crystal chandelier fragment also on the source, which in our case is a cell phone paired with a BlueTooth speaker and broadcasting music content to the speaker. As host Yakovlev said in the famous Soviet-time television program "What? Where? When?" - a complete victory of the connoisseurs. The pendulum stops rotating over both members of the BlueTooth pair - both the speaker and the cell phone. For clarity and the possibility of checking with a pendulum by you, I give a picture of the experiment.

  This may indicate that with a BlueTooth pair, it is necessary to neutralize the PTR in both directions by applying crystal fragments to both members of the pair. Explanations can be sought from the point of view of quantum physics, but we will leave this matter to the new generation of young physicists. :-)

  We will also test another advanced method for neutralizing PTR using mono- crystals. We use sugar crystals for this purpose (who has noble stones - I think, it will also work). The results are identical to the previous experience. The pendulum stops after 30 seconds. For clarity, a picture of the second experiment is also attached.

  Well, and finally, for a curiosity, neutralization in two ways at once: a crystal fragment and a mono- crystal of sugar (see picture below). And here, everything also works, and the pendulum stops over both members of the BlueTooth pair. It means that the PTR (Pathogenic Torsion Radiation) that occurs during the operation of BlueTooth is NEUTRALIZED.

  It’s worth noting that the hologram paper used to protect my cell phone from cellular PTR and Wi-Fi is not any kind of protection for the BlueTooth protocol as well. :-(

------

  I wish you all good health and new successes!

-------

7/05/2023

===================================================================================

I think, I must also share my experience in neutralizing the pathogenic torsion component of BlueTooth radiation when using BT-headphones.

  Recently, "God sent" me brand new vv6 stereo headphones for my experiments (pictured). I am usually skeptical of such a "technique", as it causes me piercing pains in my head. But this time, I decided to double-check everything. And so, after "pairing" with my cell phone, I put them on my ears, hoping to listen to music and practically appreciate the sound quality. But, without listening to the end of the second song, I was forced to take them off because of the pain going from the right ear to the inside of the head ... (maybe I got this after a close acquaintance with the Chernobyl accident in 1986 and its far-reaching consequences). But, despite this, I liked the headphones for their design and ease of use. What was to be done?

  Having in mind that I have already found the fundamental protection against the pathogenic torsion component of BlueTooth radiation (see earlier), I decided to apply it to BT headphones as well. For a cell phone, I used sugar mono-crystals, and for headphones I took a noble stone bead (any one will do) and screwed it with a wire to the right earpiece of the pair, where the power and control buttons are located, as well as the recharging jack, and there should be a radio transmitting BlueTooth antenna... (on photo)

  I listened to the next Frank Sinatra album without any pain in my ear and head. I checked it for myself, listening to music for 2 hours daily and making conversations on the phone with headphones.

  We should not forget that the "protection" should be in close proximity to the receiving and transmitting antennas of both the phone and the headphones. If the headphones are not physically connected by wires, then the antennas are located in each of them, both in the right and in the left, and proper protection must be installed on both elements of the stereo pair.

  The range of reception and transmission has not changed, and remained within 10 meters. :-)

  I want to draw the attention of those who wear earrings in their ears and use BT headphones at the same time. Incrustations of noble and precious stones can also play the role of protection against the harmful component of BlueTooth radiation.

------------------------------

(17-19-23/8/2023) 

Part XXIII.

Testing the Theory of Physical Vacuum

using the remote method in an experiment with an air ionizer.

   Using A. Pavlenko’s book “Biosafe Electronics. A Step Beyond the Horizon of Official Science,” let us turn to modern ideas about the Physical Vacuum. In Maxwell-Dirac electrodynamics, the physical vacuum is a “boiling broth” of virtual particles and antiparticles - electrons and positrons, i.e. in vacuum, virtual particles constantly appear and disappear. They are considered virtual because their lifetime is too short and limited by the Heisenberg uncertainty relation. In other words, in quantum field theory, fluctuations are interpreted as the birth and destruction of virtual particles (that is, particles that are continuously born and immediately destroyed), or virtual quanta of a given field. In a vacuum, various pairs of particles-antiparticles are born, and these pairs can be based on electrons, protons, neutrons, quarks, etc. Virtual particles participate in interactions in the same way as real ones. For example, a virtual photon is capable of generating a virtual electron-positron pair, similar to the birth of a real electron-positron pair by a real photon. Electrons, for example, constantly emit and immediately absorb virtual photons. It should be noted that the content of the concept of “virtual particle” has undergone significant changes. Previously, virtual particles were understood, as a rule, to be particles in virtual states, such as photons, electrons, pions, which were well studied in real states. A class of particles has appeared (quarks, gluons), which in principle cannot be in real states due to the confinement property of quantum chromodynamics and manifests itself in experience only as hadronic jets, i.e. in a certain sense, virtual particles acquired the status of observables. That is, if physicists cannot detect an individual virtual particle, then their total impact is clearly visible (Casimir effect, 1965). The concept of virtual particles plays an important role in understanding their internal structure, which has a complex structure, especially hadrons. The picture of the structure of hadrons uses the concept of a “coat” of virtual particles “clothing” the corresponding “bare” particle. We will use the concept of a “coat” of particles further, considering the Physical Vacuum, consisting of virtual electrons, positrons and photons, i.e. we use only a small part of a more complex reality. 

Fig.1

  Figure 1 shows a “virtual chain” of transformations. From left to right, events occur as follows. A virtual photon, having traveled a certain distance, turns into a virtual electron-positron pair. The electron and positron make half a revolution in opposite directions, drawing a circle in space. At the junction they disappear and give rise to a virtual photon that moves on...

  The virtual electron-positron pair creates a ring current, and the ring current creates a magnetic field B, the configuration of which is similar to that of a bar magnet. Such elementary virtual magnetic dipoles arise in a vacuum constantly and everywhere. They are oriented randomly and therefore the total magnetic field is zero. Let's take advantage of the hypothetical approach and consider a simplified system consisting of only one electron. We believe that there are no real photons in such a system, but fluctuations of the Physical Vacuum lead to the appearance of a “cloud” of virtual photons near this electron, and after them - virtual electron-positron pairs.

Fig.2

  Such pairs behave like bound charges in a dielectric: under the influence of a Coulomb field they are polarized in the manner shown in Fig. 2, i.e. virtual electrons participate in interactions in the same way as real ones, that is, they are repelled from a real electron.

  It is known that as a result of the annihilation of an electron-positron pair, the rest mass ceases in EMR, accompanied by a torsion component. In addition to the fact that the electron and positron have spin 'S, as well as electric and dipole moments 'M and 'D, oriented in a certain way relative to each other; where annihilation occurred, an element of the material environment with the structure of the Physical Vacuum remains, which includes a pair of wave packets of particles with directed spins nested within each other. This material medium represents a kind of matrix for the possible birth of an electron and a positron from the physical vacuum in the event of its interaction with particles having high energies. In this case, the birth of real matter from the Physical Vacuum occurs, that is, matter passes from a virtual state to a real one. Perhaps the origin of the matrices is associated with the phenomenon of the formation of forms from primary movements and the process of self-preservation of the created forms. The mentioned matrix contains an information component that provides the corresponding characteristics of the electron and positron in the event of their materialization. Where annihilation occurred, a neutral EMF also remains, which has the dimension of energy flux density, which is in good agreement with the above.

  These and some other facts allow us to choose A.E. Akimov’s model as the basic model of the Physical Vacuum.

  In accordance with the model used, the Physical Vacuum is defined as a material medium that isotropically fills all space (both matter and free space), not observable (on average over time) in an undisturbed state. The mentioned material environment consists of elements that are formed by pairs of particles and antiparticles (according to P. Dirac, electron-positron pairs). It is believed that electron-positron pairs are virtual. Using this sequential series, one can name a whole family of leptons and baryons, which forms a set of ephemeral particles that arise in high-energy collisions. We can now try to form a complete picture of the vacuum filled by the vast family that undoubtedly exists on the other side of the border of reality.

   Fig. 3 shows the torsion models of the electron and positron, respectively, according to Charles Leadbeater and Annie Beasant [9]. 

Fig.3

  It has been established that the electron has a negative charge, and the positron has a positive charge. We emphasize that in this case we have models of real particles. Let us consider the origins of the appearance of electron and positron charges, taking into account the existence of virtual particles. The left side of Fig. 3 shows the anu-electron vortex. Inside the anticlockwise-rotating volume of the electron, a circular polarization of the physical vacuum occurs, leading to the emergence (appearance) of a left-handed torsion field, the intensity of which increases with distance from the axial zone. In addition, this state of excited physical vacuum practically leads to the fact that in the axial zone the physical vacuum as an information structure is completely repressed, i.e. the symmetry of the physical vacuum phytons is not broken. The above statement can be verified by an experienced dowser or with IGA-1, VEGA-10, VEGA-11 devices with an enlarged image of the electron. The positron looks exactly the same, in which everything is completely identical to the torsion model of the electron, with the difference that the vortex of the electromagnetic field has the opposite direction of twist, which is the reason for the appearance of a right-handed torsion field around the positron, consisting of virtual positrons.

MODELS OF POLARIZED STATES OF PHYSICAL VACUUM AND TF

Quantum structure of phytons.

  We rely on the idea of many researchers about the existence around any material body of an “aura” or “halo” in the form of some kind of virtual particles.

  For A.I. Veinik, these were “chronons” [100,101], which have colossal penetrating power and interact with the environment.

  An electron surrounded by a chronal field reflects the flow of chronons, although chronal flows and fields have enormous penetrating power. Chronally charged bodies - sources of the chronal field - interact in this way: sources with chronal charges of the same name attract, and sources with opposite chronal charges repel.

  In 1989, an article by candidate of technical sciences A.F. Okhatrin appeared in the “Reports of the Academy of Sciences (USSR)” about the discovery of a new particle, which he called “microlepton”. During the experiments, he came to the conclusion that all objects of the material world are surrounded by fields of ultra-light particles. All environments and living systems are filled with them. Particles carry information about the composition and structure of bodies. According to Okhatrin's hypothesis, these fields interact with various substances, electromagnetic fields and living organisms.

The occurrence of TF can be explained using the phyton model of the Physical Vacuum (PV), proposed by A.E. Akimov, which is the electron-positron model of  P. Dirac's PV in a slightly modified interpretation, and which we will use in the future. Phyton is characterized by zero values of mass, charge and spin, as well as the lepton number, which is introduced to distinguish between particles and antiparticles such as the electron and positron. But does this mean that it also has no internal structure? Akimov’s model does not answer this question.

   To understand this issue, without overcomplicating the analysis, we will consider a phyton formed by a pair of the simplest leptons, i.e. light particles- electron and positron. The situation for other pairs, for example proton and antiproton, which can also form a phyton, will not be fundamentally different:

- taking into account the requirement of “non-observability” in the specified system, it is necessary to have compensated spins, and the system itself can be represented as a pair of particles nested inside each other with oppositely directed spins (SR and SL); due to true electrical neutrality and opposite spins, such a system will not have a magnetic moment;

- the particle-antiparticle system must have a set of quantum energy levels, since there is an experimentally established fact of the birth of a pair of particles and antiparticles from the Physical Vacuum with an appropriate choice of the energy of the quantum flow. If the physical vacuum contained particles, then free space would have strong gravitational fields. But this is not observed. Therefore, the generally accepted point of view is correct that vacuum is a state without particles. The phytonic model is based on the assumption that the vacuum contains not the particles themselves, but vortex structures corresponding to particles and antiparticles. A system of particles and antiparticles with the indicated properties is called a phyton (Fig. 4), and the environment formed by a dense packing of phytons is called a Physical Vacuum (Fig. 5). 

                                 Fig.4                                                                          Fig.5

  Let us emphasize that with the described approach we obtain a convenient, although different from modern concepts, simple model of the Physical Vacuum, which allows us to explain many phenomena that are inexplicable from the position of the traditional approach.

  Phyton simultaneously has both the properties of a particle (a combination of wave functions, for example, an electron and a positron), and a space-time structure, which in the ground state determines the intrinsic spin moment of this object through the twisting of certain space-time characteristics. Twisting is a peculiar characteristic of space-time, which provides the own moment of rotation of this dualistic object. Phytons circulating in vortices around the nuclei of atoms build a spin matrix a thousand times smaller than the atom itself.

  Let us consider the situation associated with the disturbance of the Physical Vacuum by the charge +Q. In this case, charge polarization of the Physical Vacuum will occur in the space surrounding it (Fig. 6). The process of polarization of the Physical Vacuum for the case of its perturbation by the charge (-E) of the electron will be considered in more detail in the future.

       Fig.6

  The electrical charges of the particles forming the convolution will no longer completely compensate each other, but will shift slightly in the direction of the external field. Each particle will begin to swing up and down relative to the minimum energy level. Such charge polarization of the phytonic “emptiness” can be interpreted as an electromagnetic field.

  If the source of disturbance is the classical spin or the density of angular momentum of rotation at the macroscopic level, the polarization of the Physical Vacuum is carried out as follows: if the source of disturbance has a spin (Fig. 7, 8), then each phyton has a spin that is oriented opposite to the spin of the source, experiences inversion in a plane transverse to the normal to the source of disturbance. 

                                 Fig.7                                                                                           Fig.8

  As a result, in some space surrounding of the source of disturbance, the Physical Vacuum will be in a state of spin transverse polarization, and the dimensions of the polarized space are related in a certain way to the magnitude of the disturbance factor.

  The phytonic model of quantum vacuum proposed by A.E. Akimov does not contradict the modern paradigm of fundamental interactions, but allows us to go beyond its boundaries by introducing a new, fifth type of fundamental interactions - TF (Torsion Field). Within the framework of this model, it is possible to offer a unified interpretation of gravitational, electromagnetic and torsion interactions from a unified quantum-vacuum position. The question of weak and strong interactions remains open. The phytonic model means, therefore, a fundamentally new approach to solving Einstein's problem - the creation of a unified theory of fundamental interactions.

  The distinctive feature of this approach is that it allows us to propose an organic synthesis of both theoretical models - geometric and field [36].

  Let us recall that earlier we considered the situation associated with the disturbance of the Physical Vacuum by the charge +Q. This model of charge polarization of the Physical Vacuum is presented in the early works of A.E. Akimov [2].

  A similar model of the polarization of the Physical vacuum, associated with the perturbation of its electron E, appeared in 2007 in the book of Roger Penrose. Fig. 9 demonstrates the process of charge polarization of the Physical Vacuum and is taken from the book [11]. In Fig. 9, virtual electrons are blue, virtual positrons are red.

  Let us consider the polarization process in more detail. We will consider electron E (Fig. 9) to be a point charge located at some point in space. In this case, the effect of polarization of the Physical Vacuum can be represented as follows. Suppose that at a certain point in space, located nearby the electron E, the birth of a virtual pair of particles - an electron and a positron - occurs, which, after a very short time, annihilate each other, i.e. the birth and subsequent annihilation of the pair should occur in an external electric field created by the electron E.

Fig.9

  The effect of this external field is that the born virtual electron is slightly repelled by the electron E, while the born positron is slightly attracted by it, so that there is a physical separation of these charges during their short-term existence, i.e. the symmetry of the phytons is broken. This phenomenon occurs all the time and everywhere around the electron E, which leads to a net effect called charge polarization of the Physical Vacuum.

  Assuming that the vacuum contains phytons that form a linear packing, Akimov formulates three postulates for alternative modes of perturbation of this structure, one of which we will use further.

  If the source of disturbance is an electric charge, then charge polarization of phytons will occur in the vacuum. They will be located along positive or negative lines of orientation of electron-positron pairs, regardless of spin. One can imagine how, as a result, each particle swings up and down relative to the minimum energy level, similar to the propagation of a packet of electromagnetic waves in space. We repeat that such charge polarization of the vacuum can be interpreted as an electromagnetic field.

  It is clear from this that since any type of substance contains spinning particles, orbital electrons and molecules, substances have both an internal polarization of the Physical Vacuum and an external one, which manifests itself in the polarization of free space around them.

  It is characteristic that all, without exception, electronic products that are not turned on carry out the polarization of the Physical Vacuum due to their geometric structure in accordance with Fig. 9, i.e. around such products there is a halo (aura) in which virtual electrons or positrons predominate (old CRT monitors, televisions - virtual electrons are generated in the direction of the user, and virtual positrons are generated on the opposite side). When electronic devices are turned on, the polarization space of the Physical Vacuum expands significantly and virtual electrons have a negative impact on users.

  One of such electronic devices that prompted me to write this chapter and start testing the Theory of Physical Vacuum was a cheap air purifier that included an air-ionizer (pictured).

    I thought that the air enriched with negative ions at the output of this device represents a fairly close model of a polarized Physical Vacuum. Therefore, I decided to study it with my dowsing pendulum directly and remotely, photographing it in various states and placing it on a tablet.

So, in the photo on the left, we see the top panel of the ionizer in the off state. The pendulum above the photo does not rotate. In the photo on the right we see the same panel, but in working condition. The ionizer ejects upward a stream of air saturated with negative ions. When checking with a pendulum, it shows anticlockwise rotation, indicating a negative torsion field, coinciding in direction with the rotation of the pendulum above the photograph of the electron in Figure 3 (left).

CONCLUSION: Everything in our World is interconnected. :-)

Excerpts and drawings from the book by Anatoly Pavlenko were used: “Biosafe electronics. A step beyond the horizon of official science.” LAMBERT Academic Publishing. p.14-24

[23-25/10/2023]

=====================================================

[18/02/2024]

Part XXIV. Conclusion.

  In conclusion, I would like to note that some of my methods for neutralizing pathogenic radiation were hardware tested (using the VEGA device) by my colleague from Denmark, Kim Horsevad (Horsevad Independent Technical Research & Analysis, Tryvej 96, DK-9750,Denmark), for whom I express my gratitude. Thus, the positive results of neutralizing GPZ using magnets, mirrors and hologram paper are confirmed.

  It is necessary to take into account the fact that following from my observations of domestic GPZ, that geo-pathogenic zones are not always located in the same place, once determined. Several days before moderate geomagnetic disturbances in several ranges that followed this deviation in mid-December 2023, a displacement of the 2nd order Curry GPZ was discovered by 1.5 meters east of its normal position. Also changes in the direction (onto the opposite) and the flow intensity of the torsion field in the GPZ can be observed under the same circumstances.

  After the passage of magnetic storms, all parameters of the GPZ (flow direction, location, intensity) return to normal.

  The next stage of my research will be development of my own electronic device for determining GPZ, but that's a completely different story :-)

==============================================================

Q&A:

No.1  [14-15/05/2023]

Catalin Tomescu

   Yuri, I am learning as I read. Thank you for posting this.

Been familiar with Slim Spurling’s method of reducing GPZ by placing metal rods in the ground perpendicular to the incoming direction. Measuring the line after with L- rods I get no signal from them. Now I use inside addesive copper band thats bind perfectly to the wooden floor and tiles.

I appreciate your work, looking forward to read you entire research 

---------

Hi Yuri, revisited your article. Here it says HARTMANN grid flows from N to S and E to W.

Before i read your article , I got into dowsing and blocking GPZ as well as Hartmanns, and ive been following the Hartmann grid totally the opposite, as flowing from S to N and W to E.

Can you give more details about why there is different telluric flow? Thank you for your answer in advance.

Yuri Smolyansky

 Are You a right-hand dowser?

Catalin Tomescu

I guess im mostly left-handed but i use right hand as well.

Yuri Smolyansky

This is the reason. Your energy flow is reverse.

============================================================== 

   For Your attention, my site "LOT of LIFE" (since 2009) in English

===============================================================================

   Used materials & references:

1. Semenova. “Working with a pendulum and Feng Shui.”

2. сайт РАДИОСТЕЗИЯ. 

3. [***] Anatoly Pavlenko “Biosafety Electronics. A step beyond the horizon of official science”.  

Анатолий Павленко «Биобезопасная электроника. Шаг за горизонт официальной науки» Lambert Academic Publishing.

4. Domain wall (magnetism). Wikipedia.

5. Koltovoy Nikolay Alekseevich, Book-11-h5-Geopathogenic zones

6. Кравченко Ю.П., Давлетов М.И., Давлетов Р.М. (Уфа) Геоэкология. Геопатогенные зоны в Уфе. http://www.maenug.ru/text18.htm Исследование влияния сетей на онкологические заболевания.

========================================================================

© Copyright: Ашер Рав-Модед, 2015- 2025.

------------------------------------------------------------

Свидетельства о публикации 

№216011901849; №215121602254; №215121602264; №215121602273; №215121602282;

№215121602287; №215121602292; №215121602298; №215121602310; №215121602314;

№217021802035; №217111902343; №217112602377; №218012002336; №219102001407;

№219102001410; №219102001417; №219102001419; №220041301832; №220052301836;

№220052301850; №220081801585; №220121201473; №221080801577; №221103101888;

№221110301615; №221110301616; №221110301624; №221110301629; №221122200657;

№222022101779; №222071201520; №222071401486; №223040901597; №223040901608;

№223040901615; №223040901620; №223053001446; №223053001448; №223053001455;

№223081901055; №223092901579; №224021801928; №225061801281.

-----------------------------------------------------

© Copyright: Yuri Smolyansky, 2015-2025.

 ========================================================================

Info Desk:

1. [15.07.2018] Started development and creation of an electronic device similar to IGA-1 with the western set element base for detecting and measuring the potentials of torsion fields. Primary circuit diagram + computer simulations = are ready.

2. [27.07.2019] Work on the prototype of the IGA-1 in the western version is frozen due to the high cost of the components (about $ 60 - for 2 chips), and the complete absence of any financial support and interest to the topic.

3. [7.09.2019]  Continued works on the IGA-1  prototype  in the western version. Found a cheaper equivalent to key components (about $ 6 per 1 chip). Continued computer calculations and development of the device circuit.

4. [20.10.2019] I express my deep gratitude to my colleague Ruslan Volozhanin, who personally financed and provided the key components for the IGA-1 western version prototype development project.

5. [19/03/2020] Work on bench tests and development of the prototype MoDem-PI-1 device (western version of IGA-1) is frozen due to the Corona virus pandemic around the world and the lack of supplies of necessary electronic components.

6. [24.10.2020] The project for the development of an electronic device was closed as unnecessary, and also due to lack of any interest to the topic in Israel. There is no support and no funding. Further experiments and research will continue, based on the dowsing data available to the author so far. The author of this article, seeing the urgent need for instrumental verification of the results of his research and experiments, appeals to the general public of interested readers who have at their disposal the proper equipment (IGA-1, VEGA, SEVA, etc.), with the aim of possible carrying out such checks. I kindly ask you to inform me about the obtained results.

7. [29/01/2021] I would like to express my gratitude to my colleague Ruslan Volozhanin for the repeated assistance to the MoDem-PI-1 project and the delivery of key electronic components in the shortest possible time (despite the Corona-virus pandemic)! Thank you very much!

8. [18/05/2023] Starting working on antenna’s variants. 

9. [11/12/2023] The first successful tests of the prototype of the "Mo-Dem PI" device for determining GPZ were carried out. The video shows the locating of GPZ (Currie 2-nd order) during subsequent testing with a pendulum.

[28/06/2025] New updated materials are published after the last improvements.

========================

[18/12/2023]

"PI-NT-A" - an electronic device for detecting GPZ - geo-pathogenic zones.

    The PI-NT-A device consists of 3 parts:

    MoDem-PI - an analog part that measures the phase difference of the input signal at the reference frequency and converts it into a DC signal displayed by the indicator.

    Digital-NT - a digital part containing a reference frequency generator, with the ability to adjust.

    A - a remote unit containing a Torsion Antenna, some controls and an indicator - a bipolar microampermeter with a full deflection scale of +-50 uA.

To perform measurements, it is necessary to place the A unit behind the torsion screen, which blocks torsion field and zero it using the "zero setting" trimmer resistor. After that, search for GPZ. The power of the torsion field flow can be judged by the readings of the variable millivoltmeter connected to the DMM point for the maximum voltage of the 200 mV scale. The more powerful the torsion field flow in the GPZ, the greater the amplitude of the input signal in the antenna path, measured by the millivoltmeter.  However, having in mind that the level of constant voltage at the circuit output depends not only on the phase difference, but also on the amplitude of the input signal, it is not possible to measure the power of the torsion field flow in the GPZ in absolute electrical or physical units without additional devices. It’s the case for next generation device development.

Let's look through the functional description of the operating principle of the main MoDem-PI unit. It works like this. The input torsion signal goes to the antenna, shown in the diagram as an equivalent source of alternating voltage Vin with an antenna capacitance Cant connected in parallel with it, and from it to the input voltage divider. Having no idea about the nature of the input signal, we will consider its spectrum to be continuous, like white noise. The required frequency f=3200 Hz will be get in the following elements of the circuit.

For the purposes of subsequent debugging, we will accept the frequency of the input signal for simulation, equal to the reference frequency of the generator. From the output of the repeater on the U1A chip, the signal goes to the low-pass filter assembled on U1B, which passes high frequencies and delays signals and noise with a power supply frequency of 50 Hz and two subsequent harmonics (100 Hz, 150 Hz).

Next, the signal goes to the MDM amplifier circuit, implemented by me on separate chips and discrete elements. The block diagram and description of the MDM amplifier operation are given below.

Amplifiers with signal modulation-demodulation (MDM amplifiers) implement the conversion of a slowly changing input voltage into an alternating voltage, which is then amplified and again converted into a slowly changing (but already amplified) voltage using a phase-sensitive demodulator. The AC amplifier significantly reduces the errors associated with the zero drift.

A typical structure of the MDM amplifier is shown in Fig. 1. In addition to the modulator (M), the AC amplifier (A1), the demodulator (DM) and the feedback divider (B), this structure also includes a low-pass filter (LPF) and a DC amplifier (A2). The LPF filter is needed to smooth out the output voltage spikes that occur when switching the modulator keys. The purpose of introducing the A2 amplifier into the structure is to provide a low output resistance, a large output signal and to increase the overall gain. If the gain of the A1 amplifier is large enough, then the zero drift of the A2 amplifier practically does not increase the instability of the initial level of the amplifier as a whole. The modulator and demodulator are controlled by the voltage generated by the control oscillator (CO).

Due to the periodic switching of the switches S1S2 and S3S4 of the U2 switch, the polarity of the voltage arriving at the input of the op-amp of the U4 modulator periodically changes. In this way, the slowly changing voltage Uin is converted into an alternating rectangular voltage, the frequency of which is set by the control oscillator CO. The alternating voltage is amplified in the differential amplifier U5 (A1) and then converted by the demodulator Cdem-S1[U3] into a pulsating voltage, the average value of which is the amplified signal Uout.

The demodulator operates as follows. During one half-period of the control voltage generated by the CO, the switch S1[U3] is closed and the capacitor Cdem is charged to the amplitude of the voltage existing at that time at the output of U5. The polarity of these pulses depends on the phase relationship (0° or 180°) between the amplified alternating voltage and the control voltage coming from the CO.

Next, the demodulated signal passes through the first and second order low-pass filter U6 (LPF), is smoothed and fed to the input of the differentiator op amp U7, which subtracts the zero-adjustment voltage coming from U9 from the inverted signal.

At the output of the U7 op-amp we have a constant voltage, which is a function of the phase between the amplified input signal of the antenna and the signal of the control generator (CO), the value of which is displayed on the arrow indicator with added diode protection, placed on a remote unit (A) together with the antenna. An illustration of the v310 device in operation can be seen in the video on YouTube at the link below (you must enable English subtitles).

https://www.youtube.com/watch?v=LtA9IYrRQyQ&ab_channel=YuriSmolyansky

Now, let’s speak about the disadvantages of the current version of the device. The video managed to capture very contrasting jumps of the torsion field (1:400) that often occur within one house, that need additional adjustments and zero setting during the operation.

It is clear that the device is far from perfect, and its circuit needs additional revision. I will take into account and consider any useful and workable improvements to the circuit sent by you.

The electronic circuit of the device is published for free use.

It is prohibited to use it, in whole or in part, for commercial purposes.

Any changes to the circuit are allowed at the choice of the developers.

[05/06/2024] – [23/05/2025]

Yuri Smolyansky

yms.1972@gmail.com

Download PI-NT-A v329[B2] description in PDF-format

====================================================================================

[19/01/2025]

Since then, the PINTA device has been enhanced and improved. A series of experiments were conducted with the improved prototype on 14/01/2025 (19:15-19:30 JRS [UTC+2.00h]). The improved scheme and video of the experiments with the Currie GPZ (2nd order) are given below. During the experiments with the prototype, no significant disturbances in Solar activity were observed in the ranges observed by NOAA satellites and published on the website (see photo below). In the center (on a blue background) the passage of a comet across the solar disk is recorded.

================================================================================= 

File with improved scheme of PINTA v329[B2] can be downloaded here

================================================================================= 

============================================================================

[20/01/2025]                                 Wishing Good Luck to Everybody involved!

====================================================================

Short video on You-Tube with English/Russian/Hebrew subtitles.

====================================================================

=================================================================

For comments, suggestions, feedbacks, questions, please 

email: yms.1972@gmail.com

------------------------------------------------------------------------------------------------

Or, Join Our group at Facebook:

https://www.facebook.com/groups/274316179684415/

------------------------------------------------------------------------------------------------